Occurrence and removal of titanium at full scale wastewater treatment plants: implications for TiO2 nanomaterials.

Titanium dioxide nanoparticles increasingly will be used in commercial products and have a high likelihood of entering municipal sewage that flows to centralized wastewater treatment plants (WWTPs). Treated water (effluent) from WWTPs flows into rivers and lakes where nanoparticles may pose an ecological risk. To provide exposure data for risk assessment, titanium concentrations in raw sewage and treated effluent were determined for 10 representative WWTPs that use a range of unit processes. Raw sewage titanium concentrations ranged from 181 to 1233 µg L(-1) (median of 26 samples was 321 µg L(-1)). The WWTPs removed more than 96% of the influent titanium, and all WWTPs had effluent titanium concentrations of less than 25 µg L(-1). To characterize the morphology and presence of titanium oxide nanoparticles in the effluent, colloidal materials were isolated via rota-evaporation, dialysis and lyophilization. High resolution transmission electron microscopy and energy dispersive X-ray analysis indicated the presence of spherical titanium oxide nanoparticles (crystalline and amorphous) on the order of 4 to 30 nm in diameter in WWTP effluents. This research provides clear evidence that some nanoscale particles will pass through WWTPs and enter aquatic systems and offers a methodological framework for collecting and analyzing titanium-based nanomaterials in complex wastewater matrices.

[1]  Kiril Hristovski,et al.  Stability of commercial metal oxide nanoparticles in water. , 2008, Water research.

[2]  C. Tyler,et al.  Review: Do engineered nanoparticles pose a significant threat to the aquatic environment? , 2010, Critical reviews in toxicology.

[3]  R D Tyagi,et al.  Engineered nanoparticles in wastewater and wastewater sludge--evidence and impacts. , 2010, Waste management.

[4]  Khara D Grieger,et al.  Setting the limits for engineered nanoparticles in European surface waters - are current approaches appropriate? , 2009, Journal of environmental monitoring : JEM.

[5]  M A Kiser,et al.  Titanium nanomaterial removal and release from wastewater treatment plants. , 2009, Environmental science & technology.

[6]  S. Chae,et al.  Membrane filtration of fullerene nanoparticle suspensions: effects of derivatization, pressure, electrolyte species and concentration. , 2010, Journal of colloid and interface science.

[7]  Tae-Hyun Bae,et al.  Effect of TiO2 nanoparticles on fouling mitigation of ultrafiltration membranes for activated sludge filtration , 2005 .

[8]  O. Choi,et al.  Nitrification inhibition by silver nanoparticles. , 2009, Water science and technology : a journal of the International Association on Water Pollution Research.

[9]  V. Sharma,et al.  Aggregation and toxicity of titanium dioxide nanoparticles in aquatic environment—A Review , 2009, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[10]  A. Dhillon,et al.  Characterisation of inorganic microparticles in pigment cells of human gut associated lymphoid tissue. , 1996, Gut.

[11]  P. Westerhoff,et al.  Biogenic nanoscale colloids in wastewater effluents. , 2010, Environmental science & technology.

[12]  C. Manning,et al.  Rutile solubility in H2O, H2O–SiO2, and H2O–NaAlSi3O8 fluids at 0.7–2.0 GPa and 700–1000 °C: Implications for mobility of nominally insoluble elements , 2008 .

[13]  R. Scholz,et al.  Possibilities and limitations of modeling environmental exposure to engineered nanomaterials by probabilistic material flow analysis , 2010, Environmental toxicology and chemistry.

[14]  A. Kahru,et al.  From ecotoxicology to nanoecotoxicology. , 2010, Toxicology.

[15]  V. Gadhamshetty,et al.  Appreciating the role of carbon nanotube composites in preventing biofouling and promoting biofilms on material surfaces in environmental engineering: a review. , 2010, Biotechnology advances.

[16]  Vincent M Rotello,et al.  Surface properties dictate uptake, distribution, excretion, and toxicity of nanoparticles in fish. , 2010, Small.

[17]  A. Dotson,et al.  Dissolved Organic Nitrogen Fractionation , 2007 .

[18]  C. Chin,et al.  Removal of nanoparticles from CMP wastewater by magnetic seeding aggregation. , 2006, Chemosphere.

[19]  Elisabeth Müller,et al.  Removal of oxide nanoparticles in a model wastewater treatment plant: influence of agglomeration and surfactants on clearing efficiency. , 2008, Environmental science & technology.

[20]  Maria Dusinska,et al.  Nanomaterials for environmental studies: classification, reference material issues, and strategies for physico-chemical characterisation. , 2010, The Science of the total environment.

[21]  Yun Shen,et al.  Influence of biofilm on the transport of fullerene (C60) nanoparticles in porous media. , 2010, Water research.

[22]  J. Leenheer,et al.  Characterization and origin of polar dissolved organic matter from the Great Salt Lake , 2004 .

[23]  Menachem Elimelech,et al.  Microbial cytotoxicity of carbon-based nanomaterials: implications for river water and wastewater effluent. , 2009, Environmental science & technology.

[24]  Massimo Bovenzi,et al.  Nanoparticle dermal absorption and toxicity: a review of the literature , 2009, International archives of occupational and environmental health.

[25]  John Crittenden,et al.  Impact of natural organic matter and divalent cations on the stability of aqueous nanoparticles. , 2009, Water research.

[26]  T. E. Cloete,et al.  Nanotechnology and Water Treatment: Applications and Emerging Opportunities , 2008 .

[27]  Jérôme Labille,et al.  Aging of TiO(2) nanocomposites used in sunscreen. Dispersion and fate of the degradation products in aqueous environment. , 2010, Environmental pollution.

[28]  Philippe Moulin,et al.  Application of magnetic nanoparticles for UF membrane integrity monitoring at low-pressure operation , 2010 .

[29]  P. Lipp,et al.  Characterization of nanoparticulate fouling and breakthrough during low-pressure membrane filtration , 2009 .

[30]  J. Morrow,et al.  Association of quantum dot nanoparticles with Pseudomonas aeruginosa biofilm. , 2010, Journal of environmental quality.

[31]  Yexin Yin,et al.  Examination of purified single-walled carbon nanotubes on activated sludge process using batch reactors , 2009, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[32]  Christine Ogilvie Robichaud,et al.  Estimates of upper bounds and trends in nano-TiO2 production as a basis for exposure assessment. , 2009, Environmental science & technology.

[33]  J. Rose,et al.  Inorganic manufactured nanoparticles: how their physicochemical properties influence their biological effects in aqueous environments. , 2010, Nanomedicine.

[34]  A. Drews,et al.  Recent advances in membrane bioreactors (MBRs): membrane fouling and membrane material. , 2009, Water research.

[35]  Isamu Tanaka,et al.  Hazard Assessments of Manufactured Nanomaterials , 2010, Journal of occupational health.

[36]  Y. Lowney,et al.  THE ECOLOGICAL EFFECTS OF NANOMATERIALS: A FOCUS ON AQUATIC LIFE , 2008 .

[37]  J. Crittenden,et al.  Toxicity and cellular responses of intestinal cells exposed to titanium dioxide , 2010, Cell Biology and Toxicology.

[38]  B. Nowack,et al.  Occurrence, behavior and effects of nanoparticles in the environment. , 2007, Environmental pollution.

[39]  J. Braun.  Titanium dioxide : A review , 1997 .

[40]  R. Scholz,et al.  Modeled environmental concentrations of engineered nanomaterials (TiO(2), ZnO, Ag, CNT, Fullerenes) for different regions. , 2009, Environmental science & technology.

[41]  J. Leenheer.  Systematic approaches to comprehensive analyses of natural organic matter , 2009 .

[42]  Hongtao Wang,et al.  Stability and aggregation of metal oxide nanoparticles in natural aqueous matrices. , 2010, Environmental science & technology.

[43]  G. Ren,et al.  A review of nanoparticle functionality and toxicity on the central nervous system , 2010, Journal of The Royal Society Interface.

[44]  Jamie R Lead,et al.  Interactions of silver nanoparticles with Pseudomonas putida biofilms. , 2009, Environmental science & technology.

[45]  Roland W. Scholz,et al.  Probabilistic material flow modeling for assessing the environmental exposure to compounds: Methodology and an application to engineered nano-TiO2 particles , 2010, Environ. Model. Softw..

[46]  Enda Cummins,et al.  Ranking initial environmental and human health risk resulting from environmentally relevant nanomaterials , 2010, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[47]  B. Nowack,et al.  Exposure modeling of engineered nanoparticles in the environment. , 2008, Environmental science & technology.

[48]  John C Crittenden,et al.  Stability and removal of water soluble CdTe quantum dots in water. , 2008, Environmental science & technology.

[49]  Loring Nies,et al.  Assessing the impact of nanomaterials on anaerobic microbial communities. , 2008, Environmental science & technology.

[50]  Kiril Hristovski,et al.  Biosorption of nanoparticles to heterotrophic wastewater biomass. , 2010, Water research.

[51]  Armand Masion,et al.  Structural degradation at the surface of a TiO(2)-based nanomaterial used in cosmetics. , 2010, Environmental science & technology.