Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates

Abstract This work deals with the study of temperature and time dependency of tensile properties of a PA 12-based polymer. The range of variation of parameters in experiments was linked to in-service conditions of components manufactured with this material (temperature interval from −25 °C to 50 °C and average strain-rate magnitudes from 0.00028 s −1 to 9.4 s −1 ). For tests with different temperatures and low speed, an electro-mechanical machine, Zwick Z250, equipped with an incremental extensometer was used. To study the effect of strain rate at medium speeds, a servo-hydraulic system, Schenk PC63M, equipped with a strain-gauge extensometer was used, while at high speeds a servo-hydraulic machine, Instron VHS 160/20, equipped with a high-speed camera for strain evaluation by digital image correlation was employed. The changes of the rate of deformation with strain as well as elastic modulus variation with strain were studied. An increase in the elastic modulus and yield strength was observed with a drop in temperature and an increase in the strain-rate, temperature having a stronger influence on the variation of mechanical properties. The collected data was assembled in an elasto-plastic material model for finite-element simulations capable of rendering temperature- and strain-rate-dependency. The model was implemented in the commercial software Abaqus, yielding accurate results for all tests.

[1]  V. Silberschmidt,et al.  Viscoelastic Properties of Semi-Crystalline Thermoplastic Polymers: Dynamic Analysis and Creep , 2012 .

[2]  Yoshiharu Mutoh,et al.  Low cycle fatigue test for solders using non-contact digital image measurement system , 2002 .

[3]  Yang Wang,et al.  Tension testing of polycarbonate at high strain rates , 2009 .

[4]  Mary C. Boyce,et al.  Three-dimensional large-strain tensile deformation of neat and calcium carbonate-filled high-density polyethylene , 2005 .

[5]  R. D. Wood,et al.  Nonlinear Continuum Mechanics for Finite Element Analysis , 1997 .

[6]  Tiejun Wang,et al.  Large tensile deformation behavior of PC/ABS alloy , 2006 .

[7]  Stephen M. Walley,et al.  Review of experimental techniques for high rate deformation and shock studies , 2004 .

[8]  Deju Zhu,et al.  Non-contacting strain measurement for cement-based composites in dynamic tensile testing , 2012 .

[9]  J. L. Thorpe,et al.  Image analysis to measure strain in wood and paper , 1991, Wood Science and Technology.

[10]  D. W. Saunders,et al.  Large elastic deformations of isotropic materials VII. Experiments on the deformation of rubber , 1951, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[11]  H. S. D. C. Mattos,et al.  Mechanical behavior of polytetrafluoroethylene in tensile loading under different strain rates , 2011 .

[12]  Reinhold W. Lang,et al.  Strain determination of polymeric materials using digital image correlation , 2010 .

[13]  R. Ogden.  Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[14]  D. I. Bower,et al.  An Introduction to Polymer Physics: Frontmatter , 2002 .

[15]  L. Sperling.  Introduction to physical polymer science , 1986 .

[16]  Gérard Rio,et al.  High-speed tensile tests on a polypropylene material , 2010 .

[17]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[18]  L. Brinson,et al.  Polymer Engineering Science and Viscoelasticity: An Introduction , 2007 .

[19]  V. Silberschmidt,et al.  Behaviour of semi-crystalline thermoplastic polymers: Experimental studies and simulations , 2012 .

[20]  B. Zagar,et al.  Noncontacting strain measurements at high temperatures by the digital laser speckle technique , 2000 .

[21]  Mary C. Boyce,et al.  An experimental investigation of the large-strain tensile behavior of neat and rubber-toughened polycarbonate , 2004 .

[22]  H. G. Kilian,et al.  The use of the van der Waals model to elucidate universal aspects of structure-property relationships in simply extended dry and swollen rubbers , 1986 .

[23]  N. Petrinic,et al.  Introduction to computational plasticity , 2005 .

[24]  V. Silberschmidt,et al.  Response of semi-crystalline thermoplastic polymers to dynamic loading: A finite element study , 2012 .

[25]  Xinran Xiao.  On the measurement of true fracture strain of thermoplastics materials , 2008 .

[26]  Warren P. Mason,et al.  Introduction to polymer viscoelasticity , 1972 .

[27]  Bernhard Möginger,et al.  High rate tensile tests – Measuring equipment and evaluation , 2010 .

[28]  Optical measurement of the specimen deformation at high strain rate , 2004 .

[29]  Ahmed A. Shabana,et al.  Computational Continuum Mechanics , 2008 .

[30]  G. Strobl,et al.  The Physics of Polymers , 2009 .