Defects detection by infrared thermography with a new microwave excitation system

This study presents a NDT method using infrared thermography associated with a microwave excitation. The advantages of such stimulation lie in the volumic absorption of incoming waves which lead to a greater sounded depth. This method is applied to two types of samples. The first is a concrete slab reinforced with CFRP on which a bonding failure is inserted and the second is a wooden plate on which a metallic insert is placed on the back face. The device generating the microwaves is made of a commercial magnetron associated with a pyramidal horn antenna. An infrared camera is placed on the same side as the stimulated surface and thermograms are recorded at regular intervals. The whole assembly is placed in a protective room against high frequencies. The incident power density leads to heating of less than 1 °C of the surface of the samples. The thermograms show a higher temperature rise in front of the defect area. The non-uniformity of the beam, leads us to treat the thermograms with an algorithm of contrast. These first results show the interest of the microwave excitation to detect defects deeper than in the case of surface excitation.

[1]  Ermanno G. Grinzato,et al.  Quantitative infrared thermography in buildings , 1998 .

[2]  Gennaro Cuccurullo,et al.  A procedure to measure electromagnetic skin depth in microwave heating , 2004 .

[3]  H. Wiggenhauser.  Active IR-applications in civil engineering , 2002 .

[4]  H. Hamilton,et al.  Quantitative infrared thermography inspection for FRP applied to concrete using single pixel analysis , 2013 .

[5]  J.-C. Krapez,et al.  Industrial applications of infrared thermography , 1999 .

[6]  Kerim Guney.  Simple Design Method for Optimum Gain Pyramidal Horns , 2001 .

[7]  Xavier Maldague,et al.  A study of defect depth using neural networks in pulsed phase thermography: modelling, noise, experiments , 1998 .

[8]  Koungsuk Kim,et al.  Quantitative determination of a subsurface defect of reference specimen by lock-in infrared thermography , 2008 .

[9]  Chih-Hung Chiang,et al.  Defect detection of concrete structures using both infrared thermography and elastic waves , 2008 .

[10]  Constantinos A. Balaras,et al.  Infrared thermography for building diagnostics , 2002 .

[11]  Miguel Pinzolas,et al.  A new procedure for power efficiency optimization in microwave ovens based on thermographic measurements and load location search , 2007 .

[12]  F. Taillade,et al.  Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures , 2011 .

[13]  Ronald Kitchen.  Introduction to RF and microwave radiation , 2001 .

[14]  Carosena Meola,et al.  A new approach for estimation of defects detection with infrared thermography , 2007 .

[15]  Umberto Galietti,et al.  New data analysis to evaluate defects in composite materials using microwaves thermography , 2012 .

[16]  Juan Monzó-Cabrera,et al.  Feedback control procedure for energy efficiency optimization of microwave-heating ovens , 2009 .

[17]  C. Zombolas,et al.  Advanced Measurements of Microwave Oven Leakage , 2001 .

[18]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[19]  Ronald Kitchen.  RF and microwave radiation safety handbook , 2001 .

[20]  Michael Forde,et al.  Application of infrared thermography to the non-destructive testing of concrete and masonry bridges , 2003 .

[21]  Gennaro Cuccurullo,et al.  IR temperature measurements in microwave heating , 2002 .