Experimental study of nanofluid effects on the thermal performance with response time of heat pipe

Abstract Nanofluids, which are suspensions of nanoparticles in base fluids, have been introduced as new enhanced media for heat transfer, especially during the last decade. An experimental investigation has been carried out on nanofluid effects on the thermal performance of a medium-sized cylindrical meshed heat pipe, in both transient and steady states. Thermal resistance and response time of the heat pipe are the characteristics of transient and steady states, respectively. In the present study, the response time is defined based on the variation of the heat pipe surface temperature. Suspensions of silver nanoparticles in DI-water were utilized in various concentrations of 50, 200 and 600 ppm. The experiments have been performed under heat rates in the range 300–500 W. The least utilized concentration of nanofluid resulted in the best performance. Some discussions are presented for reverse and negative effects of high concentration nanofluids. Whereas the heat pipe operation with DI-water was more stable, by using nanofluids, the thermal resistance and response time of the heat pipe decreased up to 30% and 20%, respectively, compared to DI-water.

[1]  J. Koo,et al.  A new thermal conductivity model for nanofluids , 2004 .

[2]  Y. Xuan,et al.  Investigation on Convective Heat Transfer and Flow Features of Nanofluids , 2003 .

[3]  Paisarn Naphon,et al.  Heat pipe efficiency enhancement with refrigerant–nanoparticles mixtures , 2009 .

[4]  K. Vafai,et al.  Analysis of cylindrical heat pipes incorporating the effects of liquid–vapor coupling and non-Darcian transport—a closed form solution , 1999 .

[5]  Paisarn Naphon,et al.  Experimental investigation of titanium nanofluids on the heat pipe thermal efficiency , 2008 .

[6]  Amir Faghri,et al.  Transient lumped heat pipe analyses , 1994 .

[7]  Stephen U. S. Choi.  Enhancing thermal conductivity of fluids with nano-particles , 1995 .

[8]  Stephen U. S. Choi,et al.  Role of Brownian motion in the enhanced thermal conductivity of nanofluids , 2004 .

[9]  Wenhua Yu,et al.  Nanofluids: Science and Technology , 2007 .

[10]  V. Bianco,et al.  An investigation of the thermal performance of cylindrical heat pipes using nanofluids , 2010 .

[11]  S. Kim,et al.  Study of pool boiling and critical beat flux enhancement in nanofluids , 2007 .

[12]  Shung-Wen Kang,et al.  Experimental investigation of silver nano-fluid on heat pipe thermal performance , 2006 .

[13]  T. Mckrell,et al.  Infrared thermometry study of nanofluid pool boiling phenomena , 2011, Nanoscale research letters.

[14]  Yu-Tang Chen,et al.  EXPERIMENTAL STUDY OF SILVER NANOFLUID ON FLAT HEAT PIPE THERMAL PERFORMANCE , 2010 .

[15]  Somchai Wongwises,et al.  Critical review of heat transfer characteristics of nanofluids , 2007 .

[16]  Lei Gao,et al.  Differential effective medium theory for thermal conductivity in nanofluids , 2006 .

[17]  Ping-Hei Chen,et al.  Effect of structural character of gold nanoparticles in nanofluid on heat pipe thermal performance , 2004 .

[18]  B. Wang,et al.  A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles , 2003 .

[19]  Wenhua Yu,et al.  The Role of Interfacial Layers in the Enhanced Thermal Conductivity of Nanofluids: A Renovated Maxwell Model , 2003 .

[20]  A. Shih,et al.  Effects of nanoparticle layering on nanofluid and base fluid pool boiling heat transfer from a horizontal surface under atmospheric pressure , 2010 .

[21]  Shung-Wen Kang,et al.  Experimental investigation of nanofluids on sintered heat pipe thermal performance , 2009 .

[22]  K. Leong,et al.  A model for the thermal conductivity of nanofluids – the effect of interfacial layer , 2006 .