Fracture toughness of two phase WC-Co cermets
暂无分享,去创建一个
[1] K. Ravichandran. A survey of toughness in ductile phase composites , 1992 .
[2] A. Evans,et al. The mechanical properties of ceramic composites produced by melt oxidation , 1992 .
[3] A. Argon,et al. Creep resistance of CMSX-3 nickel base superalloy single crystals , 1992 .
[4] M. Ashby,et al. The deformation and fracture of constrained metal sheets , 1991 .
[5] L. Zhonghua,et al. Hydrostatic stresses and their effect on the macroflow behavior and microfracture mechanism of two-phase alloys , 1991 .
[6] D. Dimiduk,et al. Strength and ductile-phase toughening in the two-phase Nb/Nb5Si3 alloys , 1991 .
[7] A. Evans,et al. Ductile reinforcement toughening of γ-TiAl: Effects of debonding and ductility , 1990 .
[8] P. A. Mataga. Deformation of crack-bridging ductile reinforcements in toughened brittle materials , 1989 .
[9] A. Evans,et al. Toughening in composites of Al2O3 reinforced with Al , 1989 .
[10] M. Ashby,et al. Flow characteristics of highly constrained metal wires , 1989 .
[11] N. H. Macmillan,et al. Properties and microstructures of Lanxide® Al2O3-Al ceramic composite materials , 1989 .
[12] J. Gurland,et al. Applicability of the critical strain fracture criterion to WC-Co hard metals , 1988 .
[13] Robert M. McMeeking,et al. On the toughness of brittle materials reinforced with a ductile phase , 1988 .
[14] H. F. Fischmeister,et al. On the fracture toughness of cemented carbides , 1988 .
[15] A. Evans,et al. Small-scale crack bridging and the fracture toughness of particulate-reinforced ceramics , 1988 .
[16] A. Evans,et al. On the toughening of ceramics by strong reinforcements , 1986 .
[17] A. Evans,et al. Fracture Mechanics of Ceramics , 1986 .
[18] E. A. Almond,et al. The influence of composition, phase transformation and varying the relative F.C.C. and H.C.P. phase contents on the properties of dilute CoWC alloys , 1984 .
[19] J. Gurland,et al. Science of Hard Materials , 1983 .
[20] J. A. Peck,et al. Quantitative fractography of WC-Co cermets by Auger spectroscopy , 1981 .
[21] J. Gurland,et al. The fracture toughness of WC-Co two-phase alloys—A preliminary model , 1980 .
[22] J. Gurland,et al. The fracture toughness of WCCo alloys measured on single-edge notched beam specimens precracked by electron discharge machining , 1978 .
[23] Karl-Heinz Schwalbe,et al. On the influence of microstructure on crack propagation mechanisms and fracture toughness of metallic materials , 1977 .
[24] J. Chermant,et al. Fracture toughness and fracture of WC-Co composites , 1976 .
[25] G. T. Hahn,et al. Metallurgical factors affecting fracture toughness of aluminum alloys , 1975 .
[26] H. Nordberg,et al. The fracture toughness of cemented tungsten carbides , 1974 .