On the improved properties of injection-molded, carbon nanotube-filled PET/PVDF blends

The mechanisms for improved mechanical and electrical properties of an injection molded, carbon nanotubes (CNTs) filled, polyethylene terephthalate (PET)/polyvinylidene fluoride (PVDF) blend have been investigated. It is found that the improved properties are due to the formation of a triple-continuous structure in the CNT-filled polymer blend; CNT segregates in the continuous PET phase, forming a continuous conductive path to provide the composite an electrical short circuit. The continuous PVDF phase free from CNT, on the other hand, offers crack bridging and the interface between the PET and PVDF phases provides crack deflection for the composite. As a result of such a combination, the CNT-filled PET/PVDF has better electrical conductivity, strength and elongation than the CNT-filled PET with the same CNT loading. The segregation of CNT in the PET phase of the CNT-filled PET/PVDF blend is due to the thermodynamic driving force that favors the segregation of CNT in the PET.

[1]  Eric Vanlathem,et al.  Selective localization of carbon black in immiscible polymer blends: A useful tool to design electrical conductive composites , 1994 .

[2]  Loreto Daza,et al.  New polymer bipolar plates for polymer electrolyte membrane fuel cells: Synthesis and characterization , 2002 .

[3]  R. Abbaschian,et al.  On the flow behavior of constrained ductile phases , 1993 .

[4]  Theodore M. Besmann,et al.  Carbon/Carbon Composite Bipolar Plate for Proton Exchange Membrane Fuel Cells , 2000 .

[5]  Isa Bar-On,et al.  Technical cost analysis for PEM fuel cells , 2002 .

[6]  B. D. Agarwal,et al.  Analysis and Performance of Fiber Composites , 1980 .

[7]  M. Matsuo,et al.  Mechanical and Electric Properties of Ultra-High-Molecular Weight Polyethylene and Carbon Black Particle Blends , 1998 .

[8]  Paul Leonard Adcock,et al.  New materials for polymer electrolyte membrane fuel cell current collectors , 1999 .

[9]  George Marsh.  Fuel cell materials , 2001 .

[10]  Paul Leonard Adcock,et al.  Bipolar plate materials for solid polymer fuel cells , 2000 .

[11]  M. Sumita,et al.  Electrical characteristics of fluorinated carbon black‐filled poly(vinylidene fluoride) composites , 2001 .

[12]  I. Kinloch,et al.  Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites , 2003 .

[13]  Lorraine F. Francis,et al.  Electrical and mechanical behavior of carbon black-filled poly(vinyl acetate) latex-based composites , 2001 .

[14]  F. Bueche.  Electrical resistivity of conducting particles in an insulating matrix , 1972 .

[15]  R. Hornung,et al.  Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells , 1998 .

[16]  C. Friedrich,et al.  Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene , 2004 .

[17]  Shigeo Asai,et al.  Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black , 1991 .

[18]  R. Mallant,et al.  Use of stainless steel for cost competitive bipolar plates in the SPFC , 2000 .

[19]  Optoelectronic device substrates , 2001 .

[20]  Jan-Chan Huang,et al.  Carbon black filled conducting polymers and polymer blends , 2002 .

[21]  Wenxue Yu,et al.  The conduction mechanism of carbon black-filled poly(vinylidene fluoride) composite , 2003 .

[22]  T. Burchell,et al.  Carbon composite for a PEM fuel cell bipolar plate , 1997 .