Large‐scale discrete element modeling in a fluidized bed

The discrete element method (DEM) is widely used in calculating powder systems. The DEM makes it possible to determine the complicated phenomena related to particle flowability. However, DEM has a fatal problem, which is that the number of calculated particles is restricted due to excessive calculation costs. Consequently, we have developed a large-scale model of the DEM, which is called the coarse grain model. The coarse grain particle represents a group of the original particles. Therefore, a large-scale DEM simulation can be performed using an extremely small number of the calculated particles. In our previous studies, the coarse grain model was applied in gas–solid and solid–liquid flow systems. It is anticipated that the coarse grain model will be used in various powder systems. In the current study, the coarse grain model has been applied to a two-dimensional bubbling fluidized bed. The adequacy of the coarse grain model was proved by a comparison with the original particle behavior. The simulation results obtained using the coarse grain model showed good agreement with the results for the original system. Moreover, the calculation speed with the coarse grain model was shown to be much faster than the calculation speed of the original model. Copyright © 2010 John Wiley & Sons, Ltd.

[1]  H.E.A. van den Akker,et al.  Analysis of a bubbling 2-D gas-fluidized bed using image processing , 1994 .

[2]  R. D. Felice,et al.  The voidage function for fluid-particle interaction systems , 1994 .

[3]  Reghan J. Hill,et al.  INERTIAL EFFECTS IN SUSPENSION AND POROUS-MEDIA FLOWS , 2001 .

[4]  J. Kuipers,et al.  Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: A hard-sphere approach. , 1996 .

[5]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[6]  Seiichi Koshizuka,et al.  Numerical Simulation of Solid-Liquid Flows Involving Free Surface by DEM-MPS Method , 2008 .

[7]  Seiichi Koshizuka,et al.  Development of a Coarse Grain Simulation Methodology for Discrete Element Method in Gas-Solid Flows , 2008 .

[8]  Kurt Liffman,et al.  Use of discrete element method simulation in studying fluidization characteristics: influence of interparticle force , 2001 .

[9]  Masayuki Horio,et al.  DEM simulation of fluidized beds for gas-phase olefin polymerization , 1999 .

[10]  Leon R. Glicksman,et al.  Bubble properties in large-particle fluidized beds , 1987 .

[11]  Benjamin J. Glasser,et al.  Discrete element simulation of free flowing grains in a four‐bladed mixer , 2009 .

[12]  Chih-Hung Hsu,et al.  Similarity Model for DEM Simulation of Fluidized Bed , 2007 .

[13]  Jam Hans Kuipers,et al.  A numerical study of fluidization behavior of Geldart A particles using a discrete particle model , 2004 .

[14]  S. Ergun.  Fluid flow through packed columns , 1952 .

[15]  Brahmeshwar Mishra,et al.  A review of computer simulation of tumbling mills by the discrete element method: Part I—contact mechanics , 2003 .

[16]  Seiichi Koshizuka,et al.  Large-scale discrete element modeling in pneumatic conveying , 2009 .

[17]  D. Geldart.  Types of gas fluidization , 1973 .

[18]  Masayuki Horio,et al.  Particle and bubble movements around tubes immersed in fluidized beds : a numerical study , 1999 .

[19]  Yoshitsugu Muguruma,et al.  Numerical simulation of particulate flow with liquid bridge between / particles simulation of centrifugal tumbling granulator , 2000 .

[20]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[21]  Pradeep K. Agarwal,et al.  Measurement and modelling of bubble parameters in a two-dimensional gas-fluidized bed using image analysis , 1990 .

[22]  Paul W. Cleary,et al.  DEM prediction of particle flows in grinding processes , 2008 .

[23]  S. Takeuchi,et al.  Discrete element method simulation of three-dimensional conical-base spouted beds , 2008 .

[24]  Aibing Yu,et al.  Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics , 1997 .

[25]  Yuuki Johno,et al.  Numerical simulation of air and particle motions in bubbling fluidized bed of small particles , 2000 .

[26]  Jai Kant Pandit,et al.  Study of Geldart's Group A behaviour using the discrete element method simulation , 2005 .

[27]  Shintaro Takeuchi,et al.  Discrete element simulation of a flat-bottomed spouted bed in the 3-D cylindrical coordinate system , 2004 .

[28]  Keizo Yabumoto,et al.  Spontaneous structures in three-dimensional bubbling gas-fluidized bed by parallel DEM–CFD coupling simulation , 2008 .

[29]  Seiichi Koshizuka,et al.  Effect of Nuclear Fuel Particle Movement on Nuclear Criticality in a Rotating Cylindrical Vessel , 2005 .

[30]  Yutaka Tsuji,et al.  Discrete particle simulation of a rotary vessel mixer with baffles , 1997 .