The standard enthalpies of formation of the compounds of early transition metals with late transition metals and with noble metals as determined by Kleppa and co-workers at the University of Chicago : A review

Abstract Since the early 1980s, experimental studies of the standard enthalpies of formation of the binary intermetallic compounds of early transition metals with late transition metals and with noble metals have been a major long-term research project in this laboratory. Tabulated in this review are 290 enthalpy of formation values for 273 such compounds, all determined in this laboratory during the last two decades. The calorimetric methods used in these investigations have included solution calorimetry, solute–solvent drop calorimetry, and direct synthesis calorimetry. Among these methods, the direct synthesis approach has been the most frequently used technique. In this review, our results will be compared with values published by other laboratories and with values predicted by the Miedema semi-empirical model. However, the emphasis will be placed on the systematic variation from group to group in the periodic table. A few examples will be presented to show the correlation between the enthalpy of formation and the pertinent atomic number in the binary alloy families.

[1]  F. R. de Boer,et al.  Model predictions for the enthalpy of formation of transition metal alloys II , 1977 .

[2]  O. J. Kleppa,et al.  Thermochemistry of alloys of transition metals: Part III. Copper-Silver, -Titanium, Zirconium, and -Hafnium at 1373 K , 1982 .

[3]  O. J. Kleppa,et al.  Standard enthalpies of formation of lanthanum alloys, La + Me (MeRu, Rh, Pd, Os, Ir, Pt), by high-temperature calorimetry , 1993 .

[4]  A. Pasturel,et al.  Thermodynamic study of the valence state of cerium and hydrogen storage in Ce(Ni1−xCux)5 compounds , 1985 .

[5]  J. Gachon,et al.  Comparison between measured and predicted enthalpies of formation , 1992 .

[6]  A. Pasturel,et al.  Study of the enthalpies of formation in the Gd-(Fe, Co, Pd, Pt) systems , 1987, Metallurgical and Materials Transactions A.

[7]  O. J. Kleppa,et al.  Standard enthalpies of formation for some samarium alloys, Sm + Me (Me = Ni, Rh, Pd, Pt), determined by high-temperature direct synthesis calorimetry , 1998 .

[8]  O. J. Kleppa,et al.  Standard Enthalpies of Formation of Some Erbium Alloys, Er + Me (M = Ni, Ru, Rh, Pd, Ir, Pt), by High Temperature Direct Synthesis Calorimetry , 1996 .

[9]  O. J. Kleppa,et al.  Standard molar enthalpies of formation of Irme (me = Ti, Zr, or Hf) and of OsTi by high-temperature mixing calorimetry , 1988 .

[10]  A. Pasturel,et al.  Study of the enthalpies of formation and crystallization in the system Zr‐Ni , 1984 .

[11]  A. K. Niessen,et al.  The enthalpy of solution for solid binary alloys of two 4d-transition metals , 1983 .

[12]  O. J. Kleppa,et al.  Standard enthalpies of formation of some thulium alloys, Tm+Me (Me = Ni, Rh, Pd, Pt), by high temperature direct synthesis calorimetry , 1997 .

[13]  A. Pasturel,et al.  Study of the enthalpies of formation in the Gd-Ni system , 1986 .

[14]  O. J. Kleppa,et al.  Standard enthalpies of formation of some holmium alloys, Ho + Me (Me = Ni, Ru, Rh, Pd, Ir, Pt), determined by high temperature direct synthesis calorimetry , 1996 .

[15]  O. J. Kleppa,et al.  Thermochemistry of binary and , 1993, Metallurgical and Materials Transactions. A.

[16]  O. J. Kleppa,et al.  Standard enthalpies of formation of scandium alloys, Sc+Me (MeFe, Co, Ni, Ru, Rh, Pd, Ir, Pt), by high-temperature calorimetry , 1993 .

[17]  Leo Brewer,et al.  A most striking confirmation of the Engel metallic correlation , 1967 .

[18]  O. J. Kleppa,et al.  Thermochemistry of binary alloys of transition metals: The Me-Sc, Me-Y, and Me-La (Me = Ag,Au) systems , 1991 .

[19]  K. Gschneidner On the interrelationships of the physical properties of lanthanide compounds: The melting point, heat of formation and lattice parameter(s)☆ , 1969 .

[20]  O. J. Kleppa,et al.  Enthalpies of formation of Me3U (Me = Ru, Rh, Pd) by high-temperature reaction calorimetry , 1991 .

[21]  O. J. Kleppa,et al.  Thermochemistry of binary alloys of transition metals: The systems Cu-Ce, Me-Pr, and Me-Nd (Me = Cu, Ag, Au) , 1994 .

[22]  O. J. Kleppa,et al.  Redetermination of the standard enthalpies of formation of LaPt, LuPt and LuPt3 by high temperature direct synthesis calorimetry , 1995 .

[23]  O. J. Kleppa,et al.  Standard enthalpies of formation of yttrium alloys, Y-Me (Me = Ru, Rh, Pd, Os, Ir, Pt), by high-temperature calorimetry , 1993 .

[24]  C. Colinet,et al.  Molar enthalpies of formation of LnAl2 compounds , 1985 .

[25]  O. J. Kleppa,et al.  Note on the thermochemistry of the Au+V, Au+Nb, and Au+Ta systems , 1992 .

[26]  A. Pasturel,et al.  A Theoretical and Experimental Study of the Enthalpies of Formation of LaNi5-Type Compounds , 1984, September 1.

[27]  O. J. Kleppa,et al.  Standard enthalpies of formation of some praseodymium alloys by high-temperature direct synthesis calorimetry , 1994 .

[28]  O. J. Kleppa,et al.  Enthalpies of formation of equiatomic compounds of titanium, zirconium and hafnium with late transition metals: Systematic aspects and comparisons with predicted values , 1989 .

[29]  O. J. Kleppa,et al.  Standard enthalpies of formation of some alloys formed between Group IV elements and Group VIII elements, determined by high-temperature direct synthesis calorimetry , 1998 .

[30]  L. Brewer,et al.  Bonding and structures of transition metals. , 1968, Science.

[31]  O. J. Kleppa,et al.  Standard enthalpies of formation of RhTi, RhZr and RhHf , 1987 .

[32]  O. J. Kleppa,et al.  Standard enthalpies of formation of neodymium alloys, Nd + Me (Me ≡ Ni, Ru, Rh, Pd, Ir, Pt), by high-temperature direct synthesis calorimetry , 1995 .

[33]  O. J. Kleppa,et al.  Note on the standard enthalpies of formation of LuNiS, Lu3Pd4 and LuPd, determined by high temperature direct synthesis calorimetry , 1997 .

[34]  Philip Holmes,et al.  The limited effectiveness of normal forms: a critical review and extension of local bifurcation studies of the Brusselator PDE , 1997 .

[35]  J. Gachon,et al.  Different ways to find the thermodynamic functions describing the formation of binary alloys: part 1 comparison between models and experimental data☆ , 1985 .

[36]  O. J. Kleppa,et al.  Standard enthalpies of formation of gadolinium alloys, Gd + Me (Me ≡ Ni, Ru, Rh, Pd, Ir, Pt), by high-temperature direct synthesis calorimetry , 1995 .

[37]  O. J. Kleppa,et al.  Standard enthalpies of formation of PdZr and PdHf , 1987 .

[38]  Pierre Villars,et al.  Pearson's handbook of crystallographic data for intermetallic phases , 1985 .

[39]  O. J. Kleppa,et al.  Standard molar enthalpy of formation of LaB6 by high-temperature calorimetry , 1984 .

[40]  H. Capel,et al.  Time- and frequency-dependent correlation functions for the homogeneous and alternating-isotropic XY-models , 1980 .

[41]  O. J. Kleppa,et al.  A thermochemical study of liquid and solid alloys “(1−x)La + xNi’ at 1376 K , 1983 .

[42]  O. J. Kleppa,et al.  Standard enthalpies of formation of Ni3Ta, Pd3Ta, Pt3Nb, Pt2V and Pt3V by high-temperature direct synthesis calorimetry , 1994 .

[43]  O. J. Kleppa,et al.  Thermochemistry of liquid alloys of transition metals II. (Copper + titanium) at 1372 K , 1981 .

[44]  O. Kubaschewski The heats of formation in the system aluminium + nickel + titanium , 1958 .

[45]  O. J. Kleppa,et al.  Thermochemistry of the intermetallic compounds RuTi, RuZr, and RuHf , 1988 .

[46]  F. Sommer,et al.  Determination of the enthalpies of formation of intermetallic compounds of cobalt and nickel with dysprosium, erbium and gadolinium , 1986 .

[47]  P. O'hare,et al.  The standard enthalpy of formation of LaNi5 The enthalpies of hydriding of LaNi5−xAlx , 1983 .

[48]  G. Wijbenga The enthalpy of formation of UPd3 by fluorine bomb calorimetry , 1982 .

[49]  A. Palenzona,et al.  Thermodynamic and crystallographic properties of REPd intermetallic compounds , 1978 .

[50]  O. J. Kleppa,et al.  Standard enthalpies of formation of CeNi5 and of RENi (RE=Ce, Pr, Nd, Sm, Gd, Tb, Ho, Tm and Lu), determined by high-temperature direct synthesis calorimetry , 1998 .

[51]  O. J. Kleppa,et al.  Thermochemistry of alloys of transition metals: Part IV. Alloys of copper with scandium, yttrium, lanthanum, and lutetium , 1984 .

[52]  O. J. Kleppa,et al.  Standard enthalpies of formation of Ptti, Ptzr, and Pthf , 1988 .