Comparative studies on using RSM and TOPSIS methods to optimize residential air conditioning systems

Abstract The operating parameters of task/ambient air conditioning (TAC) systems including supply air temperature (ts) and air flow rate (Qs) were reported to have critical effects on energy savings and thermally comfortable environment. Due to the existing contradictions between these two aspects, a multi-objective study should be carried out to realize consuming minimum energy and at the same time to guarantee the thermal comfort level at suitable range. Two optimization methods were adopted in this study, one is the response surface methodology (RSM), and the other is the technique for order preferences by similarity to an ideal solution (TOPSIS) method. The objective of this study was to compare the pros and cons of these two methods. It was found that the optimum operating parameters obtained using RSM method were 26 °C (ts) and 28.94 l/s (Qs), corresponding to energy consumption (Qc) of 46.89 W and PMV of 0.11; while that obtained using TOPSIS method were 26 °C (ts) and 30 l/s (Qs), corresponding to energy consumption (Qc) of 49.64 W and PMV of 0.09. Furthermore, compared with TOPSIS method, there were only 9 cases used in RSM method saving 74% of computation cost.

[1]  Dongmei Pan,et al.  Thermal, ventilation and energy saving performance evaluations of a ductless bed-based task/ambient air conditioning (TAC) system , 2013 .

[2]  Zhao Li,et al.  Operating optimization for improved energy consumption of a TAC system affected by nighttime thermal loads of building envelopes , 2017 .

[3]  Claude E. Shannon,et al.  A mathematical theory of communication , 1948, MOCO.

[4]  Russell R. Barton,et al.  Ch. 7. A review of design and modeling in computer experiments , 2003 .

[5]  G. Mavrotas,et al.  Determining objective weights in multiple criteria problems: The critic method , 1995, Comput. Oper. Res..

[6]  Valter Silva,et al.  Combining a 2-D multiphase CFD model with a Response Surface Methodology to optimize the gasification of Portuguese biomasses , 2015 .

[7]  J. S. Hunter,et al.  Statistics for experimenters : an introduction to design, data analysis, and model building , 1979 .

[8]  Ching-Lai Hwang,et al.  Fuzzy Multiple Attribute Decision Making - Methods and Applications , 1992, Lecture Notes in Economics and Mathematical Systems.

[9]  Zhiqiang Zhai,et al.  Application of Computational Fluid Dynamics in Building Design: Aspects and Trends , 2006 .

[10]  Richard DeLoach,et al.  Hypersonic Wind Tunnel Calibration Using the Modern Design of Experiments , 2005 .

[11]  Jing Du,et al.  An experimental study on the performances of a radiation-based task/ambient air conditioning system applied to sleeping environments , 2017 .

[12]  J P Libert,et al.  Sweating responses and body temperatures during nocturnal sleep in humans. , 1987, The American journal of physiology.

[13]  Edmundas Kazimieras Zavadskas,et al.  The concept of the ideal indoor environment in multi-attribute assessment of dwelling-houses , 2011 .

[14]  Zhao Zhang,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and 1 Turbulence in Enclosed Environments by CFD : Part-1 : 2 Summary of Prevalent Turbulence Models 3 4 , 2007 .

[15]  Dongmei Pan,et al.  Performance evaluation of a novel bed-based task/ambient conditioning (TAC) system , 2012 .

[16]  Dongmei Pan,et al.  Optimization on the performances of a novel bed-based task/ambient conditioning (TAC) system , 2017 .

[17]  Hui Zhang,et al.  Testing and optimizing the performance of a floor-based task conditioning system , 1995 .

[18]  G. D. Raithby,et al.  A Finite-Volume Method for Predicting a Radiant Heat Transfer in Enclosures With Participating Media , 1990 .

[19]  Mark J. Anderson,et al.  RSM Simplified: Optimizing Processes Using Response Surface Methods for Design of Experiments, Second Edition , 2004 .

[20]  Qingyan Chen,et al.  A Procedure for Verification, Validation, and Reporting of Indoor Environment CFD Analyses , 2002 .

[21]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[22]  Andrew Kusiak,et al.  Modeling and optimization of HVAC energy consumption , 2010 .

[23]  Eusébio Z. E. Conceição,et al.  Evaluation of comfort level in desks equipped with two personalized ventilation systems in slightly warm environments , 2010 .

[24]  Endong Wang,et al.  Benchmarking whole-building energy performance with multi-criteria technique for order preference by similarity to ideal solution using a selective objective-weighting approach , 2015 .

[25]  Hui Zhang,et al.  Comfort, perceived air quality, and work performance in a low-power task–ambient conditioning system , 2008 .

[26]  Anastasios I. Stamou,et al.  Verification of a CFD model for indoor airflow and heat transfer , 2006 .

[27]  Shiming Deng,et al.  A study on the thermal comfort in sleeping environments in the subtropics : Developing a thermal comfort model for sleeping environments , 2008 .

[28]  P. J. Jones,et al.  Computational fluid dynamics for building air flow prediction—current status and capabilities , 1992 .

[29]  Shiming Deng,et al.  A study on the characteristics of nighttime bedroom cooling load in tropics and subtropics , 2004 .

[30]  Shian Gao,et al.  Energy saving and indoor thermal comfort evaluation using a novel local exhaust ventilation system for office rooms. , 2017 .

[31]  Lung-Chieh Lin,et al.  Evaluating and ranking the energy performance of office building using technique for order preference by similarity to ideal solution , 2011 .

[32]  Saman Rashidi,et al.  Heat transfer enhancement and pressure drop penalty in porous solar heat exchangers: A sensitivity analysis , 2015 .

[33]  Dongmei Pan,et al.  Parameter optimization for operation of a bed-based task/ambient air conditioning (TAC) system to achieve a thermally neutral environment with minimum energy use , 2017 .

[34]  Chandra Sekhar,et al.  Energy analysis of the personalized ventilation system in hot and humid climates , 2010 .

[35]  Hua Zhang,et al.  Comparison of indoor air temperatures of different under-floor heating pipe layouts , 2011 .

[36]  Arsen Krikor Melikov,et al.  Seat headrest-incorporated personalized ventilation: Thermal comfort and inhaled air quality , 2012 .

[37]  Ali Malkawi,et al.  Defining the Influence Region in neighborhood-scale CFD simulations for natural ventilation design , 2016 .

[38]  Jianlei Niu,et al.  Experimental study on a chair-based personalized ventilation system , 2007 .

[39]  Zhiwei Lian,et al.  Pilot study on the application of bedside personalized ventilation to sleeping people , 2013 .

[40]  Edward Ng,et al.  Response surface models for CFD predictions of air diffusion performance index in a displacement ventilated office , 2008 .

[41]  Pan Dongmei,et al.  Air-conditioning for sleeping environments in tropics and/or sub-tropics - a review , 2013 .

[42]  Shiming Deng,et al.  A questionnaire survey on sleeping thermal environment and bedroom air conditioning in high-rise residences in Hong Kong , 2006 .

[43]  Muhsin Kilic,et al.  Numerical analysis of air flow, heat transfer, moisture transport and thermal comfort in a room heat , 2011 .

[44]  D. Wyon,et al.  The Acceptable Air Velocity Range for Local Air Movement in The Tropics , 2006 .

[45]  Dongmei Pan,et al.  Performance evaluation of an air conditioning system with different heights of supply outlet applied to a sleeping environment , 2014 .

[46]  Ching-Lai Hwang,et al.  Multiple Attribute Decision Making: Methods and Applications - A State-of-the-Art Survey , 1981, Lecture Notes in Economics and Mathematical Systems.

[47]  M. Bezerra,et al.  Response surface methodology (RSM) as a tool for optimization in analytical chemistry. , 2008, Talanta.

[48]  Shinichi Tanabe,et al.  Thermal sensation and comfort with different task conditioning systems , 2007 .

[49]  Wontae Kim,et al.  Thermal characteristics of a personal environment module task air conditioning system: an experimental study , 2001 .

[50]  Timothy W. Simpson,et al.  Metamodels for Computer-based Engineering Design: Survey and recommendations , 2001, Engineering with Computers.