Multi-input single-output filter with reduced number of passive elements employing single current conveyor

Abstract A new biquadratic universal filter configuration realising second-order low-pass, band-pass, and high-pass functions employing single current conveyor is proposed. Using this configuration high-pass, low-pass and band-pass filters can be realized with little modifications. The circuit employs a second-generation current conveyor (CCII+), and only four passive components. Since the current conveyor is a high performance active element, the circuit proposed is suitable for wide band applications. The derived filters can be easily cascaded and use reduced number of passive components compared to previously reported counterparts. To illustrate the design possibilities provided by the introduced circuit current mode multifunction filters are constructed and tested.

[1]  Jiin-Long Lee,et al.  Insensitive current/voltage-mode filters using FTFNs , 1996 .

[2]  Ece Olcay Gunes,et al.  Realisation of current-mode universal filter using CFCCIIps , 1996 .

[3]  A. Fabre,et al.  Universal current mode biquad implemented from two second generation current conveyors , 1995 .

[4]  Raj Senani,et al.  New current-mode biquad filter , 1992 .

[5]  Oguzhan Cicekoglu,et al.  High output impedance current-mode multifunction filter with minimum number of active and reduced number of passive elements , 1998 .

[6]  Masami Higashimura.  Current-mode lowpass, bandpass and highpass filters using an FTFN , 1993 .

[7]  Chun-Ming Chang.  Current-mode lowpass, bandpass and highpass biquads using two CCIIs , 1993 .

[8]  Muhammad Taher Abuelma'atti.  Cascadable current-mode filters using single FTFN , 1996 .

[9]  Muhammad Taher Abuelma'atti,et al.  A novel current-conveyor-based universal current-mode filter , 1996 .

[10]  Ali Toker,et al.  Current-mode continuous-time fully-integrated universal filter using CDBAs , 1999 .

[11]  Muhammad Taher Abuelma'atti,et al.  Current-mode universal filters using unity-gain cells , 1996 .

[12]  Raj Senani,et al.  A Simple Approach of Deriving Single-Input-Multiple-Output Current- Mode Biquad Filters , 1996 .

[13]  Serdar Ozoguz,et al.  Universal current-mode filter with reduced number of active and passive components , 1997 .

[14]  Chun-Ming Chang.  Novel universal current-mode filter with single input and three outputs using only five current conveyors , 1993 .