Two dimensional mortar contact methods for large deformation frictional sliding

This paper presents a mortar-based formulation for the solution of two dimensional frictional contact problems involving finite deformation and large sliding. As is widely recognized, traditional node-to-surface contact formulations have several drawbacks in solution of deformable-to-deformable contact problems, including lack of general patch test passage, degradation of spatial convergence rates, and robustness issues associated with the faceted representation of contacting surfaces. The mortar finite element method, initially proposed as a technique to join dissimilarly meshed domains, has been shown to preserve optimal convergence rates in tied contact problems (see (Discretization Methods and Iterative Solvers Based on Domain Decomposition, Springer-Verlag, Heidelberg, 2001) for a recent review), and is examined here as an alternative spatial discretization method for large sliding contact. In particular, a novel description for frictional sliding conditions in large deformation mortar formulations is proposed in this work. In recent years, the mortar element method has already been successfully implemented to solve frictional contact problems with linearized kinematics (see (Int. J. Numer. Meth. Engng 1993; 36: 3451)). However, in the presence of large deformations and finite sliding, one must face difficulties associated with the definition and linearization of contact virtual work in the case where the mortar projection has a direct dependence on the tangential relative motion along the interface. In this paper, such a formulation is presented, with particular emphasis on key aspects of the linearization procedure and on the robust description of the friction kinematics. Some novel techniques are proposed to treat the non-smoothness in the contact geometry and the searching required to define mortar segments. A number of numerical examples illustrate the performance and accuracy of the proposed formulation. Copyright © 2004 John Wiley & Sons, Ltd.

[1]  R. Taylor,et al.  A mixed formulation for the finite element solution of contact problems , 1992 .

[2]  Faker Ben Belgacem,et al.  The mortar finite element method for contact problems , 1998 .

[3]  Yvon Maday,et al.  A spectral element methodology tuned to parallel implementations , 1994 .

[4]  David J. Benson,et al.  Sliding interfaces with contact-impact in large-scale Lagrangian computations , 1985 .

[5]  T. Laursen,et al.  A mortar‐finite element formulation for frictional contact problems , 2000 .

[6]  David J. Benson,et al.  A single surface contact algorithm for the post-buckling analysis of shell structures , 1990 .

[7]  Resolution of fourth-order problems by the mortar element method , 1994 .

[8]  J. C. Simo,et al.  A perturbed Lagrangian formulation for the finite element solution of contact problems , 1985 .

[9]  Peter Wriggers,et al.  A note on tangent stiffness for fully nonlinear contact problems , 1985 .

[10]  J. Barbera,et al.  Contact mechanics , 1999 .

[11]  Anthony T. Patera,et al.  Nonconforming mortar element methods: Application to spectral discretizations , 1988 .

[12]  T. Laursen.  Computational Contact and Impact Mechanics , 2003 .

[13]  R. Krause,et al.  A Dirichlet–Neumann type algorithm for contact problems with friction , 2002 .

[14]  P. Wriggers,et al.  FINITE ELEMENT FORMULATION OF LARGE DEFORMATION IMPACT-CONTACT PROBLEMS WITH FRICTION , 1990 .

[15]  Patrick Hild,et al.  Numerical Implementation of Two Nonconforming Finite Element Methods for Unilateral Contact , 2000 .

[16]  Patrick Hild,et al.  Approximation of the unilateral contact problem by the mortar finite element method , 1997 .

[17]  Barbara I. Wohlmuth,et al.  Discretization Methods and Iterative Solvers Based on Domain Decomposition , 2001, Lecture Notes in Computational Science and Engineering.

[18]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[19]  J. C. Simo,et al.  A continuum-based finite element formulation for the implicit solution of multibody, large deformation-frictional contact problems , 1993 .

[20]  C. Bernardi,et al.  A New Nonconforming Approach to Domain Decomposition : The Mortar Element Method , 1994 .

[21]  M. Puso,et al.  A mortar segment-to-segment contact method for large deformation solid mechanics , 2004 .