Investigation on arrangement of thermoelectric modules based on exhaust gas flow direction to minimize mismatch power loss in TEG arrays

[1]  Y. Ge,et al.  Optimal distribution of heat exchanger area for maximum efficient power of thermoelectric generators , 2022, Energy Reports.

[2]  Yufang Chang,et al.  Performance Interaction Assessment of Automobile Exhaust Thermoelectric Generator and Engine Under Different Operating Conditions , 2022, SSRN Electronic Journal.

[3]  A. Arabhosseini,et al.  Combined cooling of photovoltaic module integrated with thermoelectric generators, by using earthenware water tank and ultrasonic humidifier: An experimental study , 2022, Sustainable Energy Technologies and Assessments.

[4]  A. Shahsavar,et al.  Performance analysis of vortex tube-thermoelectric system in gas stations , 2022, Sustainable Energy Technologies and Assessments.

[5]  Xiaoshun Zhang,et al.  Modular Thermoelectric Generation Arrays Reconfiguration under Heterogeneous Temperature Distribution via Improved Cooperation Search Algorithm: Modelling, Design and HIL Validation , 2022, Applied Thermal Engineering.

[6]  Yuewu Huang,et al.  Energy and exergy analysis of an integrated photovoltaic module and two-stage thermoelectric generator system , 2022, Applied Thermal Engineering.

[7]  H. Kargarsharifabad,et al.  A review on using thermoelectric cooling, heating, and electricity generators in solar energy applications , 2022, Sustainable Energy Technologies and Assessments.

[8]  Ruochen Wang,et al.  Performance optimization of a segmented converging thermoelectric generator for waste heat recovery , 2021, Applied Thermal Engineering.

[9]  Zhichao He,et al.  Performance analysis of a novel Two-stage automobile thermoelectric generator with the Temperature-dependent materials , 2021, Applied Thermal Engineering.

[10]  Edward Rajan Samuel Nadar,et al.  Investigation of novel thermoelectric sensor array configurations operating under non‐uniform temperature distribution conditions for the measurement of maximum output power in an energy harvesting system , 2021, IET Science, Measurement & Technology.

[11]  YanLin Ge,et al.  Performance optimization of a class of combined thermoelectric heating devices , 2020, Science China Technological Sciences.

[12]  Lingen Chen,et al.  Thermoelectric cooler and thermoelectric generator devices: A review of present and potential applications, modeling and materials , 2019, Energy.

[13]  Rui Chen,et al.  Feasibility study on a vehicular thermoelectric generator for both waste heat recovery and engine oil warm-up , 2019, Applied Energy.

[14]  M. C. Torrecilla,et al.  Transient response of a thermoelectric generator to load steps under constant heat flux , 2018 .

[15]  S. Wongwises,et al.  Power generation enhancement with hybrid thermoelectric generator using biomass waste heat energy , 2017 .

[16]  Assmelash A. Negash,et al.  Effect of electrical array configuration of thermoelectric modules on waste heat recovery of thermoelectric generator , 2017 .

[17]  A. Shakouri,et al.  Thermoelectric heat recovery from glass melt processes , 2017 .

[18]  Yi-Hua Liu,et al.  A novel maximum power point tracker for thermoelectric generation system , 2016 .

[19]  Assmelash A. Negash,et al.  Waste heat recovery of a diesel engine using a thermoelectric generator equipped with customized thermoelectric modules , 2016 .

[20]  Sheng Liu,et al.  A study on heat transfer enhancement in the radial direction of gas flow for thermoelectric power generation , 2016 .

[21]  Paolo Mattavelli,et al.  Analysis of Power Processing Architectures for Thermoelectric Energy Harvesting , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[22]  H. K. Ma,et al.  Waste heat recovery using a thermoelectric power generation system in a biomass gasifier , 2015 .

[23]  J. Ji,et al.  Analysis and discussion on the impact of non-uniform input heat flux on thermoelectric generator array , 2015 .

[24]  Jae-Do Park,et al.  Current-Sensorless Power Estimation and MPPT Implementation for Thermoelectric Generators , 2015, IEEE Transactions on Industrial Electronics.

[25]  C. Su,et al.  A research on thermoelectric generator's electrical performance under temperature mismatch conditions for automotive waste heat recovery system , 2015 .

[26]  Andrea Montecucco,et al.  Maximum Power Point Tracking Converter Based on the Open-Circuit Voltage Method for Thermoelectric Generators , 2015, IEEE Transactions on Power Electronics.

[27]  Andrea Montecucco,et al.  The effect of temperature mismatch on thermoelectric generators electrically connected in series and parallel , 2014 .

[28]  Min Chen,et al.  Reconfiguration of Sustainable Thermoelectric Generation Using Wireless Sensor Network , 2014, IEEE Transactions on Industrial Electronics.

[29]  Edgar Sánchez-Sinencio,et al.  Boost Converter With Dynamic Input Impedance Matching for Energy Harvesting With Multi-Array Thermoelectric Generators , 2014, IEEE Transactions on Industrial Electronics.

[30]  Jin Jiang,et al.  Modeling, Prediction, and Experimental Validations of Power Peaks of PV Arrays Under Partial Shading Conditions , 2014, IEEE Transactions on Sustainable Energy.

[31]  Alexander Vargas-Almeida,et al.  Thermoelectric System in Different Thermal and Electrical Configurations: Its Impact in the Figure of Merit , 2013, Entropy.

[32]  Yang Yang,et al.  Wearable thermal energy harvester powered by human foot , 2013 .

[33]  C. Nagamani,et al.  Enhanced Power Generation From PV Array Under Partial Shading Conditions by Shade Dispersion Using Su Do Ku Configuration , 2013, IEEE Transactions on Sustainable Energy.

[34]  C. Q. Su,et al.  Thermal Optimization of the Heat Exchanger in the Vehicular Waste-Heat Thermoelectric Generations , 2012, Journal of Electronic Materials.

[35]  Gaowei Liang,et al.  Analytical model of parallel thermoelectric generator , 2011 .

[36]  Sun Feng-rui,et al.  A numerical model and comparative investigation of a thermoelectric generator with multi-irreversibi , 2011 .

[37]  Yang Yang,et al.  Evaluation of the power-generation capacity of wearable thermoelectric power generator , 2010 .

[38]  J.K. Pedersen,et al.  Numerical Modeling of Thermoelectric Generators With Varing Material Properties in a Circuit Simulator , 2009, IEEE Transactions on Energy Conversion.

[39]  S. Ben-Yaakov,et al.  Modeling and Analysis of Thermoelectric Modules , 2005, IEEE Transactions on Industry Applications.

[40]  N. D. Kaushika,et al.  Energy yield simulations of interconnected solar PV arrays , 2002, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).