Manufacturing and potential applications of lattice structures in thermal systems: A comprehensive review of recent advances

[1]  W. Yan,et al.  On the assessment of the mechanical properties of additively manufactured lattice structures , 2022, Engineering Analysis with Boundary Elements.

[2]  W. Yan,et al.  Liquid-to-vapor phase change heat transfer evaluation and parameter sensitivity analysis of nanoporous surface coatings , 2022, International Journal of Heat and Mass Transfer.

[3]  S. Deng,et al.  Tunning Lattice Thermal Conductivity of Bilayer and Trilayer Molybdenum Disulfide Thermoelectric Materials Through Twist Angles , 2022, SSRN Electronic Journal.

[4]  S. Sushanth Kumar,et al.  High performance, microarchitected, compact heat exchanger enabled by 3D printing , 2022, Applied Thermal Engineering.

[5]  F. Narita,et al.  Additive Manufacturing and Energy-Harvesting Performance of Honeycomb-Structured Magnetostrictive Fe52–Co48 Alloys , 2022, Additive Manufacturing.

[6]  U. Sajjad,et al.  Personal thermal management - A review on strategies, progress, and prospects , 2022, International Communications in Heat and Mass Transfer.

[7]  H. Ali,et al.  Experimental investigation on the performance of RT-44HC-nickel foam-based heat sinks for thermal management of electronic gadgets , 2022, International Journal of Heat and Mass Transfer.

[8]  A. Akbarzadeh,et al.  Heat Transfer in BCC Lattice Materials: Conduction, Convection, and Radiation , 2021, Composite Structures.

[9]  Chi-Chuan Wang,et al.  Boiling Heat Transfer Evaluation in Nanoporous Surface Coatings , 2021, Nanomaterials.

[10]  Chi-Chuan Wang,et al.  Determining the Factors Affecting the Boiling Heat Transfer Coefficient of Sintered Coated Porous Surfaces , 2021, Sustainability.

[11]  H. Ali,et al.  Effect of annealing on microstructures and mechanical properties of PA-12 lattice structures proceeded by multi jet fusion technology , 2021, Additive Manufacturing.

[12]  Zhonggang Wang,et al.  Large programmable coefficient of thermal expansion in additively manufactured bi-material mechanical metamaterial , 2021 .

[13]  Chi-Chuan Wang,et al.  Enhanced pool boiling of dielectric and highly wetting liquids – A review on surface engineering , 2021 .

[14]  F. Vivio,et al.  Comparison between finite element and experimental evidences of innovative W lattice materials for sacrificial limiter applications , 2021 .

[15]  Chi-Chuan Wang,et al.  A high-fidelity approach to correlate the nucleate pool boiling data of roughened surfaces , 2021 .

[16]  Yanyu Chen,et al.  Predicting thermal and mechanical performance of stochastic and architected foams , 2021, International Journal of Heat and Mass Transfer.

[17]  Tongbeum Kim,et al.  On thermally managing lithium-ion battery cells by air-convection aspirated in tetrahedral lattice porous cold plates , 2021 .

[18]  D. Therriault,et al.  Engineered bi-material lattices with thermo-mechanical programmability , 2021 .

[19]  Lixiao Li,et al.  Lightweight and low thermal conducted face-centered-cubic cementitious lattice materials (FCLMs) , 2021 .

[20]  R. Xu,et al.  Morphology, flow and heat transfer in triply periodic minimal surface based porous structures , 2021 .

[21]  A. Onorati,et al.  Instationary heat and mass transfer phenomena in additive manufactured open cell polyhedral structures for automotive catalysis , 2021, Chemical Engineering Science.

[22]  Ying Li,et al.  Thermal insulation performance and heat transfer mechanism of C/SiC corrugated lattice core sandwich panel , 2021 .

[23]  X. Gong,et al.  Experimental study on the thermal response of PCM-based heat sink using structured porous material fabricated by 3D printing , 2021 .

[24]  Prashant Singh,et al.  Critical evaluation of additively manufactured metal lattices for viability in advanced heat exchangers , 2021 .

[25]  Prashant Singh,et al.  Prediction of effective thermal conductivity of porous lattice structures and validation with additively manufactured metal foams , 2021 .

[26]  Keun Park,et al.  Design and additive manufacturing of thermal metamaterial with high thermal resistance and cooling capability , 2021 .

[27]  Chi-Chuan Wang,et al.  Enhancing corrosion resistance of Al 5050 alloy based on surface roughness and its fabrication methods; an experimental investigation , 2021 .

[28]  Wesley A. Chapkin,et al.  Mechanical behavior and energy dissipation of infilled, composite Ti-6Al-4V trusses , 2021, Materials & Design.

[29]  S. Bargmann,et al.  Tunable auxeticity and isotropic negative thermal expansion in three-dimensional lattice structures of cubic symmetry , 2021 .

[30]  Prashant Singh,et al.  Numerical investigation on conjugate heat transfer in octet-shape-based single unit cell thick metal foam , 2021 .

[31]  Jiafei Zhao,et al.  Simulation of forced convective heat transfer in Kelvin cells with optimized skeletons , 2021 .

[32]  Ankang Kan,et al.  Numerical investigation on effective thermal conductivity of fibrous porous medium under vacuum using Lattice-Boltzmann method , 2021 .

[33]  V. Silberschmidt,et al.  Thermal performance of additively manufactured polymer lattices , 2021, Journal of Building Engineering.

[34]  M. Chyu,et al.  Mitigation effects of Body-Centered Cubic Lattices on the heat transfer deterioration of supercritical CO2 , 2021 .

[35]  Chi-Chuan Wang,et al.  ENHANCING BOILING HEAT TRANSFER FOR ELECTRONICS COOLING BY EMBEDDING AN ARRAY OF MICROGROOVES INTO SANDBLASTED SURFACES , 2021 .

[36]  P. Nithiarasu,et al.  Numerical evaluation of additively manufactured lattice architectures for heat sink applications , 2021, International Journal of Thermal Sciences.

[37]  J. Thöming,et al.  Structure-heat transport analysis of periodic open-cell foams to be used as catalyst carriers , 2020 .

[38]  M. Chandrasekar,et al.  Thermal performance of nano-enriched form-stable PCM implanted in a pin finned wall-less heat sink for thermal management application , 2020 .

[39]  M. Belmonte,et al.  Heat dissipation in 3D printed cellular aluminum nitride structures , 2020 .

[40]  Chi-Chuan Wang,et al.  Enhanced pool boiling of dielectric and highly wetting liquids - a review on enhancement mechanisms , 2020 .

[41]  S. Krishnan,et al.  Experimental investigation on the local heat transfer with a circular jet impinging on a metal foamed flat plate , 2020 .

[42]  Hai‐Tao Liu,et al.  A novel 3-D structure with tunable Poisson's ratio and adjustable thermal expansion , 2020 .

[43]  Zhonggang Wang,et al.  Additively Manufactured Bi-Material Metamaterial To Program a Wide Range of Thermal Expansion , 2020 .

[44]  Z. Qu,et al.  Pore-scale heat transfer of heat sink filled with stacked 2D metal fiber-PCM composite , 2020 .

[45]  D. Fang,et al.  Stereolithography additive manufacturing of multi-ceramic triangle structures with tunable thermal expansion , 2020 .

[46]  Jiafei Zhao,et al.  Numerical simulation on the forced convection heat transfer of porous medium for turbine engine heat exchanger applications , 2020 .

[47]  Thermal conduction in three-dimensional printed porous samples by high resolution infrared thermography , 2020 .

[48]  N. Yang,et al.  3D kirigami metamaterials with coded thermal expansion properties , 2020, Extreme Mechanics Letters.

[49]  Wonjung Kim,et al.  Plant leaf inspired evaporative heat sink with a binary porous structure , 2020 .

[50]  R. Serhane,et al.  Investigation of heat transfer improvement at idealized microcellular scale for metal foam incorporated with paraffin , 2020 .

[51]  Yongdong Meng,et al.  Experimental demonstration of lightweight lattice metamaterials with controllable low thermal expansion , 2020, Thin-Walled Structures.

[52]  Jiping Lu,et al.  Design and Optimization of Lattice Structures: A Review , 2020, Applied Sciences.

[53]  Haichuan Jin,et al.  Thermal performance of a 3D printed lattice-structure heat sink packaging phase change material , 2020 .

[54]  Minghui Fu,et al.  A novel 3D structure with tunable Poisson’s ratio and tailorable coefficient of thermal expansion based on a tri-material triangle unit , 2020 .

[55]  A. Robinson,et al.  Experimental characterization of a hybrid impinging microjet-microchannel heat sink fabricated using high-volume metal additive manufacturing , 2020 .

[56]  X. Gong,et al.  Experimental and numerical investigation on thermal performance enhancement of phase change material embedding porous metal structure with cubic cell , 2020 .

[57]  Hadi Rostamzadeh,et al.  Heat transfer and entropy generation analysis in a three-dimensional impinging jet porous heat sink under local thermal non-equilibrium condition , 2020 .

[58]  K. Bilen,et al.  Experimental based numerical approach for determination of volumetric heat transfer coefficients of modified graphite foams , 2020 .

[59]  W. Chiu,et al.  Anisotropic convective heat transfer in open-cell metal foams: Assessment and correlations , 2020, International Journal of Heat and Mass Transfer.

[60]  D. Fang,et al.  Effective thermal conductivity and heat transfer characteristics for a series of lightweight lattice core sandwich panels , 2020, Applied Thermal Engineering.

[61]  M. Chyu,et al.  Investigating the effect of element shape of the face-centered cubic lattice structure on the flow and endwall heat transfer characteristics in a rectangular channel , 2020 .

[62]  Jiafei Zhao,et al.  Pore-scale simulation of forced convection heat transfer under turbulent conditions in open-cell metal foam , 2020, Chemical Engineering Journal.

[63]  I. Ashcroft,et al.  On the thermal conductivity of AlSi10Mg and lattice structures made by laser powder bed fusion , 2020 .

[64]  K. Leong,et al.  Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement , 2020 .

[65]  H. Rahimi,et al.  Numerical investigation on hydraulic and thermal characteristics of micro latticed pin fin in the heat sink , 2020 .

[66]  Yong Chan Kim,et al.  Heat transfer and stress characteristics of additive manufactured FCCZ lattice channel using thermal fluid-structure interaction model , 2020 .

[67]  Li Ma,et al.  1D to 3D multi-stable architected materials with zero Poisson's ratio and controllable thermal expansion , 2020 .

[68]  G. Xie,et al.  An X-lattice cored rectangular honeycomb with enhanced convective heat transfer performance , 2020 .

[69]  H. Freund,et al.  Additive manufacturing of interpenetrating periodic open cellular structures (interPOCS) with in operando adjustable flow characteristics , 2020 .

[70]  Chengbin Zhang,et al.  Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material , 2020 .

[71]  Naseem Abbas,et al.  Optimization of Cr Seed Layer Effect for Surface Roughness of As-Deposited Silver Film using Electron Beam Deposition Method , 2020 .

[72]  Chi-Chuan Wang,et al.  NUCLEATE POOL BOILING OF SINTERED COATED POROUS SURFACES WITH DIELECTRIC LIQUID, HFE-7200 , 2020 .

[73]  Zisheng Liao,et al.  An additively manufactured silicone polymer: Thermo-viscoelastic experimental study and computational modelling , 2020, Additive Manufacturing.

[74]  H. Ali,et al.  Experimental study on the thermal behavior of RT-35HC paraffin within copper and Iron-Nickel open cell foams: Energy storage for thermal management of electronics , 2020, International Journal of Heat and Mass Transfer.

[75]  D. Fang,et al.  Mechanical analysis and modeling of metallic lattice sandwich additively fabricated by selective laser melting , 2020 .

[76]  D. Reay,et al.  A metal additively manufactured (MAM) heat exchanger for electric motor thermal control on a high-altitude solar aircraft – Experimental characterisation , 2020 .

[77]  Shutian Liu,et al.  Convective heat transfer enhancement by novel honeycomb-core in sandwich panel exchanger fabricated by additive manufacturing , 2019 .

[78]  F. Zhu,et al.  Experimental and numerical study on the thermal behavior of phase change material infiltrated in low porosity metal foam , 2019, Journal of Energy Storage.

[79]  Hao Li,et al.  Experimental and numerical investigation of liquid-cooled heat sinks designed by topology optimization , 2019 .

[80]  A. Clare,et al.  Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion , 2019 .

[81]  H. Ali,et al.  Thermal performance analysis of metallic foam-based heat sinks embedded with RT-54HC paraffin: an experimental investigation for electronic cooling , 2019, Journal of Thermal Analysis and Calorimetry.

[82]  H. Ahmad,et al.  Analytical and numerical predictions of the thermal performance of multi-layered lattice structures , 2019, International Journal of Heat and Mass Transfer.

[83]  G. Xie,et al.  Heat transfer enhancement of wedge-shaped channels by replacing pin fins with Kagome lattice structures , 2019, International Journal of Heat and Mass Transfer.

[84]  A. Akbarzadeh,et al.  Thermo-mechanical bending of architected functionally graded cellular beams , 2019, Composites Part B: Engineering.

[85]  Jean-Philippe Pernot,et al.  Parametric design of graded truss lattice structures for enhanced thermal dissipation , 2019, Comput. Aided Des..

[86]  S. Krishnan,et al.  Experimental investigation of heat transfer and fluid flow in octet-truss lattice geometry , 2019, International Journal of Thermal Sciences.

[87]  Martin Veidt,et al.  Evaluation of the mechanical compatibility of additively manufactured porous Ti-25Ta alloy for load-bearing implant applications. , 2019, Journal of the mechanical behavior of biomedical materials.

[88]  D. Therriault,et al.  Thermal conductivity of architected cellular metamaterials , 2019, Acta Materialia.

[89]  Naseem Abbas,et al.  Investigating the performance of GFRP/wood-based honeycomb sandwich panels for sustainable prefab building construction , 2019, SN Applied Sciences.

[90]  A. A. Zadpoor,et al.  Additively manufactured porous metallic biomaterials. , 2019, Journal of materials chemistry. B.

[91]  K. Kim,et al.  Potentials of porous materials for energy management in heat exchangers – A comprehensive review , 2019, Applied Energy.

[92]  W. Yan,et al.  A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams , 2019, International Journal of Heat and Mass Transfer.

[93]  D. He,et al.  Thermal effect on the microstructure of the lattice structure Cu-10Sn alloy fabricated through selective laser melting , 2019, Journal of Alloys and Compounds.

[94]  D. Fang,et al.  Heat transfer mechanism and characteristics of lightweight high temperature ceramic cellular sandwich , 2019, Applied Thermal Engineering.

[95]  Jian Wang,et al.  Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling , 2019, Applied Energy.

[96]  S. Krishnan,et al.  Fluid flow and heat transfer characteristics of octet truss lattice geometry , 2019, International Journal of Thermal Sciences.

[97]  Kai Choong Leong,et al.  Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting , 2019, International Journal of Thermal Sciences.

[98]  Congliang Huang,et al.  Thermal conductivity model of open-cell foam suitable for wide span of porosities , 2019, International Journal of Heat and Mass Transfer.

[99]  G. Vignoles,et al.  Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer , 2019, Materials & Design.

[100]  D. Fang,et al.  Thermal protection system integrating graded insulation materials and multilayer ceramic matrix composite cellular sandwich panels , 2019, Composite structures.

[101]  W. Pabst,et al.  Thermal conductivity and Young's modulus of cubic-cell metamaterials , 2019, Ceramics International.

[102]  A. A. Zadpoor.  Meta-biomaterials. , 2019, Biomaterials science.

[103]  H. Ali,et al.  Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems , 2018, International Journal of Heat and Mass Transfer.

[104]  B. Sundén,et al.  Comparative evaluations of thermofluidic characteristics of sandwich panels with X-lattice and Pyramidal-lattice cores , 2018, International Journal of Heat and Mass Transfer.

[105]  H. Ali,et al.  Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling , 2018, International Communications in Heat and Mass Transfer.

[106]  D. Fang,et al.  Mechanical responses of titanium 3D kagome lattice structure manufactured by selective laser melting , 2018, Extreme Mechanics Letters.

[107]  G. Xie,et al.  The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels , 2018, Applied Thermal Engineering.

[108]  Alfredo Ronca,et al.  The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction , 2018, Materials & Design.

[109]  P. Goetze,et al.  Homogenized and pore-scale analyses of forced convection through open cell foams , 2018, International Journal of Heat and Mass Transfer.

[110]  G. Groppi,et al.  A fundamental analysis of the influence of the geometrical properties on the effective thermal conductivity of open-cell foams , 2018, Chemical Engineering and Processing - Process Intensification.

[111]  D. C. Blaine,et al.  Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing , 2018, Virtual and Physical Prototyping.

[112]  Nan Li,et al.  Light-weighting in aerospace component and system design , 2018, Propulsion and Power Research.

[113]  M. Siavashi,et al.  Optimization of heat transfer enhancement and pumping power of a heat exchanger tube using nanofluid with gradient and multi-layered porous foams , 2018, Applied Thermal Engineering.

[114]  S. Masood,et al.  Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM , 2018 .

[115]  Sami Kara,et al.  Design, analysis and manufacturing of lattice structures: an overview , 2018, Int. J. Comput. Integr. Manuf..

[116]  David Z. Zhang,et al.  Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting , 2018, Materials.

[117]  Xujing Yang,et al.  Structural and thermal analysis of integrated thermal protection systems with C/SiC composite cellular core sandwich panels , 2018 .

[118]  C. M. Portela,et al.  Additive manufacturing of 3D nano-architected metals , 2018, Nature Communications.

[119]  Ole Sigmund,et al.  Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures , 2016, IEEE Transactions on Visualization and Computer Graphics.

[120]  L. Magerramova,et al.  APPLICATION OF LIGHT LATTICE STRUCTURES FOR GAS TURBINE ENGINE FAN BLADES , 2018 .

[121]  Xin-Lin Gao,et al.  Three-dimensional metamaterials with a negative Poisson's ratio and a non-positive coefficient of thermal expansion , 2018 .

[122]  Rashid K. Abu Al-Rub,et al.  Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials , 2018 .

[123]  Weidong Song,et al.  Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: Experiments , 2018 .

[124]  P. Terriault,et al.  Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing. , 2018, Journal of the mechanical behavior of biomedical materials.

[125]  T. Lu,et al.  Convective heat transfer in a lightweight multifunctional sandwich panel with X-type metallic lattice core , 2017 .

[126]  J. Weibel,et al.  Design of Multifunctional Lattice‐Frame Materials for Compact Heat Exchangers , 2017 .

[127]  T. Zeng,et al.  High temperature mechanical properties of lightweight C/SiC composite pyramidal lattice core sandwich panel , 2017 .

[128]  Yaoyao Fiona Zhao,et al.  A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing , 2017 .

[129]  R. He,et al.  High temperature mechanical behaviors of lightweight ceramic corrugated core sandwich panel , 2017 .

[130]  Xin Jin,et al.  Thermo-Fluidic Comparison between Sandwich Panels with Tetrahedral Lattice Cores Fabricated by Casting and Metal Sheet Folding , 2017 .

[131]  Seung-Kyum Choi,et al.  Uncertainty quantification and validation of 3D lattice scaffolds for computer-aided biomedical applications. , 2017, Journal of the mechanical behavior of biomedical materials.

[132]  M. Badrossamay,et al.  Mechanical characterization and finite element modeling of polylactic acid BCC-Z cellular lattice structures fabricated by fused deposition modeling , 2017 .

[133]  Xin-Lin Gao,et al.  Metamaterials with negative Poisson’s ratio and non-positive thermal expansion , 2017 .

[134]  D. Fang,et al.  Design and analysis of integrated thermal protection system based on lightweight C/SiC pyramidal lattice core sandwich panel , 2016 .

[135]  C. Beyer,et al.  Design and Analysis of Lattice Structures for Additive Manufacturing , 2016 .

[136]  Jihong Zhu,et al.  Topology Optimization in Aircraft and Aerospace Structures Design , 2016 .

[137]  Frank W. Zok,et al.  Periodic truss structures , 2016 .

[138]  A. Ortona,et al.  Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles , 2016 .

[139]  Ole Sigmund,et al.  Industrial application of topology optimization for combined conductive and convective heat transfer problems , 2016 .

[140]  Zian Jia,et al.  Hierarchical honeycomb lattice metamaterials with improved thermal resistance and mechanical properties , 2016 .

[141]  T. Lu,et al.  Heat transfer enhancement by X-type lattice in ventilated brake disc , 2016 .

[142]  R. Mahshid,et al.  Strength analysis and modeling of cellular lattice structures manufactured using selective laser melting for tooling applications , 2016 .

[143]  P. Lee,et al.  Failure Analysis of an Additive Manufactured Porous Titanium Structure for Orthopedic Implant Applications , 2016 .

[144]  Yaoyao Fiona Zhao,et al.  A survey of the design methods for additive manufacturing to improve functional performance , 2016 .

[145]  Enrico Bianchi,et al.  Assessment of Periodic Open Cellular Structures for Enhanced Heat Conduction in Catalytic Fixed‐Bed Reactors , 2016 .

[146]  A. Tyas,et al.  Energy absorption in lattice structures in dynamics: Experiments , 2016 .

[147]  D. Pasini,et al.  High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. , 2016, Acta biomaterialia.

[148]  D. Fang,et al.  Planar lattices with tailorable coefficient of thermal expansion and high stiffness based on dual-material triangle unit , 2016 .

[149]  Amir Faghri,et al.  Heat pipe heat exchangers and heat sinks: Opportunities, challenges, applications, analysis, and state of the art , 2015 .

[150]  Henk Huisseune,et al.  Influence of Orientation and Radiative Heat Transfer on Aluminum Foams in Buoyancy-Induced Convection , 2015, Materials.

[151]  Ole Sigmund,et al.  Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection , 2015, ArXiv.

[152]  Dazhong Wu,et al.  Scalability Planning for Cloud-Based Manufacturing Systems , 2015 .

[153]  D. Fang,et al.  Fabrication and heat transfer characteristics of C/SiC pyramidal core lattice sandwich panel , 2015 .

[154]  Xuan Song,et al.  Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing , 2015 .

[155]  H. Freund,et al.  Numerical simulation of heat transfer in the near-wall region of tubular reactors packed with metal open-cell foams , 2015 .

[156]  D. Fang,et al.  A lightweight, high compression strength ultra high temperature ceramic corrugated panel with potential for thermal protection system applications , 2015 .

[157]  Yong Huang,et al.  Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .

[158]  D. Fang,et al.  Fabrication and mechanical properties of lightweight ZrO2 ceramic corrugated core sandwich panels , 2014 .

[159]  Christiane Beyer,et al.  Strategic Implications of Current Trends in Additive Manufacturing , 2014 .

[160]  D. Fang,et al.  Heat transfer mechanism of the C/SiC ceramics pyramidal lattice composites , 2014 .

[161]  Seung Ki Moon,et al.  Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures , 2014, International Journal of Precision Engineering and Manufacturing-Green Technology.

[162]  A. Ortona,et al.  CONVECTIVE HEAT TRANSFER IN CELLULAR CERAMIC: A 3D NUMERICAL SOLUTION , 2014 .

[163]  P. Bar-Yoseph,et al.  Design, Analysis and Additive Manufacturing of Porous Structures for Biocompatible Micro-Scale Scaffolds☆ , 2013 .

[164]  Li Yang,et al.  Non-stochastic Ti–6Al–4V foam structures with negative Poisson's ratio , 2012 .

[165]  Enrico Bianchi,et al.  An appraisal of the heat transfer properties of metallic open-cellfoams for strongly exo-/endo-thermic catalytic processes in tubular reactors , 2012 .

[166]  T. Schaedler,et al.  Multifunctional heat exchangers derived from three-dimensional micro-lattice structures , 2012 .

[167]  W. Tao,et al.  A theoretical octet-truss lattice unit cell model for effective thermal conductivity of consolidated porous materials saturated with fluid , 2012 .

[168]  V. V. Vasiliev,et al.  Anisogrid composite lattice structures – Development and aerospace applications ☆ , 2012 .

[169]  A. J. Jacobsen,et al.  Fluid dynamics of flow through microscale lattice structures formed from self‐propagating photopolymer waveguides , 2011 .

[170]  Takayuki Yamada,et al.  A Level Set-Based Topology Optimization Method for Maximizing Thermal Diffusivity in Problems Including Design-Dependent Effects , 2011 .

[171]  M. D. Paepe,et al.  The use of open cell metal foams in heat exchangers: possibilities and limitations , 2011 .

[172]  Indrani Ghosh.  How Good Is Open-Cell Metal Foam as Heat Transfer Surface? , 2009 .

[173]  Z. Gürdal,et al.  Optimal design of composite lattice shell structures for aerospace applications , 2009 .

[174]  S. Nishiwaki,et al.  Topology optimization for thermal conductors considering design-dependent effects, including heat conduction and convection , 2009 .

[175]  Jihong Zhu,et al.  Topology optimization of heat conduction problem involving design-dependent heat load effect , 2008 .

[176]  R. Singer,et al.  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.

[177]  N. Pan,et al.  Modeling and prediction of the effective thermal conductivity of random open-cell porous foams , 2008 .

[178]  J. Murthy,et al.  Simulation of Thermal Transport in Open-Cell Metal Foams: Effect of Periodic Unit-Cell Structure , 2008 .

[179]  Howard P. Hodson,et al.  Cross flow heat exchange of textile cellular metal core sandwich panels , 2007 .

[180]  V. V. Vasiliev,et al.  Anisogrid composite lattice structures for spacecraft and aircraft applications , 2006 .

[181]  L. Valdevit,et al.  Optimal active cooling performance of metallic sandwich panels with prismatic cores , 2006 .

[182]  Douglas T. Queheillalt,et al.  Forced convection in metallic honeycomb structures , 2006 .

[183]  L. Valdevit,et al.  Active cooling by metallic sandwich structures with periodic cores , 2005 .

[184]  H. Hodson,et al.  Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger , 2004 .

[185]  Howard P. Hodson,et al.  Convective heat dissipation with lattice-frame materials , 2004 .

[186]  Douglas T. Queheillalt,et al.  The effects of topology upon fluid-flow and heat-transfer within cellular copper structures , 2004 .

[187]  H. Hodson,et al.  Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material , 2004 .

[188]  Jonathan E. Didier,et al.  Synthesis of polyurethane foam scaffolds for bone tissue engineering , 2004 .

[189]  N. Shikazono,et al.  ASSESSMENT OF HIGH-PERFORMANCE COMPACT MICRO BARE-TUBE HEAT EXCHANGERS FOR ELECTRONIC EQUIPMENT COOLING , 2003 .

[190]  R. Mahajan,et al.  Thermophysical properties of high porosity metal foams , 2002 .

[191]  T. Lu,et al.  On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity , 2001 .

[192]  M. Ashby,et al.  FOAM TOPOLOGY BENDING VERSUS STRETCHING DOMINATED ARCHITECTURES , 2001 .

[193]  D. Poulikakos,et al.  On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam , 2001 .

[194]  Michael F. Ashby,et al.  Multifunctionality of cellular metal systems , 1998 .