Modeling the Flow Behavior and Flow Rate of Medium Viscosity Alginate for Scaffold Fabrication With a Three-Dimensional Bioplotter

[1]  S. Bryant,et al.  Cell encapsulation in biodegradable hydrogels for tissue engineering applications. , 2008, Tissue engineering. Part B, Reviews.

[2]  M Nakamura,et al.  Biomatrices and biomaterials for future developments of bioprinting and biofabrication , 2010, Biofabrication.

[3]  S. Razavi,et al.  Modeling Time-Independent Rheological Behavior of Pistachio Butter , 2009 .

[4]  Minggan Li,et al.  Modeling of the Flow Rate in the Dispensing-Based Process for Fabricating Tissue Scaffolds , 2008 .

[5]  Steve Granick,et al.  Slippery questions about complex fluids flowing past solids , 2003, Nature materials.

[6]  Howard A. Barnes,et al.  A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure , 1995 .

[7]  Ali Khademhosseini,et al.  Sequential assembly of cell‐laden hydrogel constructs to engineer vascular‐like microchannels , 2011, Biotechnology and bioengineering.

[8]  X.B. Chen,et al.  Effects of fluid properties on dispensing processes for electronics packaging , 2006, IEEE Transactions on Electronics Packaging Manufacturing.

[9]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[10]  Dilhan M. Kalyon,et al.  Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled Suspensions , 1989 .

[11]  Y. Duan,et al.  Rheological behavior and wall slip of concentrated coal water slurry in pipe flows , 2009 .

[12]  Xiongbiao Chen,et al.  Optimization of nanoparticles for cardiovascular tissue engineering , 2015, Nanotechnology.

[13]  Greg Schoenau,et al.  On the Flow Rate Dynamics in Time-Pressure Dispensing Processes , 2002 .

[14]  B. L. Davies,et al.  Analytical modelling of the automated dispensing of adhesive materials , 1995 .

[15]  D. Schreyer,et al.  Experimental approaches to vascularisation within tissue engineering constructs , 2015, Journal of biomaterials science. Polymer edition.

[16]  D. De Kee,et al.  Modelling steady and transient rheological properties , 1996 .

[17]  R. Gupta,et al.  Polymer and Composite Rheology , 2000 .

[18]  B. Frank Eames,et al.  3D Printing of Porous Cell-Laden Hydrogel Constructs for Potential Applications in Cartilage Tissue Engineering. , 2016, ACS biomaterials science & engineering.

[19]  M. Graham.  Wall slip and the nonlinear dynamics of large amplitude oscillatory shear flows , 1995 .

[20]  J. M. Franco,et al.  On slip effects in steady-state flow measurements of oil-in-water food emulsions , 1998 .

[21]  G. Schoenau,et al.  Modelling of time-pressure fluid dispensing processes , 2000 .

[22]  A J Verbout,et al.  Viable osteogenic cells are obligatory for tissue-engineered ectopic bone formation in goats. , 2003, Tissue engineering.

[23]  F. N. Cogswell,et al.  Converging flow of polymer melts in extrusion dies , 1972 .

[24]  W. J. Zhang,et al.  Off-line control of time-pressure dispensing processes for electronics packaging , 2003 .

[25]  Richard Y. K. Fung,et al.  Fuzzy regression-based mathematical programming model for quality function deployment , 2004 .

[26]  S. Hofmann,et al.  Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing , 2011, Journal of functional biomaterials.

[27]  H. Bai,et al.  Fuzzy regression approach to process modelling and optimization of epoxy dispensing , 2005 .

[28]  P. R. van Weeren,et al.  Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.

[29]  T. Aminabhavi,et al.  Novel sodium alginate/polyethyleneimine polyion complex membranes for pervaporation dehydration at the azeotropic composition of various alcohols , 2007 .

[30]  Ying Mei,et al.  Engineering alginate as bioink for bioprinting. , 2014, Acta biomaterialia.

[31]  Gap-Shik Chang,et al.  Wall slip of vaseline in steady shear rheometry , 2003 .

[32]  Fergal J O'Brien,et al.  The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering. , 2010, Biomaterials.

[33]  Han-Xiong Li,et al.  Integrated modelling of a time-pressure fluid dispensing system for electronics manufacturing , 2005 .

[34]  Antonio Lanzotti,et al.  Understanding Process Parameter Effects of RepRap Open-Source Three-Dimensional Printers Through a Design of Experiments Approach , 2015 .

[35]  P. Renaud,et al.  Microfluidic patterning of alginate hydrogels , 2007, Biointerphases.

[36]  H. Belmabrouk,et al.  Enhancement of the Analyte Mass Transport in a Microfluidic Biosensor by Deformation of Fluid Flow and Electrothermal Force , 2016 .

[37]  Dilhan M. Kalyon,et al.  Rheological behavior of a concentrated suspension: A solid rocket fuel simulant , 1993 .

[38]  L. P. Martínez-Padilla,et al.  QUANTIFYING THIXOTROPY OF BÉCHAMEL SAUCE UNDER CONSTANT SHEAR STRESS BY PHENOMENOLOGICAL AND EMPIRICAL MODELS , 1989 .

[39]  Jeroen Rouwkema,et al.  Vascularization in tissue engineering. , 2008, Trends in biotechnology.

[40]  A. B. Metzner,et al.  Apparent Slip Flow of Polymer Solutions , 1985 .

[41]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[42]  I. Manas‐Zloczower,et al.  Viscosity model for polydisperse polymer melts , 1998 .

[43]  D. Cheng,et al.  Phenomenological characterization of the rheological behaviour of inelastic reversible thixotropic and antithixotropic fluids , 1965 .

[44]  Xiongbiao Chen,et al.  Effect of needle geometry on flow rate and cell damage in the dispensing‐based biofabrication process , 2011, Biotechnology progress.

[45]  A F von Recum,et al.  Quantitative analysis of cell proliferation and orientation on substrata with uniform parallel surface micro-grooves. , 1996, Biomaterials.

[46]  Joseph Cesarano,et al.  Colloidal inks for directed assembly of 3-D periodic structures , 2002 .

[47]  X. B. Chen,et al.  Characterization of the flow behavior of alginate/hydroxyapatite mixtures for tissue scaffold fabrication , 2009, Biofabrication.

[48]  P. Luckham,et al.  Evaluation of slip in capillary extrusion of ceramic pastes , 2001 .

[49]  T. Zohdi.  On Necessary Pumping Pressures for Industrial Process-Driven Particle-Laden Fluid Flows , 2016 .

[50]  Ae Rin Son,et al.  Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device , 2016 .

[51]  B. Abu-Jdayil,et al.  A Comparative Study of Rheological Characteristics of Tomato Paste and Tomato Powder Solutions , 2004 .

[52]  C. H. Chou,et al.  Non-Newtonian flow in ducts of arbitrary cross-sectional shape , 1966 .

[53]  D. De Kee,et al.  Flow Properties of Time‐Dependent Foodstuffs , 1983 .