Prediction of interfacial behaviour of single flax fibre bonded to various matrices by simulation of microdroplet test

[1]  César A. Paltán,et al.  Micromechanical Model for Predicting the Tensile Properties of Guadua angustifolia Fibers Polypropylene-Based Composites , 2022, Polymers.

[2]  F. Chen,et al.  Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: A review , 2022, Journal of Materials Research and Technology.

[3]  R. D. T. Filho,et al.  Pull-out behavior and tensile response of natural fibers under different relative humidity levels , 2021, Construction and Building Materials.

[4]  V. Placet,et al.  A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects , 2021, Progress in Materials Science.

[5]  J. Tirillò,et al.  Low temperature plasma polymerization: An effective process to enhance the basalt fibre/matrix interfacial adhesion , 2021 .

[6]  S. Guessasma,et al.  Novel Insight into the Intricate Shape of Flax Fibre Lumen , 2021 .

[7]  C. Baley,et al.  Interfacial and mechanical characterisation of biodegradable polymer-flax fibre composites , 2021 .

[8]  H. Heim,et al.  Correlation of fiber orientation and fiber-matrix-interaction of injection-molded polypropylene cellulose fiber composites , 2020 .

[9]  Seyed Saeid Rahimian Koloor,et al.  Moisture Absorption Effects on Mode II Delamination of Carbon/Epoxy Composites , 2020, Polymers.

[10]  Shashi Bahl,et al.  Finite element modeling and simulation of the fiber–matrix interface in fiber reinforced metal matrix composites , 2020 .

[11]  M. Misra,et al.  Studies on durability of sustainable biobased composites: a review , 2020, RSC advances.

[12]  C. Baley,et al.  Monitoring of mechanical performances of flax non-woven biocomposites during a home compost degradation , 2020 .

[13]  Seyed Saeid Rahimian Koloor,et al.  Fatigue damage of cohesive interfaces in fiber-reinforced polymer composite laminates , 2019, Composites Science and Technology.

[14]  A. Oushabi.  The pull-out behavior of chemically treated lignocellulosic fibers/polymeric matrix interface (LF/PM): A review , 2019, Composites Part B: Engineering.

[15]  J. Beaugrand,et al.  Main criteria of sustainable natural fibre for efficient unidirectional biocomposites , 2019, Composites Part A: Applied Science and Manufacturing.

[16]  M. Pletz,et al.  Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites , 2019, Procedia Structural Integrity.

[17]  S. Allaoui,et al.  A review of analytical models to describe pull-out behavior – Fiber/matrix adhesion , 2018, Composite Structures.

[18]  Mohammad Reza Khosravani,et al.  FE model-based construction and progressive damage processes of FRP composite laminates with different manufacturing processes , 2018, International Journal of Mechanical Sciences.

[19]  N. Moigne,et al.  Characterization of the Interface/Interphase in Natural Fibre Based Composites , 2018 .

[20]  S. Guessasma,et al.  Damage mechanisms in defected natural fibers , 2017, Scientific Reports.

[21]  P. Davies,et al.  Hygroscopic expansion: A key point to describe natural fibre/polymer matrix interface bond strength , 2017 .

[22]  S. Guessasma,et al.  Interfacial behaviour from pull-out tests of steel and aluminium fibres in unsaturated polyester matrix , 2017, Journal of Materials Science.

[23]  Yingguang Li,et al.  Interfacial shear strength of microwave processed carbon fiber/epoxy composites characterized by an improved fiber-bundle pull-out test , 2016 .

[24]  C. Baley,et al.  Multi-scale study of the adhesion between flax fibers and biobased thermoset matrices , 2014 .

[25]  G. Ziegmann,et al.  Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test results , 2014 .

[26]  D. Notta-Cuvier,et al.  An original approach for mechanical modelling of short-fibre reinforced composites with complex distributions of fibre orientation , 2014 .

[27]  P. Davies,et al.  Exploring durability of interfaces in flax fibre/epoxy micro-composites , 2013 .

[28]  E. Balnois,et al.  Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle , 2012 .

[29]  S. Guessasma,et al.  Three-phase model and digital image correlation to assess the interphase effect on the elasticity of carbohdyrate polymer-based composites reinforced with glass-silica beads , 2011 .

[30]  S. Guessasma,et al.  Effect of interface properties on the effective properties of biopolymer composite materials , 2010 .

[31]  P. Davies,et al.  Interfacial bonding of Flax fibre/Poly(L-lactide) bio-composites , 2010 .

[32]  J. Müssig,et al.  Enhancing the Fibre Matrix Adhesion of Natural Fibre Reinforced Polypropylene by Electron Radiation Analyzed with the Single Fibre Fragmentation Test , 2010 .

[33]  Yan Li,et al.  Determination of interfacial shear strength of white rot fungi treated hemp fibre reinforced polypropylene , 2009 .

[34]  P. Herrera-Franco,et al.  Mechanical properties of continuous natural fibre-reinforced polymer composites , 2004 .

[35]  Edith Mäder,et al.  How can adhesion be determined from micromechanical tests , 2001 .

[36]  Lawrence T. Drzal,et al.  Comparison of methods for the measurement of fibre/matrix adhesion in composites , 1992 .

[37]  Bernard Miller,et al.  A microbond method for determination of the shear strength of a fiber/resin interface , 1987 .

[38]  C. C. Chamis,et al.  Ten-deg off-axis test for shear properties in fiber composites , 1977 .

[39]  P. Petit.  A Simplified Method of Determining the Inplane Shear Stress-Strain Response of Unidirectional Composites , 1969 .