Reliability analysis and condition-based maintenance of systems with dependent degrading components based on thermodynamic physics-of-failure

[1]  Qianmei Feng,et al.  Reliability modeling for dependent competing failure processes with changing degradation rate , 2014 .

[2]  David W. Coit,et al.  Reliability Analysis for Multi-Component Systems Subject to Multiple Dependent Competing Failure Processes , 2014, IEEE Transactions on Reliability.

[3]  Lei Jiang,et al.  Reliability and Maintenance Modeling for Dependent Competing Failure Processes With Shifting Failure Thresholds , 2012, IEEE Transactions on Reliability.

[4]  David W. Coit,et al.  Reliability analysis for dependent failure processes and dependent failure threshold , 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.

[5]  Zhigang Tian,et al.  Condition based maintenance optimization for multi-component systems using proportional hazards model , 2011, Reliab. Eng. Syst. Saf..

[6]  David W. Coit,et al.  Reliability and maintenance modeling for systems subject to multiple dependent competing failure processes , 2010 .

[7]  Michael M. Khonsari,et al.  On the Relationship Between Wear and Thermal Response in Sliding Systems , 2010 .

[8]  M. Burkschat,et al.  Systems with Failure-Dependent Lifetimes of Components , 2009, Journal of Applied Probability.

[9]  Alaa Chateauneuf,et al.  Opportunistic policy for optimal preventive maintenance of a multi-component system in continuous operating units , 2009, Comput. Chem. Eng..

[10]  David W. Coit,et al.  Simultaneous Quality and Reliability Optimization for Microengines Subject to Degradation , 2009, IEEE Transactions on Reliability.

[11]  Michael M. Khonsari,et al.  On the thermodynamics of degradation , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[12]  R. Ritchie,et al.  Micron-Scale Friction and Sliding Wear of Polycrystalline Silicon Thin Structural Films in Ambient Air , 2008, Journal of Microelectromechanical Systems.

[13]  Hong-Zhong Huang,et al.  Reliability modeling for dependent competitive failure processes , 2008, 2008 Annual Reliability and Maintainability Symposium.

[14]  Chanseok Park,et al.  Stochastic degradation models with several accelerating variables , 2006, IEEE Transactions on Reliability.

[15]  Amilcar Ramalho,et al.  The relationship between wear and dissipated energy in sliding systems , 2006 .

[16]  Steven M. Cox,et al.  Stochastic models for degradation-based reliability , 2005 .

[17]  Hoang Pham,et al.  Reliability modeling of multi-state degraded systems with multi-competing failures and random shocks , 2005, IEEE Trans. Reliab..

[18]  M. Tencer,et al.  Arrhenius average temperature: the effective temperature for non-fatigue wearout and long term reliability in variable thermal conditions and climates , 2004, IEEE Transactions on Components and Packaging Technologies.

[19]  K. Watson,et al.  Characterization and reliability of TaN thin film resistors , 2004, 2004 IEEE International Reliability Physics Symposium. Proceedings.

[20]  Samuel Kotz,et al.  On the Effect of Redundancy for Systems with Dependent Components , 2003 .

[21]  D. M. Tanner,et al.  Wear Mechanisms in a Reliability Methodology , 2003, SPIE MOEMS-MEMS.

[22]  Georgia-Ann Klutke,et al.  The availability of inspected systems subject to shocks and graceful degradation , 2002, IEEE Trans. Reliab..

[23]  Hongzhou Wang,et al.  A survey of maintenance policies of deteriorating systems , 2002, Eur. J. Oper. Res..

[24]  M. Marseguerra,et al.  Simulation modelling of repairable multi-component deteriorating systems for 'on condition' maintenance optimisation , 2002, Reliab. Eng. Syst. Saf..

[25]  J. Celis,et al.  Expressing wear rate in sliding contacts based on dissipated energy , 2002 .

[26]  Tieling Zhang,et al.  Availability and reliability of system with dependent components and time-varying failure and repair rates , 2001, IEEE Trans. Reliab..

[27]  Rommert Dekker,et al.  A review of multi-component maintenance models with economic dependence , 1997, Math. Methods Oper. Res..

[28]  A. Schottl,et al.  A reliability model of a system with dependent components , 1996, IEEE Trans. Reliab..

[29]  C. Joseph Lu,et al.  Using Degradation Measures to Estimate a Time-to-Failure Distribution , 1993 .

[30]  Mahmut Parlar,et al.  A survey of maintenance models for multi-unit systems , 1991 .

[31]  Z. Ş. Deligönül.  An approximate solution of the integral equation of renewal theory , 1985, Journal of Applied Probability.

[32]  D. Coit,et al.  Reliability analysis of systems with dependent degrading components based on thermodynamic physics-of-failure analysis , 2012 .

[33]  Reiner W. Kuehl,et al.  Stability of thin film resistors - Prediction and differences base on time-dependent Arrhenius law , 2009, Microelectron. Reliab..

[34]  Antoine Grall,et al.  A condition-based maintenance policy with non-periodic inspections for a two-unit series system , 2005, Reliab. Eng. Syst. Saf..

[35]  Jeremy A. Walraven,et al.  MEMS Reliability: Infrastructure, Test Structures, Experiments, and Failure Modes , 2000 .

[36]  David W. Coit,et al.  System reliability modeling considering the dependence of component environmental influences , 1999, Annual Reliability and Maintainability. Symposium. 1999 Proceedings (Cat. No.99CH36283).

[37]  L. C. Thomas,et al.  A survey of maintenance and replacement models for maintainability and reliability of multi-item systems , 1986 .