Crack growth path prediction for the angled cracked plate using higher order terms of Williams series expansion

A B S T R A C T The amount of damage induced by brittle fracture of cracked bodies depends considerably on the path of fractures. Therefore, prediction of the trajectory of fracture using suitable theoretical fracture criteria is very important for cracked structures. In this paper, using higher-order terms of Williams's series expansion and the maximum tangential stress criterion, the mixed mode I/II crack growth path of an angled crack plate subjected to biaxial far field loading is investigated theoretically. To evaluate the accuracy of the theoretical results, they are compared with the experimentally reported trajectories for the angled crack plate specimen. It is shown that by taking into account the higher order terms of the Williams series expansion a very good agreement is observed between the experimental and theoretical mixed mode fracture paths in the angled crack problem. It was also observed that the theoretically determined initial angle of crack growth is consistent with the experimental results. }}

[1]  J. G. Williams,et al.  Fracture under complex stress — The angled crack problem , 1984 .

[2]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[3]  F. J. Gómez,et al.  Fracture of U-notched specimens under mixed mode: Experimental results and numerical predictions , 2009 .

[4]  K. Murthy,et al.  A finite element based interior collocation method for the computation of stress intensity factors and T-stresses , 2010 .

[5]  M. Ayatollahi,et al.  Analysis of a new specimen for mixed mode fracture tests on brittle materials , 2009 .

[6]  Yoichi Sumi,et al.  Computational crack path prediction , 1985 .

[7]  Glaucio H. Paulino,et al.  T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: a unified approach using the interaction integral method , 2003 .

[8]  Luigi Gambarotta,et al.  Some observations on the path stability in fracture propagation for biaxially stressed plates , 1980 .

[9]  M. Ayatollahi,et al.  Brittle fracture evaluation of a fine grain cement mortar in combined tensile-shear deformation , 2009 .

[10]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[11]  Henning Schütte,et al.  On the full set of elastic T-stress terms of internal circular cracks under mixed-mode loading conditions , 2007 .

[12]  Hussain,et al.  Strain Energy Release Rate for a Crack Under Combined Mode I and Mode II , 1974 .

[13]  M. Ayatollahi,et al.  Application of Cracked Triangular Specimen Subjected to Three-Point Bending for Investigating Fracture Behavior of Rock Materials , 2013, Rock Mechanics and Rock Engineering.

[14]  Majid R. Ayatollahi,et al.  A modified MTS criterion (MMTS) for mixed-mode fracture toughness assessment of brittle materials , 2010 .

[15]  M.R.M. Aliha,et al.  Experimental and Theoretical Study of Fracture Paths in Brittle Cracked Materials Subjected to Pure Mode II Loading , 2011 .

[16]  Yi Huang,et al.  Stress intensity factors and T-stress for an edge interface crack by symplectic expansion , 2013 .

[17]  S. K. Maiti,et al.  A study on the theories of unstable crack extension for the prediction of crack trajectories , 1980 .

[18]  M.R.M. Aliha,et al.  An improved semi-circular bend specimen for investigating mixed mode brittle fracture , 2011 .

[19]  M. Ayatollahi,et al.  Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion , 2012 .

[20]  M. Ayatollahi,et al.  Mixed mode brittle fracture in PMMA—An experimental study using SCB specimens , 2006 .

[21]  S. K. Maiti,et al.  Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field Part I: Slit and elliptical cracks under uniaxial tensile loading , 1983 .

[22]  Theo Fett,et al.  Stress intensity factors and T-stress for internally cracked circular disks under various boundary conditions , 2001 .

[23]  M.R.M. Aliha,et al.  Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading , 2010 .

[24]  G. Sih Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[25]  J. C. Radon,et al.  Fracture trajectories in a biaxially stressed plate , 1976 .

[26]  M.R.M. Aliha,et al.  Cracked asphalt pavement under traffic loading – A 3D finite element analysis , 2011 .

[27]  Pericles S. Theocaris,et al.  Photoelastic determination of complex stress intensity factors for slant cracks under biaxial loading with higher-order term effects , 1983 .