Fully spray-coated ITO-free organic solar cells for low-cost power generation

We report on cost-effective ITO-free organic solar cells (OSCs) fabricated by a spray deposition method. All solution-processable layers of solar cells—a highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) layer and a photoactive layer based on poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 (PCBM)—were spray-coated. PEDOT:PSS anode films with various thicknesses were prepared by controlling the spray deposition time. The transmittance and sheet resistance of PEDOT:PSS anodes were varied from 89.0% to 67.4% and from 358 to 63.3 O/squares, respectively, corresponding to an increase in film thickness. The best device exhibited a high power conversion efficiency of 2.17% under 100 mW cm 2 illumination with air mass (AM) 1. 5 global (G) condition. More importantly, the efficiency of the fully spray-coated OSC with the PEDOT:PSS anode was comparable to that of conventional ITO-based devices, demonstrating the feasibility of fabricating all-spray-deposited OSCs without a conventional spin-coating method and the possibility of replacing the costly vacuum-deposited indium tin oxide (ITO) with highly conductive polymer films fabricated by inexpensive spray deposition techniques.

[1]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[2]  Olle Inganäs,et al.  Electrode Grids for ITO Free Organic Photovoltaic Devices , 2007 .

[3]  Seok‐In Na,et al.  Efficient organic solar cells with polyfluorene derivatives as a cathode interfacial layer , 2009 .

[4]  N. S. Sariciftci,et al.  Substituting the postproduction treatment for bulk-heterojunction solar cells using chemical additives , 2008 .

[5]  Daewoo Ihm,et al.  Self‐Assembly and Crystalline Growth of Poly(3,4‐ethylenedioxythiophene) Nanofilms , 2007 .

[6]  Christoph J. Brabec,et al.  Topographical and morphological aspects of spray coated organic photovoltaics , 2009 .

[7]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[8]  Jan Genoe,et al.  Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells , 2009 .

[9]  Luping Yu,et al.  Development of new semiconducting polymers for high performance solar cells. , 2009, Journal of the American Chemical Society.

[10]  Soo‐Hyoung Lee,et al.  Polymer solar cells based on inkjet-printed PEDOT:PSS layer , 2009 .

[11]  Frederik C. Krebs,et al.  Biodegradable polymer solar cells , 2008 .

[12]  Christoph J. Brabec,et al.  Solution-Processed Organic Solar Cells , 2008 .

[13]  John R. Reynolds,et al.  A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules , 2009 .

[14]  Garry Rumbles,et al.  Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition , 2008 .

[15]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[16]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[17]  Paolo Lugli,et al.  Fully spray coated organic photodiodes. , 2009, Nano letters.

[18]  M. Liberatore,et al.  Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells , 2009 .

[19]  Reuben T. Collins,et al.  Ultrasonic spray deposition for production of organic solar cells , 2009 .

[20]  Giyoong Tae,et al.  Efficient Polymer Solar Cells Fabricated by Simple Brush Painting , 2007 .

[21]  L. Jay Guo,et al.  Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes , 2008 .

[22]  Andreas Gombert,et al.  ITO-free wrap through organic solar cells—A module concept for cost-efficient reel-to-reel production , 2007 .

[23]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[24]  Juhwan Kim,et al.  Efficient Polymer Solar Cells with Surface Relief Gratings Fabricated by Simple Soft Lithography , 2008 .

[25]  Christoph J. Brabec,et al.  Performance Analysis of Printed Bulk Heterojunction Solar Cells , 2006 .

[26]  Kuo-Chuan Ho,et al.  Electrochemical characterization of the solvent-enhanced conductivity of poly(3,4-ethylenedioxythiophene) and its application in polymer solar cells , 2009 .

[27]  Ronn Andriessen,et al.  Printable anodes for flexible organic solar cell modules , 2004 .

[28]  Seok‐In Na,et al.  Efficient and Flexible ITO‐Free Organic Solar Cells Using Highly Conductive Polymer Anodes , 2008 .

[29]  Frederik C. Krebs,et al.  All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps , 2009 .

[30]  Yi-Kai Lin,et al.  Modified buffer layers for polymer photovoltaic devices , 2007 .

[31]  D. Bradley,et al.  Degradation of organic solar cells due to air exposure , 2006 .

[32]  Frederik C. Krebs,et al.  Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide , 2009 .

[33]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[34]  Tae-Wook Kim,et al.  Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells , 2009 .

[35]  Claudia N. Hoth,et al.  High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends , 2007 .

[36]  F. Krebs,et al.  High-conductivity large-area semi-transparent electrodes for polymer photovoltaics by silk screen printing and vapour-phase deposition , 2006 .

[37]  Juhwan Kim,et al.  Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation , 2007 .

[38]  Nasser N Peyghambarian,et al.  Fabrication of bulk heterojunction plastic solar cells by screen printing , 2001 .

[39]  Ole Hagemann,et al.  A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration , 2009 .