A Multiscale Model of a Disc Brake Including Material and Surface Heterogeneities

During friction it is well known that the real contact area is much lower to the theoretical one and that it evolves constantly during braking. It influences drastically the system’s performance. Conversely the system behavior modifies the loading conditions and consequently the contact surface area. This interaction between scales is well-known for the problematic of vibrations induced by friction but also for the thermomechanical behavior. Indeed, it is necessary to develop models combining a fine description of the contact interface and a model of the whole brake system. This is the aim of the present work.A multiscale strategy is propose to integrate the microscopic behavior of the interface in a macroscopic numerical model. Semi-analytical resolution is done on patches at the contact scale while FEM solution with contact parameters embedded the solution at the microscale is used. Asperities and plateaus are considered at the contact interface. FFT techniques are used to accelerate the resolution at the micro-scale. As an example the multiscale model is applied into a complex value analysis used to identify modal coupling in NVH simulations. With this model the interaction between non uniform surface and system dynamic behavior is clearly shown. The contact surface variations clearly affect the modal coupling and therefore noise propensity.

[1]  Daniel Nelias,et al.  A fast and efficient contact algorithm for fretting problems applied to fretting modes I, II and III , 2010 .

[2]  Peter Wriggers,et al.  Computational homogenization of rubber friction on rough rigid surfaces , 2013 .

[3]  Staffan Jacobson,et al.  On the nature of tribological contact in automotive brakes , 2002 .

[4]  Jean-François Brunel,et al.  Impact of contact stiffness heterogeneities on friction-induced vibration , 2014 .

[5]  Franck Massa,et al.  Experimental investigations for uncertainty quantification in brake squeal analysis , 2016 .

[6]  S. Andersson,et al.  A numerical method for real elastic contacts subjected to normal and tangential loading , 1994 .

[7]  Daniel Nelias,et al.  Contact analysis in presence of spherical inhomogeneities within a half-space , 2010 .

[8]  Philippe Dufrenoy,et al.  A multiscale method for frictionless contact mechanics of rough surfaces , 2016 .

[9]  Mark O. Robbins,et al.  Finite element modeling of elasto-plastic contact between rough surfaces , 2005 .

[10]  Michele Ciavarella,et al.  A “re-vitalized” Greenwood and Williamson model of elastic contact between fractal surfaces , 2006 .

[11]  G. Carbone,et al.  A new efficient numerical method for contact mechanics of rough surfaces , 2012 .

[12]  A. Volokitin,et al.  On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion. , 2005, Journal of physics. Condensed matter : an Institute of Physics journal.

[13]  D. J. Ewins,et al.  Mode lock-in characteristics and instability study of the pin-on-disc system , 2001 .

[14]  Hartmut Hetzler,et al.  On the influence of contact tribology on brake squeal , 2012 .

[15]  P. Wriggers,et al.  Multi-scale Approach for Frictional Contact of Elastomers on Rough Rigid Surfaces , 2009 .

[16]  Georges Cailletaud,et al.  Rough surface contact analysis by means of the Finite Element Method and of a new reduced model , 2011 .

[17]  Kai Willner,et al.  Fully Coupled Frictional Contact Using Elastic Halfspace Theory , 2008 .

[18]  H. Zahouani,et al.  Effect of roughness scale on contact stiffness between solids , 2009 .

[19]  Laurent Dubar,et al.  A methodology for the modelling of the variability of brake lining surfaces , 2012 .

[20]  P. Wriggers Finite element algorithms for contact problems , 1995 .

[21]  Randall J. Allemang,et al.  THE MODAL ASSURANCE CRITERION–TWENTY YEARS OF USE AND ABUSE , 2003 .

[22]  J. Molinari,et al.  Finite-element analysis of contact between elastic self-affine surfaces. , 2004, Physical review. E, Statistical, nonlinear, and soft matter physics.