Research on Equivalent Material Properties and Modal Analysis Method of Stator System of Permanent Magnet Motor With Concentrated Winding

Establishing an accurate stator system modal analysis model is of great significance for the vibration and noise analysis of the motor, scholars still have some controversy about how to set the material properties of the stator core and winding in modal analysis. First, the equivalent models of the stator core and winding was analyzed, the initial value of equivalent material parameters was determined. Second, the finite element models were used to analyze the influence of the equivalent material parameters on the natural frequency, a correction method of equivalent material parameters was proposed. Third, the modal of the stator core and the stator core with winding were tested by the moving force method. The finite element analysis results are consistent with the modal test results. Some influence laws of equivalent material parameters on natural frequency are obtained. The proposed correction method of equivalent material parameters helps to quickly determine the equivalent material properties of the stator core and windings. Setting the properties of the stator core and the winding material to the orthotropic materials can ensure the accuracy of the modal analysis.

[1]  Zheng Li,et al.  Modal Analysis of Electromagnetic Resonance for Multi-Degree-of-Freedom Spherical Motor , 2018, 2018 21st International Conference on Electrical Machines and Systems (ICEMS).

[2]  Liang Wu,et al.  Analytical Calculation of Armature Reaction Field of the Interior Permanent Magnet Motor , 2018, Energies.

[3]  Yi Li,et al.  Accurate modelling and modal analysis of stator system in permanent magnet synchronous motor with concentrated winding for vibration prediction , 2018, IET Electric Power Applications.

[4]  Fangwu Ma,et al.  Design and Optimization of IPM Motor Considering Flux Weakening Capability and Vibration for Electric Vehicle Applications , 2018 .

[5]  C. Espanet,et al.  Natural frequencies analytical modeling of small industrial radial flux permanent magnet motors , 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

[6]  Noureddine Bouhaddi,et al.  Structural dynamics of electric machine stators: Modelling guidelines and identification of three-dimensional equivalent material properties for multi-layered orthotropic laminates , 2015 .

[7]  Changsheng Zhu,et al.  Identification of laminated core and winding's physical parameters by stator's modal testings , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[8]  Seok-Myeong Jang,et al.  Vibration Analysis and Measurements Through Prediction of Electromagnetic Vibration Sources of Permanent Magnet Synchronous Motor Based on Analytical Magnetic Field Calculations , 2012, IEEE Transactions on Magnetics.

[9]  E. Helerea,et al.  Three-phase squirrel-cage induction motor modal analyses. Theoretical and experimental aspects , 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[10]  F. Neumayer,et al.  Analytical determination of the orthotropic material behavior of stator bars in the range of the end windings and determination of the material characteristics of the orthotropic composite space brackets via experimental modal analysis and FE- calculation , 2012, 2012 XXth International Conference on Electrical Machines.

[11]  R. Nilssen,et al.  Magnetic forces and vibration in permanent magnet machines with non-overlapping concentrated windings: A review , 2012, 2012 IEEE International Conference on Industrial Technology.

[12]  S. Singhal,et al.  Effect of laminated core on rotor mode shape of large high speed induction motor , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[13]  Shuguang Zuo,et al.  Stator FEM modeling of permanent magnet synchronous motor for electric vehicle driving based on structural vibration analysis , 2010, The 2nd International Conference on Information Science and Engineering.

[14]  P. Pillay,et al.  Young's modulus for laminated machine structures with particular reference to switched reluctance motor vibrations , 2004, IEEE Transactions on Industry Applications.

[15]  Pragasen Pillay,et al.  Low-vibration design of switched reluctance motors for automotive applications using modal analysis , 2003 .

[16]  Pragasen Pillay,et al.  Resonant frequencies and mode shapes of switched reluctance motors , 2001 .

[17]  P. Pillay,et al.  An investigation into vibration in switched reluctance motors , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[18]  S. Mori,et al.  Effect of Coils on Natural Frequencies of Stator Cores in Small Induction Motors , 1987, IEEE Transactions on Energy Conversion.

[19]  Chen Yun-hu,et al.  Research on calculation method of motor lamination core vibration characteristics , 2014 .

[20]  Wang Fengxiang,et al.  Vibration and Modal Analysis of Stator of Large Induction Motors , 2007 .