Three-dimensional numerical simulation of a droplet generation in a double T-junction microchannel

Abstract. With MEMS technology developing rapidly, the microfluidic droplet technology has been employed into many biological or chemical experiments. To satisfy the increasingly high demands in various applications of the microfluidic chips, the size of the droplet needs accurate control. We have designed and performed a three-dimensional numerical simulation of a droplet generation in a double T-junction microchannel by a level-set method in COMSOL5.0 for discussing the process of the droplet formation and the influences on the size of the droplet. We have studied out that the flow rate ratio, the continuous phase viscosity, the interfacial tension, and the contact angle influence the size of the droplet. The effective droplet diameter increases when the flow rate ratio and the interfacial tension increase. It decreases when the continuous phase viscosity and the contact angle increase.

[1]  Yonghao Zhang,et al.  Droplet formation in a T-shaped microfluidic junction , 2009 .

[2]  D. Pang,et al.  Controllable synthesis of nanocrystals in droplet reactors. , 2017, Lab on a chip.

[3]  Rongye Zheng,et al.  Three dimensional simulations of droplet formation in symmetric and asymmetric T-junctions using the color-gradient lattice Boltzmann model , 2015 .

[4]  Xueye Chen,et al.  A novel design for passive misscromixers based on topology optimization method , 2016, Biomedical microdevices.

[5]  R. W. Rambach,et al.  Droplet trapping and fast acoustic release in a multi-height device with steady-state flow. , 2017, Lab on a chip.

[6]  Xueye Chen,et al.  Numerical and experimental investigation on micromixers with serpentine microchannels , 2016 .

[7]  Xueye Chen,et al.  Numerical investigation on layout optimization of obstacles in a three-dimensional passive micromixer. , 2017, Analytica chimica acta.

[8]  S. Quake,et al.  Dynamic pattern formation in a vesicle-generating microfluidic device. , 2001, Physical review letters.

[9]  Zhaomiao Liu,et al.  Micro-PIV investigation of the internal flow transitions inside droplets traveling in a rectangular microchannel , 2017 .

[10]  F. Chollet,et al.  New regime of droplet generation in a T-shape microfluidic junction , 2013 .

[11]  R. Boom,et al.  Lattice Boltzmann simulations of droplet formation in a T-shaped microchannel. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[12]  Jingmin Li,et al.  A microfluidic design to provide a stable and uniform in vitro microenvironment for cell culture inspired by the redundancy characteristic of leaf areoles. , 2017, Lab on a chip.

[13]  Peter Kim,et al.  Droplet microfluidics for synthetic biology. , 2017, Lab on a chip.

[14]  I. Parkin,et al.  Large-Area Fabrication of Droplet Pancake Bouncing Surface and Control of Bouncing State. , 2017, ACS nano.

[15]  Gautam Biswas,et al.  Electric field mediated spraying of miniaturized droplets inside microchannel , 2017, Electrophoresis.

[16]  G. Whitesides,et al.  Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up. , 2006, Lab on a chip.

[17]  Xueye Chen,et al.  Review in manufacturing methods of nanochannels of bio-nanofluidic chips , 2018 .

[18]  Pingan Zhu,et al.  Passive and active droplet generation with microfluidics: a review. , 2016, Lab on a chip.

[19]  Jian-Hua Wang,et al.  Manipulation of droplets in microfluidic systems , 2010 .

[20]  Xueye Chen,et al.  Rapid fabrication of a four-layer PMMA-based microfluidic chip using CO2-laser micromachining and thermal bonding , 2016 .

[21]  Long Wu,et al.  Numerical simulations of droplet formation in a cross‐junction microchannel by the lattice Boltzmann method , 2008 .

[22]  Kai Zhang,et al.  On-chip manipulation of continuous picoliter-volume superparamagnetic droplets using a magnetic force. , 2009, Lab on a chip.

[23]  Gunilla Kreiss,et al.  A conservative level set method for two phase flow II , 2005, J. Comput. Phys..

[24]  Yangcheng Lu,et al.  Extraction-Derived Self-Organization of Colloidal Photonic Crystal Particles within Confining Aqueous Droplets , 2013 .

[25]  Tuncay Alan,et al.  Droplet control technologies for microfluidic high throughput screening (μHTS). , 2017, Lab on a chip.

[26]  Xueye Chen,et al.  From structures, packaging to application: A system-level review for micro direct methanol fuel cell , 2017 .

[27]  Dongqing Li,et al.  Deformation and Interaction of Droplet Pairs in a Microchannel Under ac Electric Fields , 2015 .

[28]  P. Rinaldo,et al.  A Droplet Digital PCR Method for Severe Combined Immunodeficiency Newborn Screening. , 2017, The Journal of molecular diagnostics : JMD.

[29]  David A. Weitz,et al.  Double Emulsion Droplets as Microreactors for Synthesis of Mesoporous Hydroxyapatite , 2009 .

[30]  S. Yao,et al.  Visualizing millisecond chaotic mixing dynamics in microdroplets: A direct comparison of experiment and simulation. , 2012, Biomicrofluidics.

[31]  Shangfu Li,et al.  Controllable gas-liquid phase flow patterns and monodisperse microbubbles in a microfluidic T-junction device , 2006 .

[32]  Jin Ho Jung,et al.  On-demand droplet splitting using surface acoustic waves. , 2016, Lab on a chip.

[33]  Chong Liu,et al.  An effective PDMS microfluidic chip for chemiluminescence detection of cobalt (II) in water , 2013 .

[34]  G. Tang,et al.  Lattice Boltzmann simulation of droplet formation in T-junction and flow focusing devices , 2014 .

[35]  J. Delville,et al.  Real-time droplet caliper for digital microfluidics , 2012 .

[36]  Fujun Wang,et al.  Flow rate effect on droplet control in a co-flowing microfluidic device , 2007 .

[37]  Yuanjin Zhao,et al.  Emerging Droplet Microfluidics. , 2017, Chemical reviews.

[38]  Xueye Chen,et al.  A novel passive micromixer designed by applying an optimization algorithm to the zigzag microchannel , 2017 .