The development of foul-release coatings for seagoing vessels

This paper is a record of the work of an informal, interdisciplinary group, which contributed to the development of what has come to be known as foul-release coatings. These 'non-stick', non-toxic, antifouling coatings are essentially low surface energy, silicone elastomeric materials, which can be applied by airless spray. The paper opens with an account of the development of antifouling provision, the nature of biofouling and a review of the adhesion mechanisms of diatom slimes, macroalgae and barnacles. The physics and chemistry of low surface energy coatings are then described, followed by the specific research evidence of the difficulty of settlement and adhesion of biofouling to these coatings. The development of a practical product as an applicable low surface energy antifouling, is outlined, followed by an account of ongoing research into the surface characteristics and fluid drag of these novel coatings, not only on ship hulls but also on propellers. The paper closes with some account of the world-wide environmental and economic advantages of foul-release coatings.

[1]  Paul Gatenholm,et al.  Coating Modulus and Barnacle Bioadhesion , 2003, Biofouling.

[2]  Maureen E. Callow,et al.  A turbulent channel flow apparatus for the determination of the adhesion strength of microfouling organisms , 2000 .

[3]  I. L. Singer,et al.  Mechanical factors favoring release from fouling release coatings , 2000, Biofouling.

[4]  Mehmet Atlar,et al.  Lower Frictional Resistance Characteristics of Foul-release Systems , 2001 .

[5]  G Swain,et al.  Evaluation of the performance enhancement of silicone biofouling‐release coatings by oil incorporation , 2000, Biofouling.

[6]  M. Naldrett,et al.  The importance of sulphur cross-links and hydrophobic interactions in the polymerization of barnacle cement , 1993, Journal of the Marine Biological Association of the United Kingdom.

[7]  M. Schultz,et al.  The testing and evaluation of non-toxic antifouling coatings. , 1996, Biofouling.

[8]  Maureen E. Callow,et al.  Non-biocidal Anti-fouling Coatings , 1988 .

[9]  Mehmet Atlar,et al.  Calculation of the effects of new generation coatings on high speed propeller performance , 2003 .

[10]  Ralph S. Quatrano,et al.  MINIREVIEW—THE FIRST KISS: ESTABLISHMENT AND CONTROL OF INITIAL ADHESION BY RAPHID DIATOMS , 1998 .

[11]  R. L. Fletcher,et al.  The influence of low surface energy materials on bioadhesion — a review , 1994 .

[12]  Mehmet Atlar,et al.  Estimating the impact of new-generation antifoulings on ship performance: the presence of slime , 2003 .

[13]  M. Callow,et al.  Marine biofouling: a sticky problem. , 2002, Biologist.

[14]  G. López,et al.  The Influence of Surface Wettability on the Adhesion Strength of Settled Spores of the Green Alga Enteromorpha and the Diatom Amphora1 , 2002, Integrative and comparative biology.

[15]  M P Schultz,et al.  Three Models to Relate Detachment of Low Form Fouling at Laboratory and Ship Scale , 2003, Biofouling.

[16]  Maxim Candries,et al.  DRAG, BOUNDARY-LAYER AND ROUGHNESS CHARACTERISTICS OF MARINE SURFACES COATED WITH ANTIFOULINGS , 2001 .

[17]  Mehmet Atlar,et al.  The effect of a foul release coating on propeller performance , 2002 .

[18]  R. F. Brady.  IN SEARCH OF NON-STICK COATINGS , 1997 .

[19]  Maureen E. Callow,et al.  Adhesion Strength of Settled Spores of the Green Alga Enteromorpha , 2002 .

[20]  Richard Wetherbee,et al.  Cellular and molecular approaches to understanding primary adhesion in Enteromorpha: an overview , 2000 .

[21]  K. Kamino,et al.  Cement proteins of the acorn barnacle, Megabalanus rosa. , 1996, The Biological bulletin.

[22]  Maureen E. Callow,et al.  Use of Self-Assembled Monolayers of Different Wettabilities To Study Surface Selection and Primary Adhesion Processes of Green Algal (Enteromorpha) Zoospores , 2000, Applied and Environmental Microbiology.

[23]  Mehmet Atlar,et al.  Experimental Investigation of the Turbulent Boundary Layer of Surfaces Coated With Marine Antifoulings , 2005 .

[24]  G. Walker,et al.  A study of the cement apparatus of the cypris larva of the barnacle Balanus balanoides , 1971 .

[25]  L. V. Evans,et al.  Biofilms : recent advances in their study and control , 2000 .

[26]  J. Waite,et al.  The formation of mussel byssus: anatomy of a natural manufacturing process. , 1992, Results and problems in cell differentiation.

[27]  C W Grigson.  THE DRAG COEFFICIENTS OF A RANGE OF SHIP SURFACES II , 1983 .

[28]  Mehmet Atlar.  More than antifouling , 2003 .

[29]  R. L. Townsin,et al.  Fuel economy due to improvements in ship hull surface condition 1976–1986 , 1986 .

[30]  L. Epstein,et al.  MINIREVIEW—POLYPHENOLS AND OXIDASES IN SUBSTRATUM ADHESION BY MARINE ALGAE AND MUSSELS , 1998 .

[31]  M Atlar,et al.  The Measurement of the Drag Characteristics of Tin-free Self-polishing Co-polymers and Fouling Release Coatings Using a Rotor Apparatus , 2003, Biofouling.

[32]  Richard Wetherbee,et al.  PRIMARY ADHESION OF ENTEROMORPHA (CHLOROPHYTA, ULVALES) PROPAGULES: QUANTITATIVE SETTLEMENT STUDIES AND VIDEO MICROSCOPY 1 , 1997 .

[33]  Anne Meyer,et al.  Silicone Foul Release Coatings: Effect of the Interaction of Oil and Coating Functionalities on the Magnitude of Macrofouling Attachment Strengths , 2003, Biofouling.

[34]  M. Gretz,et al.  DIATOM EXTRACELLULAR POLYMERIC SUBSTANCES: FUNCTION, FINE STRUCTURE, CHEMISTRY, AND PHYSIOLOGY , 1993 .

[35]  R. Townsin.  The Ship Hull Fouling Penalty , 2003, Biofouling.

[36]  Kiyotaka Matsumura,et al.  Nature and perception of barnacle settlement pheromones , 2000, Biofouling.

[37]  A. Milne,et al.  Chapter 10 The Control of Fouling by Non-Biocidal Systems , 1986 .

[38]  Maureen E. Callow,et al.  Substratum location and zoospore behaviour in the fouling alga Enteromorpha , 2000, Biofouling.

[39]  Maureen E. Callow,et al.  Use of environmental scanning electron microscopy to image the spore adhesive of the marine alga Enteromorpha in its natural hydrated state , 2003 .