Influence of energy area densities on microstructure evolution and properties of laser direct energy deposited Ni-Co-Mn-Al-Y magnetic shape memory alloy

[1]  H. Xuan,et al.  Elastocaloric Effect and Magnetic Properties of Ni50Mn31.5Ti18Cu0.5 Shape Memory Alloy , 2022, Journal of Superconductivity and Novel Magnetism.

[2]  Suiyuan Chen,et al.  The dynamic recrystallization mechanism of ultrasonic power on non-contact ultrasonic-assisted direct laser deposited alloy steel , 2022, Materials Science and Engineering: A.

[3]  K. Ullakko,et al.  Giant 5.8% magnetic-field-induced strain in additive manufactured Ni-Mn-Ga magnetic shape memory alloy , 2022, Scripta Materialia.

[4]  C. Esling,et al.  Highly sensitive elastocaloric response in a directionally solidified Ni50Mn33In15.5Cu1.5 alloy with strong <001>A preferred orientation , 2022, Intermetallics.

[5]  Suiyuan Chen,et al.  Strength-ductility and corrosion resistance match mechanism of bainite/martensite dual phase 30Cr15MoY alloy steel , 2021, Materials Science and Engineering: A.

[6]  V. K. Nadimpalli,et al.  Towards the additive manufacturing of Ni-Mn-Ga complex devices with magnetic field induced strain , 2021, Additive Manufacturing.

[7]  M. Pavese,et al.  On the effect of rapid annealing on the microstructure and mechanical behavior of additively manufactured stainless steel by Laser Powder Bed Fusion , 2021, Materials Science and Engineering: A.

[8]  Hanfei Yan,et al.  Dislocation Microstructure and Its Influence on Corrosion Behavior in Laser Additively Manufactured 316L Stainless Steel , 2021 .

[9]  W. Maziarz,et al.  Microstructure and Magnetic Properties of Selected Laser Melted Ni-Mn-Ga and Ni-Mn-Ga-Fe Powders Derived from as Melt-Spun Ribbons Precursors , 2021, Metals.

[10]  Y. Elerman,et al.  Inverse Magnetocaloric Effect Related to the Magnetostructural Phase Transition in Quaternary Ni–Co–Mn–Al Alloy , 2021, Metallurgical and Materials Transactions A.

[11]  Kewei Zhang,et al.  Mechanical and elastocaloric effect of Fe and Co co-doped Ni–Mn–Al ferromagnetic shape memory alloys , 2021 .

[12]  K. Ullakko,et al.  Characterization of as-built and heat-treated Ni-Mn-Ga magnetic shape memory alloy manufactured via laser powder bed fusion , 2021 .

[13]  J. Pérez-Landazábal,et al.  Correlation between particle size and magnetic properties in soft-milled Ni45Co5Mn34In16 powders , 2021 .

[14]  Xing-gang Li,et al.  Effects of hot processes on microstructure evolution and tensile properties of FGH4096 Ni-based superalloy processed by Laser Powder Bed Fusion , 2021 .

[15]  D. Kong,et al.  About metastable cellular structure in additively manufactured austenitic stainless steels , 2021 .

[16]  T. Niendorf,et al.  Laser Powder Bed Fusion Processing of Fe-Mn-Al-Ni Shape Memory Alloy—On the Effect of Elevated Platform Temperatures , 2021, Metals.

[17]  Suiyuan Chen,et al.  Microstructure and properties of Ni-Co-Mn-Al magnetic shape memory alloy prepared by direct laser deposition and heat treatment , 2021 .

[18]  R. Kainuma,et al.  Abnormal grain growth in Fe–Mn–Al–Ni shape memory alloy with higher Al content , 2020 .

[19]  R. Banerjee,et al.  Additive manufacturing of magnetic materials , 2020, Progress in Materials Science.

[20]  A. Mostafaei,et al.  Mastering a 1.2 K hysteresis for martensitic para-ferromagnetic partial transformation in Ni-Mn(Cu)-Ga magnetocaloric material via binder jet 3D printing , 2020 .

[21]  R. Kainuma,et al.  Texture Formation in a Polycrystalline Fe–Ni–Co–Al–Ti–B Shape Memory Alloy , 2020, ISIJ International.

[22]  Xingjun Liu,et al.  Role of β(FeAl) nanoparticles in abnormal grain growth in the annealing of cast Cu-Al-Mn-Fe shape memory alloys , 2020 .

[23]  Yuhang Yao,et al.  EBSD investigation on the interface microstructure evolution of Ti-Al3Ti laminated composites during the preparation process , 2020 .

[24]  Suiyuan Chen,et al.  A new 50Cr6Ni2Y alloy steel prepared by Direct laser Deposition: Its design, microstructure and properties , 2020 .

[25]  M. Sun,et al.  Atomization simulation and preparation of 24CrNiMoY alloy steel powder using VIGA technology at high gas pressure , 2020 .

[26]  Jian Liu,et al.  Large elastocaloric effect in directionally solidified all-d-metal Heusler metamagnetic shape memory alloys , 2020 .

[27]  M. Caputo,et al.  Sintering effects on additive manufactured Ni–Mn–Ga shape memory alloys: a microstructure and thermal analysis , 2020, Journal of Materials Science.

[28]  Yu-hao Cao,et al.  Effect of the Solution Temperature on the Precipitates and Grain Evolution of IN718 Fabricated by Laser Additive Manufacturing , 2020, Materials.

[29]  Yanjin Lu,et al.  Characterization of lattice defects and tensile deformation of biomedical Co29Cr9W3Cu alloy produced by selective laser melting , 2019 .

[30]  Suiyuan Chen,et al.  Thermal behavior and grain evolution of 24CrNiMoY alloy steel prepared by pre-laid laser cladding technology , 2019, Optics & Laser Technology.

[31]  P. Han,et al.  The effect of Co on elastocaloric and mechanical properties of Ni-Co-Mn-Al alloys , 2019, Solid State Communications.

[32]  A. Salminen,et al.  Laser powder bed fusion of Ni-Mn-Ga magnetic shape memory alloy , 2019 .

[33]  Youwei Du,et al.  Enhanced elastocaloric effect and mechanical properties of Fe-doped Ni–Mn–Al ferromagnetic shape memory alloys , 2019, Intermetallics.

[34]  M. Salmi,et al.  Effect of process parameters on non-modulated Ni-Mn-Ga alloy manufactured using powder bed fusion , 2019, Additive Manufacturing.

[35]  A. Pathak,et al.  Giant enhancement of the magnetocaloric response in Ni–Co–Mn–Ti by rapid solidification , 2019, Acta Materialia.

[36]  Suiyuan Chen,et al.  Preparation and printability of high performance 15Cr13MoY alloy steel powder for direct laser deposition , 2019, Powder Metallurgy.

[37]  Balasubramanian Kandasubramanian,et al.  Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing , 2019, Chemical Engineering Journal.

[38]  C. L. Zhang,et al.  Martensitic transformation and magnetoresistance in Ni40Mn44-xCoxAl16 Heusler alloys , 2019, Solid State Communications.

[39]  Xingjun Liu,et al.  Excellent superelasticity of Cu-Al-Mn-Cr shape memory single crystal obtained only through annealing cast polycrystalline alloy , 2019, Scripta Materialia.

[40]  A. Salminen,et al.  First investigation on processing parameters for laser powder bed fusion of Ni-Mn-Ga magnetic shape memory alloy , 2019, Journal of Laser Applications.

[41]  Xingjun Liu,et al.  Abnormal grain growth in annealing cast Cu–Al–Mn–V alloys and their superelasticity , 2019, Smart Materials and Structures.

[42]  K. Ullakko,et al.  Ultrafast actuation of Ni-Mn-Ga micropillars by pulsed magnetic field , 2019, Scripta Materialia.

[43]  Xingjun Liu,et al.  Excellent superelasticity and fatigue resistance of Cu-Al-Mn-W shape memory single crystal obtained only through annealing polycrystalline cast alloy , 2019, Materials Science and Engineering: A.

[44]  Xingjun Liu,et al.  Low-cost Cu-based shape memory single crystals obtained by abnormal grain growth showing excellent superelasticity , 2019, Materialia.

[45]  Suiyuan Chen,et al.  The evolution of bainite and mechanical properties of direct laser deposition 12CrNi2 alloy steel at different laser power , 2019, Materials Science and Engineering: A.

[46]  R. Shah,et al.  Microstructure and porosity evolution during sintering of Ni-Mn-Ga wires printed from inks containing elemental powders , 2019, Intermetallics.

[47]  U. Lafont,et al.  Additive manufacturing — A review of 4D printing and future applications , 2018, Additive Manufacturing.

[48]  V. Khovaylo,et al.  Effect of disorder on magnetic properties and martensitic transformation of Co-doped Ni-Mn-Al Heusler alloy , 2018, Intermetallics.

[49]  A. Mostafaei,et al.  Sintering regimes and resulting microstructure and properties of binder jet 3D printed Ni-Mn-Ga magnetic shape memory alloys , 2018, Acta Materialia.

[50]  W. Maziarz,et al.  Direct Laser Deposition and Homogenization of Ni-Co-Mn-Sn Magnetocaloric Material , 2018, Microscopy and Microanalysis.

[51]  M. Chmielus,et al.  Properties of as-deposited and heat-treated Ni-Mn-Ga magnetic shape memory alloy processed by directed energy deposition , 2018, Journal of Alloys and Compounds.

[52]  Youwei Du,et al.  Large Magnetoresistance and Magnetic Field Induced Strain in Ni42.8Co7.7Mn38.8Al10.7 Heusler Alloy at Room Temperature , 2018, physica status solidi (a).

[53]  A. Hütten,et al.  Role of disorder when upscaling magnetocaloric Ni-Co-Mn-Al Heusler alloys from thin films to ribbons , 2018, Scientific Reports.

[54]  K. Ullakko,et al.  Giant magnetic-field-induced strain in Ni-Mn-Ga micropillars , 2018 .

[55]  Andrew Armstrong,et al.  4D Printing of Net Shape Parts Made from Ni-Mn-Ga Magnetic Shape-Memory Alloys , 2018 .

[56]  D. Raabe,et al.  In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy , 2018 .

[57]  Suiyuan Chen,et al.  Effect of Nano-Y2O3 on Microstructure and Crack Formation in Laser Direct-Deposited In Situ Particle-Reinforced Fe-Based Coatings , 2018, Journal of Materials Engineering and Performance.

[58]  R. Shah,et al.  Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders , 2018 .

[59]  K. Ullakko,et al.  Sensing Strain with Ni-Mn-Ga , 2018 .

[60]  Chee Kai Chua,et al.  Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials , 2017 .

[61]  Y. Araki,et al.  Ultra-large single crystals by abnormal grain growth , 2017, Nature Communications.

[62]  M. Caputo,et al.  A facile method for producing porous parts with complex geometries from ferromagnetic Ni-Mn-Ga shape memory alloys , 2017 .

[63]  K. Ullakko,et al.  Microstructural evolution and magnetic properties of binder jet additive manufactured Ni-Mn-Ga magnetic shape memory alloy foam , 2017 .

[64]  Yandong Wang,et al.  Enhanced cyclability of elastocaloric effect in boron-microalloyed Ni-Mn-In magnetic shape memory alloys , 2017 .

[65]  Wen-ru Sun,et al.  Elastocaloric effect in a Co50Ni20Ga30 single crystal , 2017 .

[66]  T. Niendorf,et al.  Effect of grain size on the superelastic response of a FeMnAlNi polycrystalline shape memory alloy , 2016 .

[67]  J. Dutkiewicz,et al.  Magneto-structural transformations in Ni50Mn37.5Sn12.5−xInx Heusler powders , 2016 .

[68]  Y. Rong,et al.  Grain size dependence of the martensite morphology – A phase-field study , 2016 .

[69]  R. Kainuma,et al.  Abnormal grain growth induced by cyclic heat treatment in Fe-Mn-Al-Ni superelastic alloy , 2016 .

[70]  Wen-ru Sun,et al.  Large elastocaloric effect at small transformation strain in Ni45Mn44Sn11 metamagnetic shape memory alloys , 2016 .

[71]  F. Hu,et al.  Critical dependence of magnetostructural coupling and magnetocaloric effect on particle size in Mn-Fe-Ni-Ge compounds , 2016, Scientific Reports.

[72]  I. Dincer,et al.  Structure and giant inverse magnetocaloric effect of epitaxial Ni-Co-Mn-Al films , 2014, 1410.8583.

[73]  A. Saxena,et al.  Caloric and Multicaloric Effects in Shape Memory Alloys , 2015 .

[74]  F. Nilséna,et al.  Characterization of Gas Atomized Ni-Mn-Ga powders , 2015 .

[75]  T. Baudin,et al.  Measurement of stored energy in Fe–48%Ni alloys strongly cold-rolled using three approaches: Neutron diffraction, Dillamore and KAM approaches , 2014 .

[76]  Xiao Xu,et al.  Entropy Change during Martensitic Transformation in Ni50-xCoxMn50-yAly Metamagnetic Shape Memory Alloys , 2014, Entropy.

[77]  Heping Li,et al.  Development of Cast Steel for Brake Disc of High-Speed Train , 2013 .

[78]  Yoshikazu Araki,et al.  Abnormal Grain Growth Induced by Cyclic Heat Treatment , 2013, Science.

[79]  A. Srinivasan,et al.  Effect of particle size on the magneto-caloric properties of Ni51Mn34In14Si1 alloy , 2013 .

[80]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[81]  Alexei Sozinov,et al.  12% magnetic field-induced strain in Ni-Mn-Ga-based non-modulated martensite , 2013 .

[82]  L. Li,et al.  Phase Transformation and Magnetic Property of Ni-Mn-Ga Powders Prepared by Dry Ball Milling , 2012, Journal of Materials Engineering and Performance.

[83]  W. Cai,et al.  Microstructure, phase transformation and mechanical properties of Ni–Mn–Ga–Y magnetic shape memory alloys , 2011 .

[84]  Yufeng Zheng,et al.  Effect of Y Addition on Mechanical Properties of Ni50Mn28Ga22 Magnetic Shape Memory Alloy , 2011 .

[85]  W. Ito,et al.  Observation of Reverse Transformation in Metamagnetic Shape Memory Alloy Ni40Co10Mn34Al16 by High-Field X-Ray Diffraction Measurements , 2010 .

[86]  M. Calcagnotto,et al.  Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD , 2010 .

[87]  Yan Feng,et al.  Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni–Mn–In alloys , 2009 .

[88]  K. Ishida,et al.  Magnetic field-induced reverse transformation in B2-type NiCoMnAl shape memory alloys , 2008 .

[89]  Z. Gao,et al.  Martensitic transformation and mechanical properties of Ni–Mn–Ga–Y ferromagnetic shape memory alloys , 2007 .

[90]  Chuanzhong Chen,et al.  The Effect of Rare Earth on the Structure and Performance of Laser Clad Coatings , 2006 .

[91]  R. Cochrane,et al.  Effects of rare earth additions on GMR of melt-spun Cu–Co–Ni ribbons , 2001 .

[92]  K. Ishida,et al.  Martensitic transformations in NiMnAl β phase alloys , 1996 .