Process operation at constant temperature may enhance the solar-thermal production of hydrogen from water. [Also see Report by Muhich et al.] The potential of solar radiation as an infinite resource of renewable energy is widely recognized. The challenge is to convert it as efficiently as possible into useful energy forms such as hydrogen or liquid carbonaceous fuels. Thermochemical cycles are a number of consecutive chemical reactions (≥2) that lower the maximum temperature compared to a single chemical reaction. Typical temperatures for these cycles to reach full conversion range from 800°C to 2000°C. The necessary solar heat can be generated by concentrating optics that direct the solar radiation on a single point—in solar towers or central receiver systems. To use the solar power efficiently and economically, losses must be minimized, with major factors being the minimization of re-radiation and the reduction of gases that are used to transport the reactant. As pointed out by Muhich et al. (1) on page 540 of this issue, a particularly important factor in this respect is the minimization of temperature differences between reaction steps. However, the necessary temperatures are high, and it has yet to be proven that the materials and components are stable over a long time to make the processes economically attractive.
[1]
N. Gokon,et al.
Thermochemical two-step water splitting by internally circulating fluidized bed of NiFe2O4 particles: Successive reaction of thermal-reduction and water-decomposition steps
,
2011
.
[2]
Ulrich Vogt,et al.
Solar Thermochemical CO2 Splitting Utilizing a Reticulated Porous Ceria Redox System
,
2012
.
[3]
Wojciech Lipiński,et al.
EFFICIENCY OF TWO-STEP SOLAR THERMOCHEMICAL NON-STOICHIOMETRIC REDOX CYCLES WITH HEAT RECOVERY
,
2012
.
[4]
W. Chueh,et al.
High-Flux Solar-Driven Thermochemical Dissociation of CO2 and H2O Using Nonstoichiometric Ceria
,
2010,
Science.
[5]
Xinhua Liang,et al.
Efficient Generation of H2 by Splitting Water with an Isothermal Redox Cycle
,
2013,
Science.
[6]
Christian Sattler,et al.
Test operation of a 100 kW pilot plant for solar hydrogen production from water on a solar tower
,
2011
.
[7]
Nathan P. Siegel,et al.
Factors Affecting the Efficiency of Solar Driven Metal Oxide Thermochemical Cycles
,
2013
.
[8]
Christian Sattler,et al.
Solar-heated rotary kiln for thermochemical energy storage
,
2012
.
[9]
Nathan P. Siegel,et al.
A New Reactor Concept for Efficient Solar-Thermochemical Fuel Production
,
2013
.