Recycling high-purity silicon from diamond-wire saw kerf slurry waste by vacuum refining process

[1]  P. Xing,et al.  Recycling silicon from silicon cutting waste by Al–Si alloying , 2020 .

[2]  P. Xing,et al.  Recycling of silicon kerf loss derived from diamond-wire saw cutting process to prepare silicon nitride , 2020 .

[3]  Wenhui Ma,et al.  Thermodynamic analysis and experimental verification for silicon recovery from the diamond wire saw silicon powder by vacuum carbothermal reduction , 2019, Separation and Purification Technology.

[4]  Yi Tan,et al.  Remanufacturing of silicon powder waste cut by a diamond-wire saw through high temperature non-transfer arc assisted vacuum smelting. , 2019, Journal of hazardous materials.

[5]  P. Xing,et al.  Study on the kinetics of iron removal from silicon diamond-wire saw cutting waste: Comparison between heterogeneous and homogeneous reaction methods , 2019, Separation and Purification Technology.

[6]  S. Thomas,et al.  A metallurgical route to upgrade silicon kerf derived from diamond-wire slicing process , 2019, Vacuum.

[7]  C. Lan,et al.  Recycling and reuse of kerf-loss silicon from diamond wire sawing for photovoltaic industry. , 2019, Waste management.

[8]  Maw-Tien Lee,et al.  Recovery of cutting fluids and silicon carbide from slurry waste. , 2019, Journal of hazardous materials.

[9]  Wenhui Ma,et al.  Kinetic mechanism of aluminum removal from diamond wire saw powder in HCl solution. , 2019, Journal of hazardous materials.

[10]  P. Xing,et al.  An Economical Approach for the Recycling of High-Purity Silicon from Diamond-Wire Saw Kerf Slurry Waste , 2019, Silicon.

[11]  S. Thomas,et al.  Clean enhancing elimination of boron from silicon kerf using Na2O-SiO2 slag treatment , 2018, Journal of Cleaner Production.

[12]  S. Yen,et al.  Silicon-Based Composite Negative Electrode Prepared from Recycled Silicon-Slicing Slurries and Lignin/Lignocellulose for Li-Ion Cells , 2018 .

[13]  Yanjun Li,et al.  Fabrication of Si2N2O ceramic with silicon kerf waste as raw material , 2017 .

[14]  F. Kießling,et al.  Different nucleation approaches for production of high-performance multi-crystalline silicon ingots and solar cells , 2017 .

[15]  A. Benayad,et al.  Surface chemical-bonds analysis of silicon particles from diamond-wire cutting of crystalline silicon , 2016 .

[16]  J. Duh,et al.  Processing silicon microparticles recycled from wafer waste via Rapid Thermal Process for lithium-ion battery anode materials , 2016 .

[17]  M. Vardelle,et al.  Use of a thermal plasma process to recycle silicon kerf loss to solar-grade silicon feedstock , 2016 .

[18]  Xiaodong Su,et al.  Next-generation multi-crystalline silicon solar cells: Diamond-wire sawing, nano-texture and high efficiency , 2015 .

[19]  H. Hsu,et al.  A rapid thermal process for silicon recycle and refining from cutting kerf-loss slurry waste , 2015 .

[20]  P. Biswas,et al.  Elimination of Carbon Contamination from Silicon Kerf Using a Furnace Aerosol Reactor Methodology , 2015 .

[21]  Hikaru Kobayashi,et al.  Fabrication of Si nanoparticles from Si swarf and application to solar cells , 2014 .

[22]  M. Yoshimoto,et al.  Recycling of kerf loss silicon derived from diamond-wire saw cutting process by chemical approach , 2013 .

[23]  S. Shi,et al.  Study on the removal process of phosphorus from silicon by electron beam melting , 2013 .

[24]  I. Mártil,et al.  Rapid thermal annealing effects on the structural properties and density of defects in SiO2 and SiNx:H films deposited by electron cyclotron resonance , 2000 .