Kinematics constrained five-axis tool path planning for high material removal rate

Traditional five-axis tool path planning methods mostly focus on differential geometric characteristics between the cutter and the workpiece surface to increase the material removal rate (i.e., by minimizing path length, improving curvature matching, maximizing local cutting width, etc.). However, material removal rate is not only related to geometric conditions such as the local cutting width, but also constrained by feeding speed as well as the motion capacity of the five-axis machine. This research integrates machine tool kinematics and cutter-workpiece contact kinematics to present a general kinematical model for five-axis machining process. Major steps of the proposed method include: (1) to establish the forward kinematical relationship between the motion of the machine tool axes and the cutter contact point; (2) to establish a tool path optimization model for high material removal rate based on both differential geometrical property and the contact kinematics between the cutter and workpiece; (3) to convert cutter orientation and cutting direction optimization problem into a concave quadratic planning (QP) model. Tool path will finally be generated from the underlying optimal cutting direction field. Through solving the time-optimal trajectory generation problem and machining experiment, we demonstrate the validity and effectiveness of the proposed method.

[1]  Han Ding,et al.  Global optimization of tool path for five-axis flank milling with a cylindrical cutter , 2009 .

[2]  David J. Montana,et al.  The Kinematics of Contact and Grasp , 1988, Int. J. Robotics Res..

[3]  Stanislav S. Makhanov,et al.  Grid generation as applied to optimize cutting operations of the five-axis milling machine , 2003 .

[4]  Ye Ding,et al.  Variable-step integration method for milling chatter stability prediction with multiple delays , 2011 .

[5]  Yuan-Shin Lee,et al.  Surface interrogation and machining strip evaluation for 5-axis CNC die and mold machining , 1997 .

[6]  Frank Chongwoo Park,et al.  Smooth invariant interpolation of rotations , 1997, TOGS.

[7]  Han Ding,et al.  Generating collision-free tool orientations for 5-axis NC machining with a short ball-end cutter , 2010 .

[8]  Sanjeev Bedi,et al.  Tool path planning for five-axis machining using the principal axis method , 1997 .

[9]  Taejung Kim,et al.  Optimal sweeping paths on a 2-manifold: a new class of optimization problems defined by path structures , 2003, IEEE Trans. Robotics Autom..

[10]  Andreas Antoniou,et al.  Practical Optimization: Algorithms and Engineering Applications , 2007, Texts in Computer Science.

[11]  Stanislav S. Makhanov.  Optimization and correction of the tool path of the five-axis milling machine: Part 1. Spatial optimization , 2007, Math. Comput. Simul..

[12]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[13]  Han Ding,et al.  Third-order point contact approach for five-axis sculptured surface machining using non-ball-end tools (I): Third-order approximation of tool envelope surface , 2010 .

[14]  Jian Liu,et al.  Second order approximation of tool envelope surface for 5-axis machining with single point contact , 2008, Comput. Aided Des..

[15]  Elaine Cohen,et al.  Optimization-based virtual surface contact manipulation at force control rates , 2000, Proceedings IEEE Virtual Reality 2000 (Cat. No.00CB37048).

[16]  Han Ding,et al.  Third-order point contact approach for five-axis sculptured surface machining using non-ball-end tools (II): Tool positioning strategy , 2010 .

[17]  Taejung Kim,et al.  On actuator reversal motions of machine tools , 2004 .

[18]  John G. Griffiths,et al.  Toolpath based on Hilbert's curve , 1994, Comput. Aided Des..

[19]  Han Ding,et al.  Tool path optimisation for flank milling ruled surface based on the distance function , 2010 .

[20]  W. Anotaipaiboon,et al.  Tool path generation for five-axis NC machining using adaptive space-filling curves , 2005 .

[21]  Han Ding,et al.  Milling stability analysis using the spectral method , 2011 .

[22]  M. Anitescu,et al.  Formulating Three-Dimensional Contact Dynamics Problems , 1996 .

[23]  Han Ding,et al.  Formulating the swept envelope of rotary cutter undergoing general spatial motion for multi-axis NC machining , 2009 .

[24]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[25]  Han Ding,et al.  Wholly smoothing cutter orientations for five-axis NC machining based on cutter contact point mesh , 2010 .

[26]  Jordan J. Cox,et al.  Space-filling curves in tool-path applications , 1994, Comput. Aided Des..

[27]  P. Pardalos,et al.  Global minimization algorithms for concave quadratic programming problems , 2005 .

[28]  Bin Li,et al.  Time-frequency analysis and detecting method research on milling force token signal in spindle current signal , 2009 .

[29]  Bo Zhang,et al.  High-frequency interference in low strain integrity testing of large-diameter pipe piles , 2011 .