Highly Sensitive Humidity Sensor Based on Oblique Carbon Nanoplumes

In this work, we fabricated three carbon nanoplume structured samples under different temperatures using a simple hot filament physical vapor deposition (HFPVD) process, and investigated the role of surface morphology, defects, and graphitic content on relative humidity (RH) sensing performances. The Van der Drift growth model and oblique angle deposition (OAD) technique of growing a large area of uniformly aligned and inclined oblique arrays of carbon nanoplumes (CNPs) on a catalyst-free silicon substrate was demonstrated. The optimal growing temperature of 800 °C was suitable for the formation of nanoplumes with larger surface area, more defect sites, and less graphitic content, compared to the other samples that were prepared. As expected, a low detection limit, high response, capability of reversible behavior, and rapid response/recovery speed with respect to RH variation, was achieved without additional surface modification or chemical functionalization. The holes’ depletion has been described as a RH sensing mechanism that leads to the increase of the conduction of the CNPs with increasing RH levels.

[1]  Tao Yu,et al.  Interactions of carbon nanotubes with the nitromethane-water mixture governing selective adsorption of energetic molecules from aqueous solution. , 2015, Physical chemistry chemical physics : PCCP.

[2]  Shukai Duan,et al.  A flexible humidity sensor based on KC–MWCNTs composites , 2016 .

[3]  P. Feng,et al.  Properties of one-dimensional tilted carbon nanorod arrays synthesized by the catalyst-assisted oblique angle deposition technique , 2009 .

[4]  P. Feng,et al.  Electrical and structural characterizations of one-dimensional carbon nanostructures synthesized at ambient pressure , 2008 .

[5]  Jin Chu,et al.  Nanostructures and sensing properties of ZnO prepared using normal and oblique angle deposition techniques , 2012 .

[6]  Jerzy P. Łukaszewicz.  Carbon Films for Humidity Sensors , 2006 .

[7]  S. Salvatori,et al.  Effect of nanostructure and back contact material on the field emission properties of carbon films , 2002 .

[8]  Jose Maria Kenny,et al.  NO2 gas sensitivity of carbon nanotubes obtained by plasma enhanced chemical vapor deposition , 2003 .

[9]  Jijun Zhao,et al.  Gas molecule adsorption in carbon nanotubes and nanotube bundles , 2002 .

[10]  Jianshi Tang,et al.  Large-Area High-Performance Flexible Pressure Sensor with Carbon Nanotube Active Matrix for Electronic Skin. , 2018, Nano letters.

[11]  K. S. Nagaraja,et al.  Electrical and humidity sensing properties of Chromium(III) oxide–tungsten(VI) oxide composites , 2003 .

[12]  Nam Ki Min,et al.  Novel resistive-type humidity sensor based on multiwall carbon nanotube/polyimide composite films , 2010 .

[13]  Nam-Trung Nguyen,et al.  Solvent-free fabrication of biodegradable hot-film flow sensor for noninvasive respiratory monitoring , 2017 .

[14]  Jose Maria Kenny,et al.  Role of defects on the gas sensing properties of carbon nanotubes thin films: experiment and theory , 2004 .

[15]  F. Dong,et al.  Explore on the quantitative analysis of specific surface area on sensitivity of polyacrylic acid-based QCM ammonia sensor , 2017 .

[16]  Ming Ma,et al.  Capacitive humidity sensor based on amorphous carbon film/n-Si heterojunctions , 2010 .

[17]  Jong Kyu Kim,et al.  Silica nanorod-array films with very low refractive indices. , 2005, Nano letters.

[18]  Zhong Lin Wang,et al.  Direct-Current Nanogenerator Driven by Ultrasonic Waves , 2007, Science.

[19]  Erdan Gu,et al.  Layer-by-Layer assembly and humidity sensitive behavior of poly(ethyleneimine)/multiwall carbon nanotube composite films , 2006 .

[20]  Ali Aldalbahi,et al.  A simple route to carbon micro- and nanorod hybrid structures by physical vapour deposition , 2012 .

[21]  Litao Liu,et al.  Humidity Sensitivity of Multi-Walled Carbon Nanotube Networks Deposited by Dielectrophoresis , 2009, Sensors.

[22]  Tuo Li,et al.  Carbon nanotubes humidity sensor based on high testing frequencies , 2011 .

[23]  Angela D Lueking,et al.  Morphological, structural, and chemical effects in response of novel carbide derived carbon sensor to NH3, N2O, and air. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[24]  Claude Pellet,et al.  Fast response Humidity Sensors for a Medical Microsystem , 2003 .

[25]  S. R. Manohara,et al.  Humidity Sensing Properties of Multiwalled Carbon NanotubePolyvinyl Alcohol Nanocomposite Films , 2016 .

[26]  Y. C. Chan,et al.  Fast response resistive humidity sensitivity of polyimide/multiwall carbon nanotube composite films , 2011 .

[27]  P. Feng,et al.  A novel compact design of calibration equipment for gas and thermal sensors. , 2011, The Review of scientific instruments.

[28]  C. F. Clewett,et al.  Ammonia adsorption on multi-walled carbon nanotubes , 2007 .

[29]  Dominique Baillargeat,et al.  Microwave flexible gas sensor based on polymer multi wall carbon nanotubes sensitive layer , 2017 .

[30]  Jianting Zhang,et al.  Study of humidity sensors based on nanostructured carbon films produced by physical vapor deposition , 2013 .

[31]  P. Poncharal,et al.  Water-vapor effect on the electrical conductivity of a single-walled carbon nanotube mat , 2000 .

[32]  Kong,et al.  Nanotube molecular wires as chemical sensors , 2000, Science.