Thermal and optical efficiency investigation of a parabolic trough collector

Abstract Solar energy utilization is a promising Renewable Energy source for covering a variety of energy needs of our society. This study presents the most well-known solar concentrating system, the parabolic trough collector, which is operating efficiently in high temperatures. The simulation tool of this analysis is the commercial software Solidworks which simulates complicated problems with an easy way using the finite elements method. A small parabolic trough collector model is designed and simulated for different operating conditions. The goal of this study is to predict the efficiency of this model and to analyze the heat transfer phenomena that take place. The efficiency curve is compared to a one dimensional numerical model in order to make a simple validation. Moreover, the temperature distribution in the absorber and inside the tube is presented while the heat flux distribution in the outer surface of the absorber is given. The heat convection coefficient inside the tube is calculated and compared with the theoretical one according to the literature. Also the angle efficiency modifier is calculated in order to predict the thermal and optical efficiency for different operating conditions. The final results show that the PTC model performs efficiently and all the calculations are validated.

[1]  Qi Liang,et al.  Geometric optimization on optical performance of parabolic trough solar collector systems using particle swarm optimization algorithm , 2015 .

[2]  S. Kalogirou.  A detailed thermal model of a parabolic trough collector receiver , 2012 .

[3]  D. A. Kouremenos,et al.  Solar radiation correlations for the Athens, Greece, area , 1985 .

[4]  Psang Dain Lin,et al.  Optimized variable-focus-parabolic-trough reflector for solar thermal concentrator system , 2012 .

[5]  D. Laforgia,et al.  Modelling and optimization of transparent parabolic trough collector based on gas-phase nanofluids , 2013 .

[6]  Fritz Zaversky,et al.  Object-oriented modeling for the transient performance simulation of parabolic trough collectors using molten salt as heat transfer fluid , 2013 .

[7]  Kun Wang,et al.  A detailed parameter study on the comprehensive characteristics and performance of a parabolic trough solar collector system , 2014 .

[8]  Moussa Zerrouki,et al.  Numerical simulation of solar parabolic trough collector performance in the Algeria Saharan region , 2014 .

[9]  Yuvaraj Pandian,et al.  Parabolic trough collector testing in the frame of the REACt project , 2008 .

[10]  J. Meyer,et al.  Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts , 2014 .

[11]  Wujun Wang,et al.  An experimental investigation of the heat losses of a U-type solar heat pipe receiver of a parabolic trough collector-based natural circulation steam generation system , 2013 .

[12]  Huan Zhang,et al.  Comparison of different heat transfer models for parabolic trough solar collectors , 2015 .

[13]  M. Yaghoubi,et al.  3D Thermal-structural Analysis of an Absorber Tube of a Parabolic Trough Collector and the Effect of Tube Deflection on Optical Efficiency , 2014 .

[14]  Yang Xu,et al.  Comparative and sensitive analysis for parabolic trough solar collectors with a detailed Monte Carlo ray-tracing optical model , 2014 .

[15]  K. Zabara,et al.  Estimation of the global solar radiation in Greece , 1986 .

[16]  Wujun Wang,et al.  An experimental investigation of a natural circulation heat pipe system applied to a parabolic trough solar collector steam generation system , 2012 .

[17]  Gur Mittelman,et al.  A novel power block for CSP systems , 2010 .

[18]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[19]  Taqiy Eddine Boukelia,et al.  Parabolic trough solar thermal power plant: Potential, and projects development in Algeria , 2013 .

[20]  Eduardo Zarza,et al.  Optical and thermal performance of large-size parabolic-trough solar collectors from outdoor experiments: A test method and a case study , 2014 .

[21]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[22]  Noureddine Said,et al.  A comparative study between parabolic trough collector and linear Fresnel reflector technologies , 2011 .

[23]  Eduardo Zarza,et al.  Parabolic-trough solar collectors and their applications , 2010 .

[24]  Mohammed S. Al-Soud,et al.  A 50 MW concentrating solar power plant for Jordan , 2009 .

[25]  Larbi Loukarfi,et al.  Estimation of the temperature, heat gain and heat loss by solar parabolic trough collector under Algerian climate using different thermal oils , 2013 .

[26]  Hongguang Jin,et al.  Performance analysis of a parabolic trough solar collector with non-uniform solar flux conditions , 2015 .

[27]  Victor César Pigozzo Filho,et al.  Experimental and Numerical Analysis of Thermal Losses of a Parabolic Trough Solar Collector , 2014 .

[28]  Juan Xiao,et al.  Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector , 2010 .

[29]  Alibakhsh Kasaeian,et al.  Heat transfer enhancement in parabolic trough collector tube using Al2O3/synthetic oil nanofluid , 2014 .

[30]  Yu Qiu,et al.  A detailed nonuniform thermal model of a parabolic trough solar receiver with two halves and two inactive ends , 2015 .

[31]  Mehmet Sait Söylemez,et al.  Thermo-mathematical modeling of parabolic trough collector , 2014 .

[32]  R. Pitchumani,et al.  Optimization of an encapsulated phase change material thermal energy storage system , 2014 .

[33]  Roberto Grena,et al.  Optical simulation of a parabolic solar trough collector , 2010 .

[34]  John A. Clark,et al.  An analysis of the technical and economic performance of a parabolic trough concentrator for solar industrial process heat application , 1982 .

[35]  Oriol Lehmkuhl,et al.  On the CFD&HT of the Flow around a Parabolic Trough Solar Collector under Real Working Conditions☆ , 2014 .

[36]  Jun Wang,et al.  An optimized model and test of the China’s first high temperature parabolic trough solar receiver , 2010 .

[37]  N. S. Suresh,et al.  Methodology for sizing the solar field for parabolic trough technology with thermal storage and hybridization , 2014 .

[38]  Jan Fabian Feldhoff,et al.  THERMAL MODELLING AND SIMULATION OF PARABOLIC TROUGH RECEIVER TUBES , 2010 .

[39]  Giampaolo Manzolini,et al.  Geometric analysis of three-dimensional effects of parabolic trough collectors , 2013 .

[40]  Fahad A. Al-Sulaiman,et al.  Techno-economic performance analysis of parabolic trough collector in Dhahran, Saudi Arabia , 2014 .

[41]  Aliakbar Akbarzadeh,et al.  Hybrid optimization algorithm for thermal analysis in a solar parabolic trough collector based on nanofluid , 2015 .

[42]  Xin Li,et al.  Dynamic test model for the transient thermal performance of parabolic trough solar collectors , 2013 .

[43]  Peng Zhang,et al.  Experimental and numerical heat transfer analysis of a V-cavity absorber for linear parabolic trough solar collector , 2014 .

[44]  Hongguang Jin,et al.  A three-dimensional simulation of a parabolic trough solar collector system using molten salt as heat transfer fluid , 2014 .