Optimal dynamic design of a planar slider-crank mechanism with a joint clearance

[1]  Ferdinand Freudenstein,et al.  Dynamic Analysis of Mechanical Systems With Clearances—Part 1: Formation of Dynamic Model , 1971 .

[2]  Ferdinand Freudenstein,et al.  Dynamic Analysis of Mechanical Systems With Clearances—Part 2: Dynamic Response , 1971 .

[3]  M. T. Bengisu,et al.  A Theoretical and Experimental Investigation of Contact Loss in the Clearances of a Four-Bar Mechanism , 1986 .

[4]  Hamid M. Lankarani,et al.  A Contact Force Model With Hysteresis Damping for Impact Analysis of Multibody Systems , 1989 .

[5]  Jianmin Zhu,et al.  The effects of joint clearance on position and orientation deviation of linkages and manipulators , 2000 .

[6]  Jianmin Zhu,et al.  Uncertainty analysis of planar and spatial robots with joint clearances , 2000 .

[7]  N. Morita,et al.  A New Optimization Method for Dynamic Design of Planar Linkage With Clearances at Joints—Optimizing the Mass Distribution of Links to Reduce the Change of Joint Forces , 2002 .

[8]  Arend L. Schwab,et al.  A comparison of revolute joint clearance models in the dynamic analysis of rigid and elastic mechanical systems , 2002 .

[9]  Jorge Ambrósio,et al.  Impact of Rigid and Flexible Multibody Systems: Deformation Description and Contact Models , 2003 .

[10]  Jorge Ambrósio,et al.  Revolute joints with clearance in multibody systems , 2004 .

[11]  J. Ambrósio,et al.  Modelling lubricated revolute joints in multibody mechanical systems , 2004 .

[12]  Ming-June Tsai,et al.  Kinematic sensitivity analysis of linkage with joint clearance based on transmission quality , 2004 .

[13]  Jorge Ambrósio,et al.  A study on dynamics of mechanical systems including joints with clearance and lubrication , 2006 .

[14]  Yunqing Zhang,et al.  Dynamics of spatial flexible multibody systems with clearance and lubricated spherical joints , 2009 .

[15]  S. Erkaya,et al.  Determining link parameters using genetic algorithm in mechanisms with joint clearance , 2009 .

[16]  Singiresu S. Rao.  Engineering Optimization : Theory and Practice , 2010 .

[17]  H. Lankarani,et al.  Spatial rigid-multibody systems with lubricated spherical clearance joints: modeling and simulation , 2010 .

[18]  Yimin Zhang,et al.  Robust tolerance design for function generation mechanisms with joint clearances , 2010 .

[19]  Jorge Ambrósio,et al.  Numerical and experimental investigation on multibody systems with revolute clearance joints , 2011 .

[20]  Margarida F. Machado,et al.  On the continuous contact force models for soft materials in multibody dynamics , 2011 .

[21]  M. Ghazavi,et al.  Stabilizing slider-crank mechanism with clearance joints , 2012 .

[22]  Qiang Tian,et al.  Dynamics and control of a spatial rigid-flexible multibody system with multiple cylindrical clearance joints , 2012 .

[23]  Onesmus Muvengei,et al.  Numerical study of parametric effects on the dynamic response of planar multi-body systems with differently located frictionless revolute clearance joints , 2012 .

[24]  Hamid M. Lankarani,et al.  Compliant contact force models in multibody dynamics : evolution of the Hertz contact theory , 2012 .

[25]  Yang Zhao,et al.  Dynamic behaviour analysis of planar mechanical systems with clearance in revolute joints using a new hybrid contact force model , 2012 .

[26]  S. M. Varedi,et al.  Optimal free-defect synthesis of four-bar linkage with joint clearance using PSO algorithm , 2013 .

[27]  Genliang Chen,et al.  A unified approach to the accuracy analysis of planar parallel manipulators both with input uncertainties and joint clearance , 2013 .