Numerical modelling of ductile fracture in blanking

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers.

[1]  Rhj Ron Peerlings.  Enhanced damage modelling for fracture and fatigue , 1999 .

[2]  O. Zienkiewicz,et al.  A new approach to the development of automatic quadrilateral mesh generation , 1991 .

[3]  W. H. Peters,et al.  Application of an optimized digital correlation method to planar deformation analysis , 1986, Image Vis. Comput..

[4]  W. Brekelmans,et al.  Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling , 1998 .

[5]  J. Z. Zhu,et al.  The superconvergent patch recovery and a posteriori error estimates. Part 1: The recovery technique , 1992 .

[6]  I. L. Lim,et al.  A finite element code for fracture propagation analysis within elasto-plastic continuum , 1996 .

[7]  M. Ortiz,et al.  Modelling and simulation of high-speed machining , 1995 .

[8]  P. Thomason,et al.  A VIEW ON DUCTILE‐FRACTURE MODELLING , 1998 .

[9]  Taylan Altan,et al.  Material fracture and burr formation in blanking results of FEM simulations and comparison with experiments , 1996 .

[10]  Bijan Boroomand,et al.  RECOVERY BY EQUILIBRIUM IN PATCHES (REP) , 1997 .

[11]  P.J.G. Schreurs,et al.  Simulation of forming processes, using the arbitrary Eulerian Lagrangian formulation , 1986 .

[12]  Ernst Rank,et al.  Adaptive mesh generation and transformation of triangular to quadrilateral meshes , 1993 .

[13]  N. Fleck,et al.  Softening by void nucleation and growth in tension and shear , 1989 .

[14]  Klaus-Jürgen Bathe,et al.  Error indicators and adaptive remeshing in large deformation finite element analysis , 1994 .

[15]  I. Babuska,et al.  A‐posteriori error estimates for the finite element method , 1978 .

[16]  David R. Owen,et al.  On error estimates and adaptivity in elastoplastic solids: Applications to the numerical simulation of strain localization in classical and Cosserat continua , 1994 .

[17]  J. Z. Zhu,et al.  The superconvergent patch recovery and a posteriori error estimates. Part 2: Error estimates and adaptivity , 1992 .

[18]  Viggo Tvergaard,et al.  Effect of crack meandering on dynamic, ductile fracture , 1992 .

[19]  Jonathan Richard Shewchuk,et al.  Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator , 1996, WACG.

[20]  Folco Casadei,et al.  ALE stress update for transient and quasistatic processes , 1998 .

[21]  Mgd Marc Geers,et al.  Strain-based transient-gradient damage model for failure analyses , 1998 .

[22]  Hubertus Anna Joseph Knops,et al.  Numerical simulation of crack growth in pressurized fuselages , 1994 .

[23]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[24]  F. A. McClintock,et al.  A Criterion for Ductile Fracture by the Growth of Holes , 1968 .

[25]  R. J.,et al.  ON THE DUCTILE ENLARGEMENT OF VOIDS IN TRIAXIAL STRESS FIET , DS , 1969 .

[26]  M. Rubin.  An elastic-viscoplastic model exhibiting continuity of solid and fluid states , 1987 .

[27]  Wam Marcel Brekelmans,et al.  A Constitutive Equation for the Elasto-Viscoplastic Deformation of Glassy Polymers , 1997 .

[28]  O. C. Zienkiewicz,et al.  Superconvergence and the superconvergent patch recovery , 1995 .

[29]  Barry Hilary Valentine Topping,et al.  A simple and efficient method for converting triangular meshes to mixed meshes in parallel mesh generation. , 1997 .

[30]  Rhj Ron Peerlings,et al.  Gradient enhanced damage for quasi-brittle materials , 1996 .

[31]  D. M. Tracey,et al.  On the ductile enlargement of voids in triaxial stress fields , 1969 .

[32]  J. Huetink.  On the simulation of thermo-mechanical forming processes , 1986 .

[33]  O. C. Zienkiewicz,et al.  The three R's of engineering analysis and error estimation and adaptivity , 1990 .

[34]  C. Könke,et al.  Damage evolution in ductile materials: from micro- to macro-damage , 1995 .

[35]  M. F.,et al.  Bibliography , 1985, Experimental Gerontology.

[36]  A. I. Leonov.  Nonequilibrium thermodynamics and rheology of viscoelastic polymer media , 1976 .

[37]  Jean Lemaitre,et al.  Local approach of fracture , 1986 .

[38]  白以龙,et al.  Ductile Fracture and Ductility: With Applications to Metalworking , 1987 .

[39]  S. Shima,et al.  Criteria for ductile fracture and their applications , 1980 .

[40]  Yonggang Huang,et al.  Accurate Dilatation Rates for Spherical Voids in Triaxial Stress Fields , 1991 .

[41]  John W. Hutchinson,et al.  Void Growth in Plastic Solids , 1992 .

[42]  Fpt Frank Baaijens.  Calculation of residual stresses in injection molded products , 1991 .

[43]  O. C. Zienkiewicz,et al.  A simple error estimator and adaptive procedure for practical engineerng analysis , 1987 .

[44]  H. Borouchaki,et al.  Adaptive triangular–quadrilateral mesh generation , 1998 .

[45]  Pfm Paul Meurs.  Characterisation of microphenomena in transversely loaded composite materials , 1998 .

[46]  C. Vreugdenhil,et al.  Numerical methods for advection-diffusion problems , 1993 .

[47]  Fpt Frank Baaijens,et al.  An experimental and numerical study of a planar blanking process , 1999 .

[48]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[49]  D. Borst,et al.  Fundamental issues in finite element analyses of localization of deformation , 1993 .

[50]  F. Baaijens.  Numerical experiments with a discontinuous galerkin method including monotonicity enforcement on the stick-slip problem , 1994 .

[51]  S. Clift,et al.  Fracture prediction in plastic deformation processes , 1990 .

[52]  V. Tvergaard.  Material Failure by Void Growth to Coalescence , 1989 .

[53]  John M. Sullivan,et al.  Automatic conversion of triangular finite element meshes to quadrilateral elements , 1991 .

[54]  Constantin Iliescu.  Cold-pressing technology , 1990 .

[55]  Wing Kam Liu,et al.  Lagrangian-Eulerian finite element formulation for incompressible viscous flows☆ , 1981 .

[56]  Mhh Marcel Meuwissen,et al.  An inverse method for the mechanical characterisation of metals , 1998 .

[57]  Robert H. Dodds,et al.  Numerical procedures to model ductile crack extension , 1993 .

[58]  E. Gdoutos,et al.  Fracture Mechanics , 2020, Encyclopedic Dictionary of Archaeology.

[59]  Fpt Frank Baaijens,et al.  Prediction of ductile fracture in metal blanking , 2000 .

[60]  C. Lee,et al.  A new scheme for the generation of a graded quadrilateral mesh , 1994 .

[61]  Tomasz Wierzbicki,et al.  A tension zone model of blanking and tearing of ductile metal plates , 1996 .

[62]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[63]  S. Valente.  Heuristic softening strip model in the prediction of crack trajectories , 1993 .

[64]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[65]  D. Owen,et al.  Adaptive Strategy For Ductile Fracture Analysis In Damaged Elastoplastic Solids , 1998 .

[66]  T. A. Kals,et al.  Miniaturization in sheet metal working , 2000 .

[67]  C. Shih,et al.  Family of crack-tip fields characterized by a triaxiality parameter—I. Structure of fields , 1991 .

[68]  Mgd Marc Geers,et al.  Computing strain fields from discrete displacement fields in 2D-solids , 1996 .

[69]  Byung-Min Kim,et al.  Finite-element simulation of the shear process using the element-kill method , 1997 .

[70]  Luen Chow Chan,et al.  Application of the finite-element deformation method in the fine blanking process , 1997 .

[71]  Viggo Tvergaard,et al.  Dynamic crack growth in a nonlocal progressively cavitating solid , 1998 .

[72]  Taylan Altan,et al.  Precision shearing of billets—special equipment and process simulation , 1997 .

[73]  P. Raviart,et al.  On a Finite Element Method for Solving the Neutron Transport Equation , 1974 .

[74]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[75]  Steven R Schmid Kalpakjian,et al.  Manufacturing Engineering and Technology , 1991 .

[76]  J. C. Rice,et al.  On numerically accurate finite element solutions in the fully plastic range , 1990 .

[77]  N. Bićanić,et al.  Simulation of progressive fracturing under dynamic loading conditions , 1997 .

[78]  O. C. Zienkiewicz,et al.  The superconvergent patch recovery (SPR) and adaptive finite element refinement , 1992 .

[79]  Ronald A. Walsh.  McGraw-Hill machining and metalworking handbook , 1998 .

[80]  S. R. Bodner,et al.  Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials , 1975 .

[81]  Ahmed Benallal,et al.  Continuum damage mechanics and local approach to fracture: Numerical procedures , 1991 .

[82]  Claes Johnson.  Numerical solution of partial differential equations by the finite element method , 1988 .

[83]  Frank P. T. Baaijems.  An U-ALE formulation of 3-D unsteady viscoelastic flow , 1993 .

[84]  M. B. Rubin,et al.  A time integration procedure for plastic deformation in elastic-viscoplastic metals , 1989 .

[85]  Paul A. Wawrzynek,et al.  Quasi-automatic simulation of crack propagation for 2D LEFM problems , 1996 .

[86]  Harold Liebowitz,et al.  Computational fracture mechanics: Research and application , 1995 .

[87]  R. Kienzler,et al.  The J-integral concept for elastic-plastic material behavior , 1989 .

[88]  G. Spur,et al.  Handbuch der Fertigungstechnik , 1979 .

[89]  R. Narasimhan,et al.  A finite element study of the effect of void initiation and growth on mixed-mode ductile fracture , 1997 .

[90]  Wang Tiejun.  Improvements of j-integral criterion for ductile fracture characterized by a triaxiality parameter , 1994 .