Composition optimization of arc ion plated CrNx films on 316L stainless steel as bipolar plates for polymer electrolyte membrane fuel cells

[1]  Z. Shao,et al.  Honeycomb-like nanocomposite Ti-Ag-N films prepared by pulsed bias arc ion plating on titanium as bipolar plates for unitized regenerative fuel cells , 2012 .

[2]  JunHo Kim,et al.  Nitride films as protective layers for metallic bipolar plates of polymer electrolyte membrane fuel cell stacks , 2011 .

[3]  B. Yi,et al.  Arc ion plated Cr/CrN/Cr multilayers on 316L stainless steel as bipolar plates for polymer electroly , 2011 .

[4]  Shuo-Jen Lee,et al.  Surface modification and performance of inexpensive Fe-based bipolar plates for proton exchange membrane fuel cells , 2010 .

[5]  John A. Turner,et al.  Reviewing Metallic PEMFC Bipolar Plates , 2010 .

[6]  L. Wang,et al.  Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments , 2010 .

[7]  Lu Guo,et al.  Corrosion behavior of TiN-coated stainless steel as bipolar plate for proton exchange membrane fuel cell , 2010 .

[8]  J. J. Lee,et al.  Titanium oxynitride films for a bipolar plate of polymer electrolyte membrane fuel cell prepared by inductively coupled plasma assisted reactive sputtering , 2009 .

[9]  Jung Joong Lee,et al.  Inductively coupled plasma nitriding of chromium electroplated AISI 316L stainless steel for PEMFC bipolar plate , 2009 .

[10]  Ho Jang,et al.  Improved corrosion resistance and interfacial contact resistance of 316L stainless-steel for proton exchange membrane fuel cell bipolar plates by chromizing surface treatment , 2009 .

[11]  Jing Liu,et al.  Plasma nitrided titanium as a bipolar plate for proton exchange membrane fuel cell , 2009 .

[12]  F. Zaza,et al.  Bipolar plate materials for PEMFCs: A conductivity and stability study , 2008 .

[13]  B. Yi,et al.  Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating , 2008 .

[14]  Tse-Hao Ko,et al.  Carbon film-coated 304 stainless steel as PEMFC bipolar plate , 2008 .

[15]  Bing Yang,et al.  Growth of Cr-Nitrides on commercial Ni–Cr and Fe–Cr base alloys to protect PEMFC bipolar plates , 2007 .

[16]  Yan Wang,et al.  An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells , 2007 .

[17]  Ramana G. Reddy,et al.  Materials and design development for bipolar/end plates in fuel cells , 2004 .

[18]  Heli Wang,et al.  Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells , 2003 .

[19]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[20]  P. Adcock,et al.  Stainless steel as a bipolar plate material for solid polymer fuel cells , 2000 .

[21]  W. Meng,et al.  Inductively coupled plasma assisted physical vapor deposition of titanium nitride coatings , 1997 .

[22]  A R Plummer.  Introduction to Solid State Physics , 1967 .

[23]  B. Yi,et al.  Optimized Cr-nitride film on 316L stainless steel as proton exchange membrane fuel cell bipolar plate , 2009 .

[24]  D. Mahajan,et al.  Metal bipolar plates for PEM fuel cell—A review , 2007 .

[25]  G. V. Chester,et al.  Solid State Physics , 2000 .

[26]  P. Chiotti,et al.  Uranium-zinc system , 1957 .