Prediction and experimental verification of phase transformation plasticity
暂无分享,去创建一个
Shungui Zuo | Bo Wang | Qiang Li | Yu Liu | Yongchen Huo
[1] N. Chen,et al. A New Understanding of Transformation Induced Plasticity (Trip) Effect , 2022, SSRN Electronic Journal.
[2] Q. Zeng,et al. The Relationship between Austenite Morphology and Continuous Trip Effects in Forged 4mn Steel , 2022, SSRN Electronic Journal.
[3] A. Monsalve,et al. Effect of Bainitic Isothermal Treatment on the Microstructure and Mechanical Properties of a CMnSiAl TRIP Steel , 2022, Metals.
[4] C. Predescu,et al. Comparative Evaluation of the TRIP Effect in Steels with Different Contents of Mn and Al , 2022, Metals.
[5] L. Zuev,et al. Kinetics of strain-induced phase transformation in TRIP steel , 2021 .
[6] Shanping Lu,et al. Transformation plasticity of AF1410 steel and its influences on the welding residual stress and distortion: Experimental and numerical study , 2021, Materials Science and Engineering: A.
[7] M. Wang,et al. Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate , 2020 .
[8] N. Legrand,et al. Effect of Cooling Rate on Transformation Plasticity of 0.45% Carbon Steel , 2020, ISIJ International.
[9] Youxin Zhu,et al. Experiment research on the transformation plasticity by tensile/compressive stress and transformation kinetics during the martensitic transformation of 30Cr2Ni4MoV steel , 2020, Materials Research Express.
[10] Di Wu,et al. Effect of matrix structures on TRIP effect and mechanical properties of low-C low-Si Al-added hot-rolled TRIP steels , 2020 .
[11] Donghui Li,et al. Effect of stresses on martensite transformation kinetics and transformation plasticity of S34MnV steel , 2019, Materials Research Express.
[12] Guang Xu,et al. Effects of Plastic Stress on Transformation Plasticity and Microstructure of a Carbide-Free Bainite Steel , 2019, Metallography, Microstructure, and Analysis.
[13] Qiang Li,et al. Martensite Transformation Plasticity and Influence of Stress on Phase Transformation Kinetics of Cr5 Steel , 2018 .
[14] C. Şimşir. Transformation Induced Plasticity (TRIP) of SAE 52100 Steel during Martensitic and Bainitic Transformations , 2017 .
[15] Ying Wang,et al. Influence of Transformation Plasticity on the Distribution of Internal Stress in Three Water-Quenched Cylinders , 2017, Metallurgical and Materials Transactions A.
[16] Lin Chen,et al. Effects of Applied Stress on Isothermal Phase Transformation of Austenite to Pearlite in Heavy Rail Steels: An Experimental and Modeling Study , 2016, Metallography, Microstructure, and Analysis.
[17] D. Ju,et al. Study on Transformation Plasticity Behavior of Material SUS420J2 , 2015 .
[18] K. Oshita,et al. Experimental Study on Transformation Plasticity in Terms of Three-Point Bending System , 2014 .
[19] Jae Kon Lee,et al. Analysis of Transformation Plasticity in Steel Using a Finite Element Method Coupled with a Phase Field Model , 2012, PloS one.
[20] Takayuki Imai,et al. Effect of Volume Expansion on Transformation Plasticity during Ferrite and Martensite Transformation of Steel , 2011 .
[21] Hao Lu,et al. Experimental analysis of transformation induced plasticity in 9Cr1Mo steel , 2009 .
[22] D. Suh,et al. Diffusion-controlled transformation plasticity of steel under externally applied stress , 2007 .
[23] G. Löwisch,et al. Transformation plasticity at different phase transformations of bearing steel , 2006 .
[24] V. Schulze,et al. Influence of transformation plasticity on residual stresses and distortions due to the heat treatment of steels with different carbon contents , 2004 .
[25] D. Suh,et al. A model for transformation plasticity during bainite transformation of steel under external stress , 2003 .
[26] Alain Combescure,et al. Experimental study of the phase transformation plasticity of 16MND5 low carbon steel under multiaxial loading , 2002 .
[27] K. Yao,et al. Models for transformation plasticity in loaded steels subjected to bainitic and martensitic transformation , 2001 .
[28] E. Werner,et al. A new view on transformation induced plasticity (TRIP) , 2000 .
[29] S. Chandrasekar,et al. Experimental and Computational Study of the Quenching of Carbon Steel , 1997 .
[30] Franz Dieter Fischer,et al. Transformation-Induced Plasticity (TRIP) , 1996 .
[31] G. Beck,et al. Stress–phase-transformation interactions – basic principles, modelling, and calculation of internal stresses , 1985 .
[32] J. Poirier. On transformation plasticity , 1982 .
[33] Dieter. Fahr,et al. ENHANCEMENT OF DUCTILITY IN HIGH STRENGTH STEELS , 1969 .
[34] G. W. Greenwood,et al. The deformation of metals under small stresses during phase transformations , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[35] Z. Jiao,et al. Cu-assisted austenite reversion and enhanced TRIP effect in maraging stainless steels , 2022, Journal of Materials Science & Technology.
[36] Chen Li. Stress influence on pearlite transition phase transformation plasticity of U75V heavy rail steel , 2014 .
[37] C. Qian. Experimental research of transformation plasticity for Q460D steel , 2013 .
[38] Guo Jianfeng,et al. Transformation plasticity of martensitic transformation and effect of stress on its kinetics in 3Cr2Mo steel , 2011 .
[39] Tatsuo Inoue,et al. Identification of Transformation Plasticity Coefficient for Some Steels during Pearlite Transformation and the Dependence on Chemical Composition , 2008 .
[40] Lakhdar Taleb,et al. New investigations on transformation induced plasticity and its interaction with classical plasticity , 2006 .
[41] Lakhdar Taleb,et al. Experimental analysis of transformation plasticity , 2001 .
[42] C. Thk. Transformation Plasticity─The Effect on Metallo-Thermo-Mechanical Simulation of Carburized Quenching Process , 2000 .
[43] Georges Cailletaud,et al. Experimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel , 1996 .
[44] J. Devaux,et al. Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases , 1989 .
[45] S. Denis,et al. Modelling of the Mechanical Behaviour of Steels During Phase Transformation : A Review , 1989 .