Geometric process repair model for an unreliable production system with an intermediate buffer

In this paper, we consider an unreliable production system consisting of two machines (M1 and M2) in which M1 produces a single product type to satisfy a constant and continuous demand of M2 and it is subjected to random failures. In order to palliate perturbations caused by failures, a buffer stock is built up to satisfy the demand during the production unavailability of M1. A traditional assumption made in the previous research is that repairs can restore the failed machines to as good as new state. To develop a more realistic mathematical model of the system, we relax this assumption by assuming that the working times of M1 after repairs are geometrically decreasing, which means M1 cannot be repaired as good as new. Undergoing a specified number of repairs, M1 will be replaced by an identical new one. A bivariate policy ( S , N ) is considered, where S is the buffer stock level and N is the number of failures at which M1 is replaced. We derive the long-run average cost rate C ( S , N ) used as the basis for optimal determination of the bivariate policy. The optimal policies S * and N * are derived, respectively. Then, an algorithm is presented to find the optimal joint policy ( S , N ) * . Finally, an illustrative example is given to validate the proposed model. Sensitivity analyses are also carried out to illustrate the effectiveness and robustness of the proposed methodology.

[1]  Zehui Li,et al.  An extended extreme shock maintenance model for a deteriorating system , 2008, Reliab. Eng. Syst. Saf..

[2]  Y. Zhang.  A bivariate optimal replacement policy for a repairable system , 1994 .

[3]  Xiaolan Xie,et al.  Optimal joint preventive maintenance and production policies , 2005 .

[4]  Yeh Lam,et al.  A geometric process equivalent model for a multistate degenerative system , 2002, Eur. J. Oper. Res..

[5]  E. G. Kyriakidis,et al.  Markov decision models for the optimal maintenance of a production unit with an upstream buffer , 2009, Comput. Oper. Res..

[6]  Maxim Finkelstein.  A note on converging geometric-type processes , 2010, Journal of Applied Probability.

[7]  Ali Gharbi,et al.  Joint optimal production control/preventive maintenance policy for imperfect process manufacturing cell , 2012 .

[8]  Nidhal Rezg,et al.  Integrated model of preventive maintenance, quality control and buffer sizing for unreliable and imperfect production systems , 2009 .

[9]  Anis Chelbi,et al.  Analysis of a production/inventory system with randomly failing production unit submitted to regular preventive maintenance , 2004, Eur. J. Oper. Res..

[10]  Ling Li,et al.  An optimal replacement policy for a degenerative system with two-types of failure states , 2014, J. Comput. Appl. Math..

[11]  Lin Ye.  Geometric processes and replacement problem , 1988 .

[12]  Yuan Lin Zhang,et al.  Geometric process model for a system with inspections and preventive repair , 2014, Comput. Ind. Eng..

[13]  Christophe Bérenguer,et al.  Optimal Buffer Inventory and Opportunistic Preventive Maintenance Under Random Production Capacity Availability , 2008 .

[14]  F. A. van der Duyn Schouten,et al.  Maintenance optimization of a production system with buffer capacity , 1995 .

[15]  Yuan Lin Zhang,et al.  An extended replacement policy for a deteriorating system with multi-failure modes , 2011, Appl. Math. Comput..

[16]  Yiqiang Q. Zhao,et al.  Properties of the geometric and related processes , 2005 .

[17]  Wenqing Wu,et al.  Optimal order-replacement policy for a phase-type geometric process model with extreme shocks , 2014 .

[18]  Phillipp Kaestner,et al.  Hierarchical Decision Making In Stochastic Manufacturing Systems , 2016 .

[19]  John Andrews,et al.  Maintenance modelling for computer-based systems , 2001 .

[20]  Shaomin Wu,et al.  Optimizing replacement policy for a cold-standby system with waiting repair times , 2009, Appl. Math. Comput..

[21]  Anis Gharbi,et al.  Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale , 2007, Eur. J. Oper. Res..

[22]  Yen-Luan Chen,et al.  A bivariate optimal imperfect preventive maintenance policy for a used system with two-type shocks , 2012, Comput. Ind. Eng..

[23]  Zhisheng Zhang,et al.  Intermediate buffer analysis for a production system , 2013 .

[24]  E. G. Kyriakidis,et al.  A semi-Markov decision algorithm for the maintenance of a production system with buffer capacity and continuous repair times , 2008 .

[25]  Ali Gharbi,et al.  Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems , 2007 .

[26]  Izak Duenyas,et al.  Integrated maintenance and production control of a deteriorating production system , 2002 .

[27]  Yeh Lam,et al.  Modelling SARS data using threshold geometric process , 2006, Statistics in medicine.

[28]  Nidhal Rezg,et al.  Analysis of a production/inventory system with randomly failing production unit subjected to a minimum required availability level , 2006 .

[29]  Kartikeya S. Puranam,et al.  A note on the optimal replacement problem , 2006 .

[30]  Inmaculada Torres Castro,et al.  Reward optimization of a repairable system , 2006, Reliab. Eng. Syst. Saf..

[31]  E. G. Kyriakidis,et al.  Optimal maintenance of a production-inventory system with idle periods , 2009, Eur. J. Oper. Res..

[32]  E. G. Kyriakidis,et al.  Optimal Maintenance of a Production System with L Intermediate Buffers , 2012 .

[33]  M-Y You,et al.  Residual life prediction of repairable systems subject to imperfect preventive maintenance using extended proportional hazards model , 2012 .

[34]  Wei Li,et al.  Some Theoretical Properties of the Geometric and α-Series Processes , 2008 .

[35]  Jinfei Shi,et al.  Maintenance optimization for a production system with intermediate buffer and replacement part order considered , 2014 .

[36]  Yuan Lin Zhang,et al.  An optimal replacement policy for a two-component series system assuming geometric process repair , 2007, Comput. Math. Appl..