Model-based fault diagnosis and fault-tolerant control for a nonlinear electro-hydraulic system

This paper proposes a fault-tolerant control strategy for a nonlinear electro-hydraulic system. The fault-tolerant control scheme consists a fault diagnosis system and a reconfigurable controller. The fault diagnosis system is designed based on differential-geometric approach and is robust to system disturbance. Adaptive backstepping method is utilized for realizing the reconfigurable controller. The control performance of the electro-hydraulic system can be guaranteed even in the presence of considered faults.

[1]  Youmin Zhang,et al.  Bibliographical review on reconfigurable fault-tolerant control systems , 2003, Annu. Rev. Control..

[2]  C. D. Persisa,et al.  On the observability codistributions of a nonlinear system , 2000 .

[3]  Noah D. Manring,et al.  Modeling and designing a variable-displacement open-loop pump , 1996 .

[4]  Peter S. Maybeck,et al.  Reconfigurable flight control via multiple model adaptive control methods , 1990, 29th IEEE Conference on Decision and Control.

[5]  Arthur Akers,et al.  Hydraulic Power System Analysis , 2006 .

[6]  Andrew Ball,et al.  The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system , 2005 .

[7]  J. Gerfler.  FAULT DETECTION AND ISOLATION USING PARITY RELATIONS , 2003 .

[8]  Rolf Isermann.  Fault Diagnosis of Machines via Parameter Estimation and Knowledge Processing , 1991 .

[9]  Mohieddine Jelali,et al.  Hydraulic Servo-systems: Modelling, Identification and Control , 2012 .

[11]  Mohammad-Ali Massoumnia,et al.  A geometric approach to failure detection and identification in linear systems , 1986 .

[12]  H. Hammouri,et al.  A differential geometric approach to fault detection and isolation for state affine systems , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[13]  E. C. Kerrigan,et al.  Fault-tolerant control of a ship propulsion system using model predictive control , 1999, 1999 European Control Conference (ECC).

[14]  H. Kimura.  Proceedings of the 39th IEEE Conference on Decision and Control , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[15]  Bin Yao,et al.  Model based fault detection of an electro-hydraulic cylinder , 2005, Proceedings of the 2005, American Control Conference, 2005..

[16]  M. Verhaegen,et al.  A bank of reconfigurable LQG controllers for linear systems subjected to failures , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[17]  Alberto Isidori,et al.  A Geometric Approach to Nonlinear Fault Detection and Isolation , 2000 .

[18]  P.S. Maybeck,et al.  MMAE/MMAC control for bending with multiple uncertain parameters , 1997, IEEE Transactions on Aerospace and Electronic Systems.

[19]  Donald L. Simon,et al.  Application of a Bank of Kalman Filters for Aircraft Engine Fault Diagnostics , 2003 .

[20]  Bin Jiang,et al.  Fault diagnosis based on adaptive observer for a class of non-linear systems with unknown parameters , 2004 .

[21]  R. Patton,et al.  H∞ estimation and robust fault detection , 1997, 1997 European Control Conference (ECC).

[22]  Nahum Shimkin,et al.  Nonlinear Control Systems , 2008 .

[23]  Christopher Edwards,et al.  Sliding mode observers for detection and reconstruction of sensor faults , 2002, Autom..

[24]  Wen Chen,et al.  Observer-based strategies for actuator fault detection, isolation and estimation for certain class of uncertain nonlinear systems , 2007 .

[25]  Karl Johan Åström,et al.  Computer-Controlled Systems: Theory and Design , 1984 .

[26]  A. Isidori,et al.  On the problem of residual generation for fault detection in nonlinear systems and some related facts , 1999, 1999 European Control Conference (ECC).

[27]  Jie Chen,et al.  Design of unknown input observers and robust fault detection filters , 1996 .

[28]  Rolf Isermann,et al.  Process fault detection based on modeling and estimation methods - A survey , 1984, Autom..

[29]  Pedro M. G. Ferreira.  Tracking with sensor failures , 2002, Autom..

[30]  A. Willsky,et al.  Analytical redundancy and the design of robust failure detection systems , 1984 .

[31]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[32]  Jan M. Maciejowski,et al.  MPC fault-tolerant flight control case study: flight 1862 , 2003 .

[33]  Mohammad-Ali Massoumnia,et al.  Generating parity relations for detecting and identifying control system component failures , 1988 .

[34]  A. Willsky,et al.  Failure detection and identification , 1989 .

[35]  Hong Wang,et al.  Actuator fault diagnosis: an adaptive observer-based technique , 1996, IEEE Trans. Autom. Control..

[36]  Farrokh Sassani,et al.  On-line fault diagnosis of hydraulic systems using Unscented Kalman Filter , 2010 .

[37]  Zhang Ren,et al.  A new controller architecture for high performance, robust, and fault-tolerant control , 2001, IEEE Trans. Autom. Control..

[38]  Marcin Witczak.  Modelling and Estimation Strategies for Fault Diagnosis of Non-Linear Systems: From Analytical to Soft Computing Approaches , 2007 .

[39]  R. Patton,et al.  A Review of Parity Space Approaches to Fault Diagnosis , 1991 .

[40]  Michel Kinnaert,et al.  Diagnosis and Fault-Tolerant Control , 2004, IEEE Transactions on Automatic Control.

[41]  Shreekant Gayaka,et al.  Fault Detection, Identification and Accommodation for an Electro-hydraulic System: An Adaptive Robust Approach , 2008 .

[42]  R. Lathe.  Phd by thesis , 1988, Nature.

[43]  Peter I. Corke,et al.  Experimental evaluation of position control methods for hydraulic systems , 2002, IEEE Trans. Control. Syst. Technol..

[44]  Nariman Sepehri,et al.  Hydraulic actuator circuit fault detection using extended Kalman filter , 2003, Proceedings of the 2003 American Control Conference, 2003..

[45]  Marco Münchhof.  Model-Based Fault Detection for a Hydraulic Servo Axis , 2007, Autom..

[46]  N. Sepehri,et al.  A QFT fault-tolerant control for electrohydraulic positioning systems , 2002, IEEE Trans. Control. Syst. Technol..

[47]  D. Mayne.  Nonlinear and Adaptive Control Design [Book Review] , 1996, IEEE Transactions on Automatic Control.

[48]  Rui Liu,et al.  Systematic control of a class of nonlinear systems with application to electrohydraulic cylinder pressure control , 2000, IEEE Trans. Control. Syst. Technol..

[49]  Xidong Tang,et al.  Adaptive actuator failure compensation for cooperating multiple manipulator systems , 2003 .

[50]  Jie Chen,et al.  Robust Model-Based Fault Diagnosis for Dynamic Systems , 1998, The International Series on Asian Studies in Computer and Information Science.

[51]  Darci Odloak,et al.  Observer-based fault diagnosis in chemical plants , 2005 .

[52]  JinJiang.  Fault-tolerant Control Systems--An Introductory Overview , 2005 .

[53]  Mao-Hsiung Chiang,et al.  Velocity Control for a Variable Displacement Hydraulic Servo System Using Adaptive Fuzzy Sliding-Mode Control , 2008 .

[54]  J. Jiang,et al.  Reliable State Feedback Control System Design Against Actuator Failures , 1998, Autom..

[55]  T. F. Lootsma,et al.  Observer-based Fault Detection and Isolation for Nonlinear Systems , 2001 .

[56]  Mogens Blanke,et al.  Adaptive Control Mixer Method for Nonlinear Control Reconfiguration: A Case Study , 2000 .

[57]  Rolf Isermann,et al.  Trends in the Application of Model Based Fault Detection and Diagnosis of Technical Processes , 1996 .

[58]  Chuei-Tin Chang,et al.  Simplification techniques for EKF computations in fault diagnosis—suboptimal gains , 1998 .

[59]  Gildas Besançon,et al.  High-gain observation with disturbance attenuation and application to robust fault detection , 2003, Autom..

[60]  Seiichi Shin,et al.  Fault tolerance of autonomous decentralized adaptive control systems , 1998, Int. J. Syst. Sci..

[61]  Clarence W. de Silva,et al.  Tracking control of an electrohydraulic manipulator in the presence of friction , 1998, IEEE Trans. Control. Syst. Technol..

[62]  Youmin Zhang,et al.  Integrated active fault-tolerant control using IMM approach , 2001 .

[63]  M. Omizo,et al.  Modeling , 1983, Encyclopedic Dictionary of Archaeology.

[64]  Jakob Stoustrup,et al.  Passive fault tolerant control of a double inverted pendulum—a case study , 2003 .

[65]  M. Massoumnia.  A geometric approach to the synthesis of failure detection filters , 1986 .

[66]  Silvio Simani,et al.  Model-based fault diagnosis in dynamic systems using identification techniques , 2003 .

[67]  P. Antsaklis,et al.  Stability of the pseudo-inverse method for reconfigurable control systems , 1991 .

[68]  Janos Gertler,et al.  A new structural framework for parity equation-based failure detection and isolation , 1990, Autom..

[69]  Alberto Isidori,et al.  A geometric approach to nonlinear fault detection and isolation , 2000, IEEE Trans. Autom. Control..

[70]  Septimiu E. Salcudean,et al.  On the nonlinear control of hydraulic servo-systems , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[71]  Petros A. Ioannou,et al.  Accommodation of failures in the F-16 aircraft using adaptive control , 1991, IEEE Control Systems.

[72]  R. Isermann,et al.  Process Fault Diagnosis Based on Process Model Knowledge: Part I—Principles for Fault Diagnosis With Parameter Estimation , 1991 .