3D printing graphene-aluminum nanocomposites

[1]  G. Cheng,et al.  Laser additive manufacturing bulk graphene–copper nanocomposites , 2017, Nanotechnology.

[2]  Toly Chen,et al.  Feasibility Evaluation and Optimization of a Smart Manufacturing System Based on 3D Printing: A Review , 2017, Int. J. Intell. Syst..

[3]  J. Kruth,et al.  Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing , 2017 .

[4]  Xihua Zhang,et al.  Microstructure and tribological behavior of NiAl/WC composites fabricated by thermal explosion reaction at 800 °C , 2017 .

[5]  W. Dudziński,et al.  Chemical and Morphological Characterization of Magnetron Sputtered at Different Bias Voltages Cr-Al-C Coatings , 2017, Materials.

[6]  M. Zhang,et al.  Laser sintered single layer graphene oxide reinforced titanium matrix nanocomposites , 2016 .

[7]  G. Cheng,et al.  Laser sintered graphene nickel nanocomposites , 2016 .

[8]  Andrew J. Pinkerton,et al.  [INVITED] Lasers in additive manufacturing , 2016 .

[9]  Jinwu Kang,et al.  Novel application of ultrasonic cavitation for fabrication of TiN/Al composites , 2016 .

[10]  G. Tong,et al.  Graphene-reinforced metal matrix nanocomposites – a review , 2016 .

[11]  H. Akbulut,et al.  The effect of graphene content and sliding speed on the wear mechanism of nickel–graphene nanocomposites , 2015 .

[12]  X. M. Zhang,et al.  Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites , 2015 .

[13]  Zengrong Hu,et al.  Laser sintered thin layer graphene and cubic boron nitride reinforced nickel matrix nanocomposites , 2015, Applied Optics and Photonics China.

[14]  Chen Hong,et al.  Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance , 2015 .

[15]  Wenzheng Zhai,et al.  Investigation of mechanical and tribological behaviors of multilayer graphene reinforced Ni3Al matrix composites , 2015 .

[16]  Xueding Wang,et al.  Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling , 2015 .

[17]  Jun Gou,et al.  Development of magnesium-graphene nanoplatelets composite , 2015 .

[18]  X. M. Zhang,et al.  Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles , 2015 .

[19]  R. Peréz-Bustamante,et al.  Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying , 2014 .

[20]  G. Cheng,et al.  Single-layer graphene oxide reinforced metal matrix composites by laser sintering: Microstructure and mechanical property enhancement , 2014 .

[21]  Zhang Zhichao,et al.  Interfacial microstructure and growth mechanism of Al4C3 in Grf/Al composites fabricated by liquid pressure method. , 2014, Micron.

[22]  Zan Li,et al.  Uniform dispersion of graphene oxide in aluminum powder by direct electrostatic adsorption for fabrication of graphene/aluminum composites , 2014, Nanotechnology.

[23]  Xiaoming Yang,et al.  Enhancement of the mechanical properties of graphene–copper composites with graphene–nickel hybrids , 2014 .

[24]  Shiren Wang,et al.  Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering , 2014 .

[25]  H. Che,et al.  Highly enhanced mechanical properties in Cu matrix composites reinforced with graphene decorated metallic nanoparticles , 2014, Journal of Materials Science.

[26]  C. Jia,et al.  Enhanced strength in bulk graphene–copper composites , 2014 .

[27]  Yang Shao-ji.  Research of Graphene-reinforced Aluminum Matrix Nanocomposites , 2014 .

[28]  M. A. Xavior,et al.  The Effect of Ball Milling & Reinforcement Percentage on Sintered Samples of Aluminium Alloy Metal Matrix Composites☆ , 2014 .

[29]  Shiren Wang,et al.  Fabrication of Graphene Reinforced Aluminum Composite by Semi-Solid Processing , 2013 .

[30]  Lei Liu,et al.  Graphene–nickel composites , 2013 .

[31]  Di Zhang,et al.  Reinforcement with graphene nanosheets in aluminum matrix composites , 2012 .

[32]  H. Geng,et al.  The influence of SiO2 on the aluminum borate whisker reinforced aluminum phosphate wave-transparent materials , 2012 .

[33]  N. Koratkar,et al.  Graphene–aluminum nanocomposites , 2011 .

[34]  D. Božić,et al.  Effects of copper and Al2O3 particles on characteristics of Cu–Al2O3 composites , 2010 .

[35]  S. R. Bakshi,et al.  Carbon nanotube reinforced metal matrix composites - a review , 2010 .

[36]  Philip Kim,et al.  Charge transfer chemical doping of few layer graphenes: charge distribution and band gap formation. , 2009, Nano letters.

[37]  Y. Kawazoe,et al.  Ferromagnetism in semihydrogenated graphene sheet. , 2009, Nano letters.

[38]  A. Ferrari,et al.  Raman spectroscopy of graphene and graphite: Disorder, electron phonon coupling, doping and nonadiabatic effects , 2007 .

[39]  L. Ci,et al.  Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum , 2006 .

[40]  S. Tjong,et al.  High-temperature creep behavior of TiC particulate reinforced Ti–6Al–4V alloy composite , 2002 .

[41]  Ji Liang,et al.  Fabrication of aluminum-carbon nanotube composites and their electrical properties , 1999 .

[42]  R. Hauert,et al.  XPS investigation of the a-C:H/Al interface , 1993 .