Evaluation of carbonized waste tire for development of novel shape stabilized composite phase change material for thermal energy storage.

[1]  L. Arteaga-Pérez,et al.  Waste tires pyrolysis kinetics and reaction mechanisms explained by TGA and Py-GC/MS under kinetically-controlled regime. , 2020, Waste management.

[2]  Pushpendra Kumar Singh Rathore,et al.  Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review , 2019, Construction and Building Materials.

[3]  W. Yan,et al.  A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams , 2019, International Journal of Heat and Mass Transfer.

[4]  Rouhollah Ahmadi,et al.  Development of graphitic domains in carbon foams for high efficient electro/photo-to-thermal energy conversion phase change composites , 2019, Chemical Engineering Journal.

[5]  M. Frigione,et al.  Phase Change Materials for Energy Efficiency in Buildings and Their Use in Mortars , 2019, Materials.

[6]  M. Fang,et al.  Lauric-stearic acid eutectic mixture/carbonized biomass waste corn cob composite phase change materials: Preparation and thermal characterization , 2019, Thermochimica Acta.

[7]  T. Akiyama,et al.  Cotton-derived carbon sponge as support for form-stabilized composite phase change materials with enhanced thermal conductivity , 2019, Solar Energy Materials and Solar Cells.

[8]  Zhiwei Yang,et al.  Preparation of porous carbonized woods impregnated with lauric acid as shape-stable composite phase change materials , 2019, Applied Thermal Engineering.

[9]  Ziye Ling,et al.  A comprehensive review on phase change material emulsions: Fabrication, characteristics, and heat transfer performance , 2019, Solar Energy Materials and Solar Cells.

[10]  Lixian Sun,et al.  Fabrication and characterization of novel meso-porous carbon/n-octadecane as form-stable phase change materials for enhancement of phase-change behavior , 2019, Journal of Materials Science & Technology.

[11]  Inamuddin,et al.  Recent developments in phase change materials for energy storage applications: A review , 2019, International Journal of Heat and Mass Transfer.

[12]  Chaoming Wang,et al.  Preparation and Thermal Properties of 1-Hexadecanol-Palmitic Acid Eutectic Mixture/Activated Carbon Composite Phase Change Material for Thermal Energy Storage , 2019, ChemistrySelect.

[13]  Hongyi Gao,et al.  Shape-stabilized phase change materials based on porous supports for thermal energy storage applications , 2019, Chemical Engineering Journal.

[14]  F. Liu,et al.  Low-cost, three-dimension, high thermal conductivity, carbonized wood-based composite phase change materials for thermal energy storage , 2018, Energy.

[15]  S. M. Sadrameli,et al.  Carbon based material included-shaped stabilized phase change materials for sunlight-driven energy conversion and storage: An extensive review , 2018, Solar Energy.

[16]  Nasiru I. Ibrahim,et al.  Evaluation of solar collector designs with integrated latent heat thermal energy storage: A review , 2018 .

[17]  Chen Wang,et al.  Synthesis of porous carbon from cotton using an Mg(OH)2 template for form-stabilized phase change materials with high encapsulation capacity, transition enthalpy and reliability , 2018 .

[18]  Juanjuan Li,et al.  Leakage-proof phase change composites supported by biomass carbon aerogels from succulents , 2018 .

[19]  Zhaohui Huang,et al.  A novel composite Phase change material of Stearic Acid/Carbonized sunflower straw for thermal energy storage , 2018 .

[20]  Hongyi Gao,et al.  Introduction of organic-organic eutectic PCM in mesoporous N-doped carbons for enhanced thermal conductivity and energy storage capacity , 2018 .

[21]  Alessandro Romagnoli,et al.  Application of high temperature phase change materials for improved efficiency in waste-to-energy plants. , 2017, Waste management.

[22]  M. Fang,et al.  Honeycomb-like structured biological porous carbon encapsulating PEG: A shape-stable phase change material with enhanced thermal conductivity for thermal energy storage , 2018 .

[23]  M. Fang,et al.  Form stable composite phase change materials from palmitic-lauric acid eutectic mixture and carbonized abandoned rice: Preparation, characterization, and thermal conductivity enhancement , 2017 .

[24]  Wei Yang,et al.  Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide , 2017 .

[25]  Shuqin Chen,et al.  A review on phase change material application in building , 2017 .

[26]  G. Fang,et al.  Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: A review , 2017 .

[27]  S. Kalaiselvam,et al.  Enhanced thermal performance and study the influence of sub cooling on activated carbon dispersed eutectic PCM for cold storage applications , 2017 .

[28]  Zhonghao Rao,et al.  Review on clay mineral-based form-stable phase change materials: Preparation, characterization and applications , 2017 .

[29]  Tawfik A. Saleh,et al.  Adsorptive desulfurization of dibenzothiophene from fuels by rubber tyres-derived carbons: Kinetics and isotherms evaluation , 2016 .

[30]  T. Saleh,et al.  Influence of conversion parameters of waste tires to activated carbon on adsorption of dibenzothiophene from model fuels , 2016 .

[31]  Tawfik A. Saleh,et al.  Influence of acidic and basic treatments of activated carbon derived from waste rubber tires on adsorptive desulfurization of thiophenes , 2016 .

[32]  Amal S. Al-Rahbi,et al.  Production of activated carbons from waste tyres for low temperature NOx control. , 2016, Waste management.

[33]  V. Tyagi,et al.  Long-term thermal and chemical reliability study of different organic phase change materials for thermal energy storage applications , 2016, Journal of Thermal Analysis and Calorimetry.

[34]  Z. Zainal,et al.  Shape-stabilised n-octadecane/activated carbon nanocomposite phase change material for thermal energy storage , 2015 .

[35]  Surface characterization and sorption efficacy of tire‐obtained carbon: experimental and semiempirical study of rhodamine B adsorption , 2015 .

[36]  R. K. Sharma,et al.  Developments in organic solid–liquid phase change materials and their applications in thermal energy storage , 2015 .

[37]  H. Cui,et al.  Preparation, characterization and thermal properties of dodecanol/cement as novel form-stable composite phase change material , 2013 .

[38]  Lei Cao,et al.  Synthesis and thermal properties of shape-stabilized lauric acid/activated carbon composites as phase change materials for thermal energy storage , 2012 .