Ultrasonic wave-based structural health monitoring embedded instrument.

Piezoelectric sensors and actuators are the bridge between electronic and mechanical systems in structures. This type of sensor is a key element in the integrity monitoring of aeronautic structures, bridges, pressure vessels, wind turbine blades, and gas pipelines. In this paper, an all-in-one system for Structural Health Monitoring (SHM) based on ultrasonic waves is presented, called Phased Array Monitoring for Enhanced Life Assessment. This integrated instrument is able to generate excitation signals that are sent through piezoelectric actuators, acquire the received signals in the piezoelectric sensors, and carry out signal processing to check the health of structures. To accomplish this task, the instrument uses a piezoelectric phased-array transducer that performs the actuation and sensing of the signals. The flexibility and strength of the instrument allow the user to develop and implement a substantial part of the SHM technique using Lamb waves. The entire system is controlled using configuration software and has been validated through functional, electrical loading, mechanical loading, and thermal loading resistance tests.

[1]  Tadeusz Stepinski,et al.  Direction of arrival estimation of Lamb waves using circular arrays , 2011 .

[2]  J. Achenbach,et al.  Self-Focusing of Rayleigh Waves and Lamb Waves with a Linear Phased Array , 1997 .

[3]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[4]  J. V. Filho,et al.  Sizing PZT Transducers in Impedance-Based Structural Health Monitoring , 2011, IEEE Sensors Journal.

[5]  Petr Bilik,et al.  CompactRIO embedded system in Power Quality Analysis , 2008, 2008 International Multiconference on Computer Science and Information Technology.

[6]  Y.G. Liu,et al.  Effect of piezoelectric constants on mechanical properties of PFC , 2010, 2010 2nd International Conference on Computer Engineering and Technology.

[7]  Gerardo Aranguren,et al.  Structural health monitoring network system with wireless communications inside closed aerospace structures , 2012 .

[8]  Hoon Sohn,et al.  Piezoelectric transducer self-diagnosis under changing environmental and structural conditions , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  Z. Sharif-Khodaei,et al.  SMART Platform for Structural Health Monitoring of Sensorised Stiffened Composite Panels , 2012 .

[10]  L. Staudigel,et al.  Test of a fiber Bragg grating sensor network for commercial aircraft structures , 2002, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002(Cat. No.02EX533).

[11]  Victor Giurgiutiu,et al.  Recent advancements in the electromechanical (E/M) impedance method for structural health monitoring and NDE , 1998, Smart Structures.

[12]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[13]  E. Kriezis,et al.  Eddy currents: theory and applications , 1992, Proc. IEEE.

[14]  Nezih Mrad.  SHM implementation , 2011, 2011 4th Annual Caneus Fly by Wireless Workshop.

[15]  Ratnam Ch,et al.  Damage Identification in Composite Materials Using Lamb Wave Method , 2011 .

[16]  Christian Boller,et al.  Health Monitoring of Aerospace Structures , 2003 .

[17]  Alexi S. Rakow,et al.  A fiber Bragg grating interrogation system for health monitoring of metals and composites , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  Reza Zoughi,et al.  Surface crack evaluation , 2000 .

[19]  M. Fink,et al.  Time reversal processing in ultrasonic nondestructive testing , 1995, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[20]  Michael J. Dupuy,et al.  Airline fleet maintenance: Trade-off analysis of alternate aircraft maintenance approaches , 2011, 2011 IEEE Systems and Information Engineering Design Symposium.