Flocculation performance of lignin-based flocculant during reactive blue dye removal: comparison with commercial flocculants

[1]  A. Jayakrishnan,et al.  Synthesis and evaluation of anti-fungal activities of sodium alginate-amphotericin B conjugates. , 2017, International journal of biological macromolecules.

[2]  Wei Wang,et al.  All cellulose composites based on cellulose diacetate and nanofibrillated cellulose prepared by alkali treatment. , 2018, Carbohydrate polymers.

[3]  Tianji Li,et al.  Influence of relative proportions of cellulose and lignin on carbon-based solid acid for cellulose hydrolysis , 2017 .

[4]  P. Guerrero,et al.  Chitosan as a bioactive polymer: Processing, properties and applications. , 2017, International journal of biological macromolecules.

[5]  Q. Feng,et al.  The effect of sodium alginate on the flotation separation of scheelite from calcite and fluorite , 2017 .

[6]  M. Panhuis,et al.  Synthesis and characterisation of MWNT/chitosan and MWNT/chitosan-crosslinked buckypaper membranes for desalination , 2017 .

[7]  B. Gao,et al.  Effects of papermaking sludge-based polymer on coagulation behavior in the disperse and reactive dyes wastewater treatment. , 2017, Bioresource technology.

[8]  Aimin Li,et al.  Dual functionality of a graft starch flocculant: Flocculation and antibacterial performance. , 2017, Journal of environmental management.

[9]  Dongsheng Wang,et al.  Influence of coagulation mechanisms and floc formation on filterability. , 2017, Journal of environmental sciences.

[10]  E. Dinjus,et al.  Direct liquefaction of lignin and lignin rich biomasses by heterogenic catalytic hydrogenolysis , 2017 .

[11]  Dongyuan Zhang,et al.  Advances in modifying lignin structures for largely enhancing high-lignin biomass saccharification , 2017 .

[12]  Yuan Yu,et al.  Compositional and structural characteristics of sulfated polysaccharide from Enteromorpha prolifera. , 2017, Carbohydrate polymers.

[13]  A. Garg,et al.  Physico-chemical treatment of pulping effluent: Characterization of flocs and sludge generated after treatment , 2017 .

[14]  B. Gao,et al.  Synthesis, characterization of a novel lignin-based polymer and its behavior as a coagulant aid in coagulation/ultrafiltration hybrid process , 2016 .

[15]  P. Fatehi,et al.  Sulfomethylated kraft lignin as a flocculant for cationic dye , 2016 .

[16]  Aimin Li,et al.  Evaluation of chain architectures and charge properties of various starch-based flocculants for flocculation of humic acid from water. , 2016, Water research.

[17]  B. Gao,et al.  Adsorption-desorption behavior of magnetic amine/Fe3O4 functionalized biopolymer resin towards anionic dyes from wastewater. , 2016, Bioresource technology.

[18]  Yong Bok Lee,et al.  Potential of Melaleuca diosmifolia as a novel, non-conventional and low-cost coagulating adsorbent for removing both cationic and anionic dyes , 2016 .

[19]  P. Fatehi,et al.  Production of Flocculant from Thermomechanical Pulping Lignin via Nitric Acid Treatment , 2016 .

[20]  B. Gao,et al.  A novel Enteromorpha based hydrogel optimized with Box–Behnken response surface method: Synthesis, characterization and swelling behaviors , 2016 .

[21]  Xiaochang C. Wang,et al.  Poly aluminum chloride (PAC) enhanced formation of aerobic granules: Coupling process between physicochemical–biochemical effects , 2016 .

[22]  B. Gao,et al.  Compound bioflocculant used as a coagulation aid in synthetic dye wastewater treatment: The effect of solution pH , 2015 .

[23]  A. Ariffin,et al.  Polymeric flocculant based on cassava starch grafted polydiallyldimethylammonium chloride: Flocculation behavior and mechanism , 2015 .

[24]  Song Guo,et al.  Investigation on efficient adsorption of cationic dyes on porous magnetic polyacrylamide microspheres. , 2015, Journal of hazardous materials.

[25]  P. Fatehi,et al.  Preparation of cationic softwood kraft lignin and its application in dye removal , 2015 .

[26]  M. Noel,et al.  Fouling of nanofiltration membranes by dyes during brine recovery from textile dye bath wastewater , 2015 .

[27]  A. Maity,et al.  Synthesis and flocculation properties of gum ghatti and poly(acrylamide-co-acrylonitrile) based biodegradable hydrogels. , 2014, Carbohydrate polymers.

[28]  B. Gao,et al.  Effects of compound bioflocculant on coagulation performance and floc properties for dye removal. , 2014, Bioresource technology.

[29]  B. Gao,et al.  Effect of dose methods of a synthetic organic polymer and PFC on floc properties in dyeing wastewater coagulation process , 2014 .

[30]  M. Karabacak,et al.  A comparative study of selected disperse azo dye derivatives based on spectroscopic (FT-IR, NMR and UV-Vis) and nonlinear optical behaviors. , 2014, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[31]  M. Lindström,et al.  Modification of industrial softwood kraft lignin using Mannich reaction with and without phenolation pretreatment , 2014 .

[32]  B. Gao,et al.  Floc characterization and membrane fouling of polyferric-polymer dual/composite coagulants in coagulation/ultrafiltration hybrid process. , 2013, Journal of colloid and interface science.

[33]  Yan Wang,et al.  Flocculation kinetics and floc characteristics of dye wastewater by polyferric chloride–poly-epichlorohydrin–dimethylamine composite flocculant , 2013 .

[34]  B. Gao,et al.  Effect of dosing sequence and raw water pH on coagulation performance and flocs properties using dual-coagulation of polyaluminum chloride and compound bioflocculant in low temperature surface water treatment , 2013 .

[35]  B. Gao,et al.  Characterization of size, strength and structure of aluminum-polymer dual-coagulant flocs under different pH and hydraulic conditions. , 2013, Journal of hazardous materials.

[36]  S. Jellali,et al.  Characterization of ammonium retention processes onto cactus leaves fibers using FTIR, EDX and SEM analysis. , 2012, Journal of hazardous materials.

[37]  Yasir Al-Ani,et al.  Degradation of C.I. Reactive Blue 19 using combined iron scrap process and coagulation/flocculation by a novel Al(OH)3–polyacrylamide hybrid polymer , 2012 .

[38]  B. Gao,et al.  Coagulation performance and floc characteristics of aluminum sulfate using sodium alginate as coagulant aid for synthetic dying wastewater treatment , 2012 .

[39]  B. Gao,et al.  Removal of acid and direct dye by epichlorohydrin-dimethylamine: flocculation performance and floc aggregation properties. , 2012, Bioresource technology.

[40]  Farah Maria Drumond Chequer,et al.  Analyses of the genotoxic and mutagenic potential of the products formed after the biotransformation of the azo dye Disperse Red 1. , 2011, Toxicology in vitro : an international journal published in association with BIBRA.

[41]  B. Gao,et al.  Coagulation performance and floc properties of compound bioflocculant-aluminum sulfate dual-coagulant in treating kaolin-humic acid solution , 2011 .

[42]  Dongsheng Wang,et al.  Characterization of floc structure and strength: Role of changing shear rates under various coagulation mechanisms , 2011 .

[43]  Khai Ern Lee,et al.  Flocculation activity of novel ferric chloride–polyacrylamide (FeCl3-PAM) hybrid polymer , 2011 .

[44]  Yuzhong Zhang,et al.  Coagulation enhancement of exopolysaccharide secreted by an Antarctic sea-ice bacterium on dye wastewater , 2010 .

[45]  Xiaorong Xu,et al.  Synthesis of lignin-base cationic flocculant and its application in removing anionic azo-dyes from simulated wastewater. , 2010, Bioresource technology.

[46]  B. Gao,et al.  Effect of pH on the coagulation performance of Al-based coagulants and residual aluminum speciation during the treatment of humic acid-kaolin synthetic water. , 2010, Journal of hazardous materials.

[47]  B. Gao,et al.  Effect of dosing method on color removal performance and flocculation dynamics of polyferric-organic polymer dual-coagulant in synthetic dyeing solution , 2009 .

[48]  Liu Ruiping,et al.  Enhanced As(III) removal with permanganate oxidation, ferric chloride precipitation and sand filtration as pretreatment of ultrafiltration , 2009 .

[49]  H. Wenjie,et al.  Algae removal by ultrasonic irradiation–coagulation , 2009 .

[50]  Huijuan Liu,et al.  Effects of calcium ions on surface characteristics and adsorptive properties of hydrous manganese dioxide. , 2009, Journal of colloid and interface science.

[51]  Guibai Li,et al.  Breakage and re-growth of flocs formed by alum and PACl , 2009 .

[52]  Huijuan Liu,et al.  Effect of pH on the aluminum salts hydrolysis during coagulation process: formation and decomposition of polymeric aluminum species. , 2009, Journal of colloid and interface science.

[53]  B. Gao,et al.  The characterization and flocculation efficiency of composite flocculant iron salts–polydimethyldiallylammonium chloride , 2008 .

[54]  N. Hilal,et al.  The relationship between cation ions and polysaccharide on the floc formation of synthetic and activated sludge , 2008 .

[55]  Hanqing Yu,et al.  Gamma radiation-induced grafting of a cationic monomer onto chitosan as a flocculant. , 2007, Chemosphere.

[56]  Dongsheng Wang,et al.  Characterization of floc size, strength and structure under various coagulation mechanisms , 2006 .

[57]  Huijuan Liu,et al.  Characterization of the phosphate adsorption and morphology of sediment particles under simulative disturbing conditions. , 2006, Journal of hazardous materials.

[58]  G. Pan,et al.  Adsorption and flocculation behaviors of polydiallyldimethylammonium (PDADMA) salts: Influence of counterion , 2006 .