Reliability-Based Design Optimization Method of Turbine Disk with Transformed Deterministic Constraints

AbstractTo improve the computational efficiency of the reliability-based design optimization (RBDO) of a complex structure with nonlinear and implicit limit-state function, the single-loop-single-vector (SLSV)-limit-state factor (LSF) (SLSV-LSF) method was developed by fully considering the advantages of the SLSV approach and the LSF method to transform uncertain constraints into deterministic constraints. The mathematical models of SLSV and LSF were established and the basic RBDO process of the SLSV-LSF method is presented. The shape optimization of an aeroengine turbine disk was completed based on the proposed method. From the reliability sensitivity analysis of the turbine disk, it is revealed that an uncertain constraint of average circumferential stress can be transformed into a deterministic constraint and material density can be regarded as a deterministic variable. Through the min-mass shape design of the turbine disk based on different approaches, it is demonstrated that the developed method main...

[1]  Cheng-Wei Fei,et al.  Nonlinear dynamic probabilistic design of turbine disk-radial deformation using extremum response surface method-based support vector machine of regression , 2015 .

[2]  Antonio Harrison Sánchez,et al.  Limit state function identification using Support Vector Machines for discontinuous responses and disjoint failure domains , 2008 .

[3]  Timothy K. Hasselman,et al.  Reliability based structural design optimization for practical applications , 1997 .

[4]  Ren-Jye Yang,et al.  Experience with approximate reliability-based optimization methods II: an exhaust system problem , 2005 .

[5]  Manolis Papadrakakis,et al.  Design optimization of steel structures considering uncertainties , 2005 .

[6]  Bai Guangchen,et al.  Optimum control for nonlinear dynamic reliability radial deformation of Turbine casing with T-LSSVM , 2015 .

[7]  A. Kiureghian,et al.  Optimization algorithms for structural reliability , 1991 .

[8]  Zissimos P. Mourelatos,et al.  A Single-Loop Approach for System Reliability-Based Design Optimization , 2006, DAC 2006.

[9]  B. Munwar Basha,et al.  Reliability assessment of internal stability of reinforced soil structures: A pseudo-dynamic approach , 2010 .

[10]  Jian Chen,et al.  Optimal design of aeroengine turbine disc based on kriging surrogate models , 2011 .

[11]  Chun Man Chan,et al.  Optimal performance-based design of wind sensitive tall buildings considering uncertainties , 2012 .

[12]  K. Choi,et al.  Inverse analysis method using MPP-based dimension reduction for reliability-based design optimization of nonlinear and multi-dimensional systems , 2008 .

[13]  Jianye Ching,et al.  Transforming reliability limit-state constraints into deterministic limit-state constraints , 2008 .

[14]  B. Munwar Basha,et al.  Reliability Based Earthquake Resistant Design for Internal Stability of Reinforced Soil Structures , 2011 .

[15]  Bijan Kumar Roy,et al.  Reliability-based-design-optimization of base isolated buildings considering stochastic system parameters subjected to random earthquakes , 2013 .

[16]  Kyung K. Choi,et al.  A NEW STUDY ON RELIABILITY-BASED DESIGN OPTIMIZATION , 1999 .

[17]  Jianye Ching,et al.  Approximate optimization of systems with high-dimensional uncertainties and multiple reliability constraints , 2008 .

[18]  Zissimos P. Mourelatos,et al.  Impact of uncertainty quantification on design: an engine optimisation case study , 2006 .

[19]  Seymour M.J. Spence,et al.  Efficient algorithms for the reliability optimization of tall buildings , 2011 .

[20]  Dianyin Hu,et al.  Probabilistic design for turbine disk at high temperature , 2011 .

[21]  Hong-Zhong Huang,et al.  Bayesian framework for probabilistic low cycle fatigue life prediction and uncertainty modeling of aircraft turbine disk alloys , 2013 .

[22]  C. Fei,et al.  Optimum Control for Nonlinear Dynamic Radial Deformation of Turbine Casing with Time-Varying LSSVM , 2015 .

[23]  A. Naess,et al.  System reliability analysis by enhanced Monte Carlo simulation , 2009 .

[24]  Michel van Tooren,et al.  Review of uncertainty-based multidisciplinary design optimization methods for aerospace vehicles , 2011 .

[25]  G. Gary Wang,et al.  Reliable design space and complete single-loop reliability-based design optimization , 2008, Reliab. Eng. Syst. Saf..

[26]  Sankaran Mahadevan,et al.  First-Order Approximation Methods in Reliability-Based Design Optimization , 2005 .

[27]  Nozomu Kogiso,et al.  Modified Single-Loop-Single-Vector Method for Efficient Reliability-Based Design Optimization , 2012 .

[28]  Artur Ulbrich,et al.  Life assessment of turbine components based on deterministic and probabilistic procedures , 2004 .

[29]  Cheng-Wei Fei,et al.  Novel method and model for dynamic reliability optimal design of turbine blade deformation , 2014 .

[30]  Guang-chen Bai,et al.  Transient reliability optimization for turbine disk radial deformation , 2016 .

[31]  D G Elms,et al.  Structural safety–issues and progress , 2004 .

[32]  Cheng-Wei Fei,et al.  Study on the theory, method and model for mechanical dynamic assembly reliability optimization , 2014 .

[33]  Ren-Jye Yang,et al.  Experience with approximate reliability-based optimization methods , 2003 .

[34]  Dianyin Hu,et al.  Probabilistic Analysis on Turbine Disk Under LCF-Creep , 2008 .

[35]  I. Doltsinis,et al.  ROBUST DESIGN OF STRUCTURES USING OPTIMIZATION METHODS , 2004 .