A modeling approach for understanding effects of powder flow properties on tablet weight variability

Abstract In this paper we focus on the effect of cohesion and compression speed on the outcome of the compression process for both monodisperse and polydisperse granular systems. A three dimensional discrete element model (DEM) which incorporates static and dynamic friction is used in this study to simulate die filling, and the compaction and decompaction of cohesive granular system in a confined cylindrical die similar to those used in a commercial tablet press driving the pre-compressive stage. The magnitude of the cohesive force is represented in terms of a parameter K = Fcohes/mg, where K is called the bond number and is the measure of cohesiveness. Force displacement curves are used to characterize the compression and deformation properties of the materials and are obtained by measuring the force on the upper punch and the corresponding displacements in the die. Results show that a considerable more energy is needed to compress the cohesive material as compared to free flowing materials. It is found that the time required to fill the die strongly depends on the cohesion of the material. The energy for the tableting process is directly proportional to the upper punch speed.

[1]  G. Alderborn,et al.  Pharmaceutical Powder Compaction Technology , 1995 .

[2]  I. C. Sinka,et al.  Measurement of the flow properties of powders with special reference to die fill. , 2004, International journal of pharmaceutics.

[3]  O. Antikainen,et al.  Determining the compression behaviour of pharmaceutical powders from the force-distance compression profile. , 2003, International journal of pharmaceutics.

[4]  Roland W. Lewis,et al.  A combined finite‐discrete element method for simulating pharmaceutical powder tableting , 2005 .

[5]  Risto,et al.  Density patterns in two-dimensional hoppers. , 1994, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[6]  G. H. Ristow,et al.  Dynamics of granular materials in a rotating drum , 1996 .

[7]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[8]  Two-phase densification of cohesive granular aggregates. , 2001, Physical review letters.

[9]  Christophe L. Martin,et al.  Study of particle rearrangement during powder compaction by the Discrete Element Method , 2003 .

[10]  Jamshed Anwar,et al.  Molecular dynamics simulations of granular compaction: The single granule case , 2003 .

[11]  O. Coube,et al.  Numerical simulation of metal powder die compaction with special consideration of cracking , 2000 .

[12]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[13]  Julio M. Ottino,et al.  Transverse flow and mixing of granular materials in a rotating cylinder , 1997 .

[14]  S. Luding.  Stress distribution in static two-dimensional granular model media in the absence of friction , 1997 .

[15]  Modelling powder compaction and pressure cycling , 2001 .

[16]  Colin Thornton,et al.  Numerical studies of uniaxial powder compaction process by 3D DEM , 2004 .

[17]  H. Lieberman,et al.  Pharmaceutical dosage forms : tablets , 1980 .

[18]  Collision-induced friction in the motion of a single particle on a bumpy inclined line. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[19]  Changquan Calvin Sun,et al.  Evaluation of the effects of tableting speed on the relationships between compaction pressure, tablet tensile strength, and tablet solid fraction. , 2005, Journal of pharmaceutical sciences.

[20]  Per-Lennart Larsson,et al.  On discrete element modelling of compaction of powders with size ratio , 2004 .

[21]  B. Schrefler,et al.  The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media , 1998 .

[22]  V. Rudolph,et al.  Interparticle van der Waals force in powder flowability and compactibility. , 2004, International journal of pharmaceutics.

[23]  Rajesh Ransing,et al.  Numerical comparison of a deformable discrete element model and an equivalent continuum analysis for the compaction of ductile porous material , 2001 .

[24]  Thompson,et al.  Granular flow: Friction and the dilatancy transition. , 1991, Physical review letters.

[25]  Fernando J. Muzzio,et al.  Cohesive effects in powder mixing in a tumbling blender , 2006 .

[26]  R. L. Braun,et al.  Viscosity, granular‐temperature, and stress calculations for shearing assemblies of inelastic, frictional disks , 1986 .

[27]  B. Briscoe,et al.  The interrelationship between the compaction behaviour and the mechanical strength of pure pharmaceutical tablets , 2005 .

[28]  Lianfeng Liu,et al.  Simulation of microstructural evolution during isostatic compaction of monosized spheres , 2003 .

[29]  I. C. Sinka,et al.  The effect of wall friction in the compaction of pharmaceutical tablets with curved faces: a validation study of the Drucker–Prager Cap model , 2003 .

[30]  D. Chulia,et al.  The use of energy indices in estimating powder compaction functionality of mixtures in pharmaceutical tableting. , 1999, International journal of pharmaceutics.