Fabrication of Highly Conductive Poly(3,4‐ethylenedioxythiophene) Films by Vapor Phase Polymerization and Their Application in Efficient Organic Light‐Emitting Diodes

[1]  W. R. Salaneck,et al.  Transparent polymer cathode for organic photovoltaic devices , 2006 .

[2]  O. Inganäs,et al.  Stoichiometry dependence of charge transport in polymer/methanofullerene and polymer/C70 derivative based solar cells , 2006 .

[3]  K. Gleason,et al.  Oxidative Chemical Vapor Deposition of Electrically Conducting Poly(3,4-ethylenedioxythiophene) Films , 2006 .

[4]  Mats Andersson,et al.  A polymer photodiode using vapour-phase polymerized PEDOT as an anode , 2006 .

[5]  Franky So,et al.  Bipolar carrier transport in a conjugated polymer by complex admittance spectroscopy , 2005, SPIE Optics + Photonics.

[6]  Ping Chen,et al.  Effects of poly(ethylene glycol) on electrical conductivity of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) film , 2005 .

[7]  Richard H. Friend,et al.  Spin-cast thin semiconducting polymer interlayer for improving device efficiency of polymer light-emitting diodes , 2005 .

[8]  Franky So,et al.  Bipolar charge transport, injection, and trapping studies in a model green-emitting polyfluorene copolymer , 2005 .

[9]  F. Chen,et al.  High‐Conductivity Poly(3,4‐ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices , 2005 .

[10]  J. Huang,et al.  Investigation of the Effects of Doping and Post‐Deposition Treatments on the Conductivity, Morphology, and Work Function of Poly(3,4‐ethylenedioxythiophene)/Poly(styrene sulfonate) Films , 2005 .

[11]  Brett D. Martin,et al.  Towards a Transparent, Highly Conductive Poly(3,4‐ethylenedioxythiophene) , 2004 .

[12]  Keld West,et al.  Vapor-Phase Polymerization of 3,4-Ethylenedioxythiophene: A Route to Highly Conducting Polymer Surface Layers , 2004 .

[13]  Brett D. Martin,et al.  Hydroxylated secondary dopants for surface resistance enhancement in transparent poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) thin films , 2004 .

[14]  S. T. Lee,et al.  Concentration effect of glycerol on the conductivity of PEDOT film and the device performance , 2003 .

[15]  J. C. de Mello,et al.  Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films , 2003 .

[16]  Haeseong Lee,et al.  The preparation and characteristics of conductive poly(3,4-ethylenedioxythiophene) thin film by vapor-phase polymerization , 2003 .

[17]  William R. Salaneck,et al.  The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films , 2003 .

[18]  Karsten Heuser,et al.  Performance of flexible polymeric light-emitting diodes under bending conditions , 2003 .

[19]  G. Crawford,et al.  47.3: Reliability of Transparent Conducting Substrates for Rollable Displays: A Cyclic Loading Investigation , 2003 .

[20]  Jae Hoon Jung,et al.  Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents , 2002 .

[21]  Wilford N. Hansen,et al.  Standard reference surfaces for work function measurements in air , 2001 .

[22]  J. Reynolds,et al.  Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future , 2000 .

[23]  G. Crawford,et al.  Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates , 2000 .

[24]  R. Friend,et al.  Surface energy and polarity of treated indium–tin–oxide anodes for polymer light-emitting diodes studied by contact-angle measurements , 1999 .

[25]  Kok Wai Wong,et al.  CHARACTERIZATION OF TREATED INDIUM-TIN-OXIDE SURFACES USED IN ELECTROLUMINESCENT DEVICES , 1999 .

[26]  Adriano Cola,et al.  Increase of charge carriers density and reduction of Hall mobilities in oxygen-plasma treated indium–tin–oxide anodes , 1999 .

[27]  Zhang,et al.  Conductivity of metallic films and multilayers. , 1995, Physical review. B, Condensed matter.

[28]  F. Jonas,et al.  Poly(alkylenedioxythiophene)s—new, very stable conducting polymers , 1992 .

[29]  F. Jonas,et al.  Conductive modifications of polymers with polypyrroles and polythiophenes , 1991 .

[30]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.

[31]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[32]  Jaegab Lee,et al.  Selective vapor-phase deposition of conductive poly(3,4-ethylenedioxythiophene) thin films on patterned FeCl3 formed by microcontact printing , 2006 .