Dielectric Constant Engineering of Organic Semiconductors: Effect of Planarity and Conjugation Length

Bulk heterojunction organic solar cells continue to show steady photoconversion efficiency improvements. However, single component organic solar cells are a particularly attractive alternative due to the relative simplicity of device manufacture. It has been proposed that organic semiconductors with a high dielectric constant (≈10) could give rise to spontaneous free charge carrier generation upon photoexcitation. In this manuscript, factors are explored that affect the dielectric constant of organic semiconductors, particularly the optical‐frequency dielectric constant. The properties of monomers, dimers and trimers of two isoelectronic families of materials that have acceptor units composed of one or two dicyanovinylbenzothiadiazole moieties and one to three donor units are compared. The donor components are composed of either fluorenyl or cyclopentadithiophene moieties with the same glycol‐based solubilizing groups. It is found that chromophore planarity and orientation with respect to the substrate, and film density affect the optical and electronic properties of the materials, especially the high‐frequency dielectric constant. The results also indicate that delocalization of the highest occupied and lowest unoccupied molecular orbitals is a critical factor. The dimer with two dicyanovinylbenzothiadiazole moieties and two dithienocyclopentadiene units is found to have the highest optical frequency dielectric constant and overall performance.

[1]  C. Brabec,et al.  Single-Component Organic Solar Cells with Competitive Performance , 2021, Organic Materials.

[2]  C. Brabec,et al.  Molecular Donor–Acceptor Dyads for Efficient Single‐Material Organic Solar Cells , 2020 .

[3]  L. Meng,et al.  Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell , 2020 .

[4]  Jianqi Zhang,et al.  Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency , 2020, Advanced materials.

[5]  R. Havenith,et al.  How Ethylene Glycol Chains Enhance the Dielectric Constant of Organic Semiconductors: Molecular Origin and Frequency Dependence , 2020, ACS applied materials & interfaces.

[6]  M. Zhang,et al.  Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties , 2020, Advanced Energy Materials.

[7]  W. Wang,et al.  A New Oligothiophene-Fullerene Molecule with a Balanced Donor-Acceptor Backbone toward High-Performance Single-Component Organic Solar Cells. , 2019, Angewandte Chemie.

[8]  Yong Cui,et al.  Eco‐Compatible Solvent‐Processed Organic Photovoltaic Cells with Over 16% Efficiency , 2019, Advanced materials.

[9]  C. Brabec,et al.  Thermal-Driven Phase Separation of Double-Cable Polymers Enables Efficient Single-Component Organic Solar Cells , 2019, Joule.

[10]  C. Brabec,et al.  Evidencing Excellent Thermal‐ and Photostability for Single‐Component Organic Solar Cells with Inherently Built‐In Microstructure , 2019, Advanced Energy Materials.

[11]  Jingwen Zhang,et al.  Organic Solar Cell Materials toward Commercialization. , 2018, Small.

[12]  Thuc‐Quyen Nguyen,et al.  Determining the Dielectric Constants of Organic Photovoltaic Materials Using Impedance Spectroscopy , 2018, Advanced Functional Materials.

[13]  Chang Geun Park,et al.  High-Performance Polymer Solar Cell with Single Active Material of Fully Conjugated Block Copolymer Composed of Wide-Band gap Donor and Narrow-Band gap Acceptor Blocks. , 2018, ACS applied materials & interfaces.

[14]  Lijian Zuo,et al.  Tackling Energy Loss for High‐Efficiency Organic Solar Cells with Integrated Multiple Strategies , 2018, Advanced materials.

[15]  Long Ye,et al.  Controlling Blend Morphology for Ultrahigh Current Density in Nonfullerene Acceptor-Based Organic Solar Cells , 2018 .

[16]  R. Friend,et al.  Fine‐Tuning the Energy Levels of a Nonfullerene Small‐Molecule Acceptor to Achieve a High Short‐Circuit Current and a Power Conversion Efficiency over 12% in Organic Solar Cells , 2018, Advanced materials.

[17]  Jean Manca,et al.  High dielectric constant conjugated materials for organic photovoltaics , 2017 .

[18]  P. Meredith,et al.  Engineering dielectric constants in organic semiconductors , 2017 .

[19]  P. Meredith,et al.  Correction: Dielectric constant enhancement of non-fullerene acceptors via side-chain modification. , 2016, Chemical communications.

[20]  Jun Liu,et al.  Diketopyrrolopyrrole-based Conjugated Polymers Bearing Branched Oligo(Ethylene Glycol) Side Chains for Photovoltaic Devices. , 2016, Angewandte Chemie.

[21]  I. Kassal,et al.  Slower carriers limit charge generation in organic semiconductor light-harvesting systems , 2016, Nature Communications.

[22]  A. Zanelli,et al.  Nanoscale Characterization and Unexpected Photovoltaic Behavior of Low Band Gap Sulfur-Overrich-Thiophene/Benzothiadiazole Decamers and Polymers , 2015 .

[23]  J. L. Delgado,et al.  Understanding the Outstanding Power Conversion Efficiency of Perovskite-Based Solar Cells. , 2015, Angewandte Chemie.

[24]  Z. Xie,et al.  Replacing Alkyl with Oligo(ethylene glycol) as Side Chains of Conjugated Polymers for Close π–π Stacking , 2015 .

[25]  K. Eichhorn,et al.  Dielectric function of a poly(benzimidazobenzophenanthroline) ladder polymer , 2015 .

[26]  Paul L. Burn,et al.  Photocarrier drift distance in organic solar cells and photodetectors , 2015, Scientific Reports.

[27]  Paul L. Burn,et al.  Electro-optics of perovskite solar cells , 2014, Nature Photonics.

[28]  J. Hummelen,et al.  Strategy for Enhancing the Dielectric Constant of Organic Semiconductors Without Sacrificing Charge Carrier Mobility and Solubility , 2015 .

[29]  Haydyn D. T. Mertens,et al.  A low-background-intensity focusing small-angle X-ray scattering undulator beamline , 2013 .

[30]  Sean E. Shaheen,et al.  Pathways to a New Efficiency Regime for Organic Solar Cells , 2012 .

[31]  Jan Ilavsky,et al.  Nika : software for two-dimensional data reduction , 2012 .

[32]  M. Wienk,et al.  Quantifying Bimolecular Recombination Losses in Organic Bulk Heterojunction Solar Cells , 2011, Advanced materials.

[33]  J. Nicoud,et al.  Molecular engineering of photoremovable protecting groups for two-photon uncaging. , 2008, Angewandte Chemie.

[34]  A. Dodabalapur,et al.  N-Type Conjugated Materials Based on 2-Vinyl-4,5-dicyanoimidazoles and Their Use in Solar Cells , 2007 .

[35]  K. Müllen,et al.  Poly(2,7-carbazole) and perylene tetracarboxydiimide: a promising donor/acceptor pair for polymer solar cells , 2006 .

[36]  Brian A. Gregg,et al.  Comparing organic to inorganic photovoltaic cells: Theory, experiment, and simulation , 2003 .

[37]  F. Matthias Bickelhaupt,et al.  Chemistry with ADF , 2001, J. Comput. Chem..

[38]  Sanjay Mishra,et al.  Relative permittivities and refractive indices of binary mixtures of cyclohexanone with dichloromethane, trichloromethane, 1,2-dichloroethane, trichloroethene and cyclohexane at T=303.15 K , 1998 .

[39]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .