Microstructural characteristics of Alloy 718 and Waspaloy and their influence on flank wear during turning

[1]  R. Koester,et al.  Hot Hardness of Selected Borides, Oxides, and Carbides to 1900°C , 1967 .

[2]  Minyoung Lee.  High temperature hardness of tungsten carbide , 1983 .

[3]  Yafang Han,et al.  Effect of particle size on the creep rate of superalloy Inconel 718 , 1987 .

[4]  Srikumar Banerjee,et al.  Some aspects of the precipitation of metastable intermetallic phases in INCONEL 718 , 1992 .

[5]  S. Cockcroft,et al.  INCLUSION PRECIPITATION IN SUPERALLOYS , 1992 .

[6]  P. C. Jindal,et al.  Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning , 1999 .

[7]  Mathias Göken,et al.  Microstructural properties of superalloys investigated by nanoindentations in an atomic force microscope , 1999 .

[8]  Stereological estimation of microstructural parameters of nickel-based superalloy Waspaloy using TEM methods , 2001 .

[9]  D. Srinivasan.  Effect of long-time exposure on the evolution of minor phases in Alloy 718 , 2004 .

[10]  A. Pineau,et al.  Gamma double prime precipitation kinetic in Alloy 718 , 2008 .

[11]  B. Ramamoorthy,et al.  Study on the machinability characteristics of superalloy Inconel 718 during high speed turning , 2009 .

[12]  Helmi Attia,et al.  Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718 , 2010 .

[13]  M. Dehmas,et al.  TEM Study of High-Temperature Precipitation of Delta Phase in Inconel 718 Alloy , 2011 .

[14]  L. Nyborg,et al.  Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and Waspaloy , 2012 .

[15]  Dahu Zhu,et al.  Tool wear characteristics in machining of nickel-based superalloys , 2013 .

[16]  S. Jacobson,et al.  Initial degradation of cemented carbides for rock drilling — Model studies of the tribological contact against rock , 2015 .

[17]  A. Malakizadi.  Optimisation of Machining Operations by means of Finite Element Method and Tailored Experiments , 2015 .

[18]  J. Dusza,et al.  Anisotropic nanoscratch resistance of WC grains in WC–Co composite , 2015 .

[19]  Sein Leung Soo,et al.  High performance cutting of advanced aerospace alloys and composite materials , 2015 .

[20]  S. Jacobson,et al.  Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool , 2016 .

[21]  T. Pollock,et al.  Alloy design for aircraft engines. , 2016, Nature materials.

[22]  Anders Wretland,et al.  Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply , 2017 .

[23]  L. N. López de Lacalle,et al.  Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy , 2017 .