Effects of calcination and milling on surface properties, rheological behaviour and microstructure of 8 mol% yttria-stabilised zirconia (8 YSZ)

[1]  P. Sarkar,et al.  Development of Monolithic YSZ Porous and Dense Layers through Multiple Slip Casting for Ceramic Fuel Cell Applications , 2012 .

[2]  Jingli Luo,et al.  Porous YSZ impregnated with La0.4Sr0.5Ba0.1TiO3 as a possible composite anode for SOFCs fueled with sour feeds , 2012 .

[3]  P. Sarkar,et al.  Porous electrolyte-supported tubular micro-SOFC design , 2011 .

[4]  Partha Sarkar,et al.  Improved Redox and Thermal Cycling Resistant Tubular Ceramic Fuel Cells , 2011 .

[5]  A. Boccaccini,et al.  Electrophoretic deposition: fundamentals and applications. , 2010, The journal of physical chemistry. B.

[6]  P. Xiao,et al.  The influence of pH on particle packing in YSZ coatings electrophoretically deposited from a non-aqueous suspension , 2010 .

[7]  Guangwei Wang,et al.  Preparation of YSZ solid electrolyte by slip casting and its properties , 2009 .

[8]  P. Xiao,et al.  pH Effect on Electrophoretic Deposition in Non-Aqueous Suspensions and Sintering of YSZ Coatings , 2009 .

[9]  S. Jiang,et al.  Fabrication and characterization of anode-supported tubular solid-oxide fuel cells by slip casting and dip coating techniques , 2009 .

[10]  Jiang Liu,et al.  Slip casting combined with colloidal spray coating in fabrication of tubular anode-supported solid oxide fuel cells , 2008 .

[11]  S. Jiang,et al.  NiO/YSZ, anode-supported, thin-electrolyte, solid oxide fuel cells fabricated by gel casting , 2007 .

[12]  T. Wen,et al.  A study of multilayer tape casting method for anode-supported planar type solid oxide fuel cells (SOFCs) , 2007 .

[13]  S. Jiang,et al.  Lanthanum strontium manganese chromite cathode and anode synthesized by gel-casting for solid oxide fuel cells , 2007 .

[14]  J. Lewis.  Colloidal Processing of Ceramics , 2004 .

[15]  S. Haile.  Fuel cell materials and components , 2003 .

[16]  G. Acres,et al.  Recent advances in fuel cell technology and its applications , 2001 .

[17]  B. Hatton,et al.  Influence of Washing on Zirconia Powder for Electrophoretic Deposition , 2001 .

[18]  S. Singhal.  Advances in solid oxide fuel cell technology , 2000 .

[19]  Dean-Mo Liu,et al.  Particle packing and rheological property of highly-concentrated ceramic suspensions: φm determination and viscosity prediction , 2000 .

[20]  P. Fiévet,et al.  Surface electrochemical properties of mixed oxide ceramic membranes: Zeta-potential and surface charge density , 1997 .

[21]  P. Sarkar,et al.  Electrophoretic Deposition (EPD): Mechanisms, Kinetics, and Application to Ceramics , 1996 .

[22]  N. Minh.  Ceramic Fuel Cells , 1993 .

[23]  A. Bleier,et al.  Effects of pH and Particle Size on the Processing of and the Development of Microstructure in Alumina–Zirconia Composites , 1991 .

[24]  J. Halloran,et al.  Processing and Sintering of Ultrafine MgO‐ZrO2 and (MgO, Y2O3)‐ZrO2 Powders , 1990 .

[25]  A. Heuer,et al.  Alcohol Interaction with Zirconia Powders , 1990 .

[26]  W. H. Rhodes,et al.  Agglomerate and Particle Size Effects on Sintering Yttria‐Stabilized Zirconia , 1981 .

[27]  P. Sarkar,et al.  Effects of Porous Support Microstructure on Performance of Infiltrated Electrodes in Solid Oxide Fuel Cells , 2011 .

[28]  C. Guizard,et al.  Colloidal Stability for Concentrated Zirconia Aqueous Suspensions , 2009 .

[29]  Laxmidhar Besra,et al.  A review on fundamentals and applications of electrophoretic deposition (EPD) , 2007 .

[30]  Jianfeng Gao,et al.  Dip-coating thin yttria-stabilized zirconia films for solid oxide fuel cell applications , 2004 .

[31]  A. Rousset,et al.  Dense yttria stabilized zirconia: sintering and microstructure , 2003 .

[32]  Z. Yufeng,et al.  Effect of dispersants on surface chemical properties of nano-zirconia suspensions , 2000 .

[33]  R. Greenwood,et al.  Acoustophoretic studies of aqueous suspensions of alumina and 8 mol% yttria stabilised zirconia powders , 2000 .