Closed-Loop Discontinuous Modulation Technique for Capacitor Voltage Ripples and Switching Losses Reduction in Modular Multilevel Converters

In this paper, a new discontinuous modulation technique is presented for the operation of the modular multilevel converter (MMC). The modulation technique is based on adding a zero sequence to the original modulation signals so that the MMC arms are clamped to the upper or lower terminals of the dc-link bus. The clamping intervals are controlled according to the absolute value of the output current to minimize the switching losses of the MMC. A significant reduction in the capacitor voltage ripples is achieved, especially when operating with low modulation indices. Furthermore, a circulating current control strategy suitable for this modulation technique is also proposed. Simulation and experimental results under various operating points are reported along with evaluation and comparison results against a conventional carrier-based pulse width modulation method.

[1]  M. Ciobotaru,et al.  Effect of redundant sub-module utilization on modular multilevel converters , 2012, 2012 IEEE International Conference on Industrial Technology.

[2]  H. P. Mohammadi,et al.  A Transformerless Medium-Voltage STATCOM Topology Based on Extended Modular Multilevel Converters , 2011, IEEE Transactions on Power Electronics.

[3]  D. Boroyevich,et al.  A Carrier-Based PWM Strategy With Zero-Sequence Voltage Injection for a Three-Level Neutral-Point-Clamped Converter , 2012, IEEE Transactions on Power Electronics.

[4]  Felix Kammerer,et al.  Straight forward vector control of the Modular Multilevel Converter for feeding three-phase machines over their complete frequency range , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[5]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[6]  Manfred Winkelnkemper,et al.  A modular direct converter for transformerless rail interties , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[7]  Maryam Saeedifard,et al.  Operation, Control, and Applications of the Modular Multilevel Converter: A Review , 2015, IEEE Transactions on Power Electronics.

[8]  Ahmet M. Hava,et al.  A high performance generalized discontinuous PWM algorithm , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[9]  K. Ilves,et al.  Modular multilevel converter ac motor drives with constant torque form zero to nominal speed , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[10]  Reza Iravani,et al.  Dynamic performance of a modular multilevel back-to-back HVDC system , 2010, 2011 IEEE Power and Energy Society General Meeting.

[11]  J. Pou,et al.  Optimal injection of harmonics in circulating currents of modular multilevel converters for capacitor voltage ripple minimization , 2013, 2013 IEEE ECCE Asia Downunder.

[12]  Rik W. De Doncker,et al.  Control of the Modular Multi-Level Converter for minimized cell capacitance , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[13]  Makoto Hagiwara,et al.  A Medium-Voltage Motor Drive With a Modular Multilevel PWM Inverter , 2010, IEEE Transactions on Power Electronics.

[14]  Kui Wang,et al.  Voltage Balancing and Fluctuation-Suppression Methods of Floating Capacitors in a New Modular Multilevel Converter , 2013, IEEE Transactions on Industrial Electronics.

[15]  Maryam Saeedifard,et al.  Analysis of voltage balancing limits in modular multilevel converters , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[16]  Rainer Marquardt,et al.  An innovative modular multilevel converter topology suitable for a wide power range , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.

[17]  Staffan Norrga,et al.  Modular Multilevel Converter AC Motor Drives With Constant Torque From Zero to Nominal Speed , 2014, IEEE Transactions on Industry Applications.

[18]  J. Pou,et al.  Improving capacitor voltage ripples and power losses of modular multilevel converters through discontinuous modulation , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[19]  V. Agelidis,et al.  'Dead-band' PWM switching patterns , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[20]  R. Marquardt.  A new modular voltage source inverter topology , 2003 .

[21]  Josep Pou,et al.  A Comprehensive Study of a Hybrid Modulation Technique for the Neutral-Point-Clamped Converter , 2009, IEEE Transactions on Industrial Electronics.

[22]  Seung-Ki Sul,et al.  Control of the Modular Multilevel Converter for variable-speed drives , 2012, 2012 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES).

[23]  Jong-Beom Lee,et al.  A validated accurate fault location approach by applying noise cancellation technique , 2012 .

[24]  I. Hasegawa,et al.  Startup and low-speed operation of an adjustable-speed motor driven by a modular multilevel cascade inverter (MMCI) , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[25]  Georgios Konstantinou,et al.  Circulating Current Injection Methods Based on Instantaneous Information for the Modular Multilevel Converter , 2015, IEEE Transactions on Industrial Electronics.

[26]  H. Akagi,et al.  Control and Experiment of Pulsewidth-Modulated Modular Multilevel Converters , 2009, IEEE Transactions on Power Electronics.

[27]  Marc Hiller,et al.  A new highly modular medium voltage converter topology for industrial drive applications , 2009, 2009 13th European Conference on Power Electronics and Applications.

[28]  Samir Kouro,et al.  Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters , 2015, IEEE Transactions on Power Electronics.

[29]  Manfred Winkelnkemper,et al.  Low output frequency operation of the Modular Multi-Level Converter , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[30]  Kurt Friedrich,et al.  Modern HVDC PLUS application of VSC in Modular Multilevel Converter topology , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[31]  L.G. Franquelo,et al.  The age of multilevel converters arrives , 2008, IEEE Industrial Electronics Magazine.

[32]  M. Saeedifard,et al.  Minimization of the capacitor voltage fluctuations of a modular multilevel converter by circulating current control , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[33]  Hans-Peter Nee,et al.  On dynamics and voltage control of the Modular Multilevel Converter , 2009, 2009 13th European Conference on Power Electronics and Applications.

[34]  Georgios Konstantinou,et al.  Active Redundant Submodule Configuration in Modular Multilevel Converters , 2013, IEEE Transactions on Power Delivery.

[35]  Georgios Konstantinou,et al.  Control strategy to balance operation of parallel connected legs of modular multilevel converters , 2013, 2013 IEEE International Symposium on Industrial Electronics.