Magnetic losses for non-sinusoidal waveforms found in AC motors

Both high-power and low-power ac motors are in common use in a wide range of applications. However, it is currently very difficult to predict the efficiency of ac motors because the magnetic losses are difficult to calculate under the non-sinusoidal voltage waveforms that are applied to the ac motors by the inverters. The manufacturers of the magnetic materials usually supply loss data for sinusoidal waveforms only. As a result, a power de-rating factor has to be applied to the design in order to avoid thermal problems. In this letter, a model is provided for calculating magnetic losses under non-sinusoidal voltage waveforms. It is shown that the magnetic losses for non-sinusoidal voltage waveforms can far exceed the magnetic losses for sinusoidal voltage waveforms if either the eddy current loss or excess eddy current loss dominates the total magnetic loss, even when the peak flux density and the frequency are kept the same for both waveforms. The model is applied to experimental data on two different materials and to two common voltage inverter waveforms. Very good agreement with experimental data is found.

[1]  W.A. Roshen,et al.  A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms , 2005, IEEE Transactions on Power Electronics.

[2]  W. Roshen.  Ferrite core loss for power magnetic components design , 1991 .

[3]  A. Van den Bossche,et al.  Measurement and loss model of ferrites with non-sinusoidal waveforms , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[4]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[5]  Yo Sakaki,et al.  Hysteresis losses in Mn-Zn ferrite cores , 1986 .

[6]  R. H. Pry,et al.  Calculation of the Energy Loss in Magnetic Sheet Materials Using a Domain Model , 1958 .

[7]  G. Bertotti,et al.  Space‐time correlation properties of the magnetization process and eddy current losses: Applications. II. Large wall spacing , 1984 .

[8]  Francesco Profumo,et al.  Iron losses in magnetic materials with six-step and PWM inverter supply (induction motors) , 1991 .

[9]  G. Bertotti.  General properties of power losses in soft ferromagnetic materials , 1988 .

[10]  C.R. Sullivan,et al.  Improved calculation of core loss with nonsinusoidal waveforms , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[11]  G. Bertotti,et al.  Some considerations on the physical interpretation of eddy current losses in ferromagnetic materials , 1986 .

[12]  W. Shockley,et al.  Studies of the Propagation Velocity of a Ferromagnetic Domain Boundary , 1950 .