Evaluation of the reservoir permeability of anthracite coals by geophysical logging data

article i nfo Permeability is one of the most significant reservoir parameters. It is commonly obtained by experiment, history simulation, injection/falloff well test and geophysical logging. Among these, geophysical logging remains as the most economic and efficient technique in evaluating coal permeability in the vicinity of an open-hole. In this paper, geophysical logging data are used to evaluate the coal reservoir permeability for the No. 3 coal seam in the southern Qinshui Basin (Fanzhuang and Zhengzhuang coal zones). Ideally coal reservoirs consist of coal matrix and fracture networks that can be represented by a model called a collection of sheets. Based on the model, coal reservoir permeability can be quantitatively calculated using the theoretical formula ofkf=8.50×10 �4 w 2 φf, in which fracture width (w) and fracture porosity (φf) were obtained by dual laterolog and density logging data, respectively. Calculative results show that coal reservoir permeability ranged from 0.017 mD to 0.617 mD for the Fanzhuang coal zone and from 0.047 mD to 1.337 mD for the Zhengzhuang coal zone. The permeability decreases with coal burial depth, reflecting variations in penetration capability of coal reservoirs at varying depths. Comparing results with those from injection/ falloff well tests, however, shows that the model-calculated permeability is slightly higher. This is expected because the model did not include the influence from coal anisotropy.

[1]  J. Charbuciński,et al.  Application of spectrometric nuclear borehole logging for reserves estimation and mine planning at Callide coalfields open-cut mine , 2003 .

[2]  C. Karacan,et al.  A numerical evaluation on the effects of impermeable faults on degasification efficiency and methane emissions during underground coal mining , 2008 .

[3]  Guoliang Chen,et al.  Influence of gas production induced volumetric strain on permeability of coal , 1997 .

[4]  Yanbin Yao,et al.  Coal reservoir characteristics and coalbed methane resource assessment in Huainan and Huaibei coalfields, Southern North China , 2009 .

[5]  C. Karacan.  Elastic and shear moduli of coal measure rocks derived from basic well logs using fractal statistics and radial basis functions , 2009 .

[6]  L. H. Reiss,et al.  The reservoir engineering aspects of fractured formations , 1980 .

[7]  Victor Rudolph,et al.  Evaluation of gas content of coalbed methane reservoirs with the aid of geophysical logging technology , 2009 .

[8]  Yanbin Yao,et al.  Preliminary evaluation of the coalbed methane production potential and its geological controls in the Weibei Coalfield, Southeastern Ordos Basin, China , 2009 .

[9]  J. Pashin,et al.  Structural control of coalbed methane production in Alabama , 1998 .

[10]  Victor Rudolph,et al.  Evaluation of coal structure and permeability with the aid of geophysical logging technology , 2009 .

[11]  O. Faivre,et al.  The Dual Laterolog Response In Fractured Rocks , 1985 .

[12]  C. Karacan.  Reservoir rock properties of coal measure strata of the Lower Monongahela Group, Greene County (Southwestern Pennsylvania), from methane control and production perspectives , 2009 .

[13]  Huang Wen-hui,et al.  A Comprehensive Model for Evaluating Coalbed Methane Reservoirs in China , 2008 .

[14]  G. E. Archie.  The electrical resistivity log as an aid in determining some reservoir characteristics , 1942 .

[15]  Christopher Mark,et al.  In situ estimation of roof rock strength using sonic logging , 2010 .