A Case of Intraocular Proliferative Changes Caused by a Glaucoma Tube Device

In recent years, glaucoma tube surgery has been recommended for refractory cases that have failed to respond to angle surgery. In this study, we described the case of the fibrous proliferative membrane caused in the anterior chamber after Ahmed glaucoma valve implantation in a pediatric glaucoma patient. He was born full term, weighing 3228 g. Corneal opacity in both eyes was seen at birth and he was referred to the Department of Ophthalmology, Hiroshima University Hospital on the 13th day of his life. At the initial examination, the intraocular pressure was 37mmHg right 25mmHg left. Corneal diameter expansion and diffuse corneal opacity were seen in both eyes. Nine days after the initial examination, trabeculotomy was performed in both eyes but they were ineffective, and Ahmed glaucoma tubes were inserted in both eyes two months later. Four months later the intraocular pressure remained 30mmHg range in both eyes and micropulse cyclophotocoagulation was performed. One year after the Ahmed glaucoma valve implantation, the tube of right eye was exposed, and we planned to perform a repair procedure. At this time, ultrasound biomicroscopy (UBM) showed proliferative tissue around both tubes. They were removed next month. Although silicone is a highly biocompatible material, it can cause foreign body reactions such as encapsulation around the silicone plate and proliferative membranes around silicone oil. We speculated that a similar reaction occurred to the silicone tube in this case. We reported a case of fibrous proliferative membrane in the anterior chamber. This might be caused by the silicon tube of the Ahmed glaucoma valve.