Processing defects and their relevance to strength in alumina ceramics made by slip casting

[1]  K. Uematsu,et al.  Formation mechanisms of processing defects and their relevance to the strength in alumina ceramics made by powder compaction process , 1999 .

[2]  K. Uematsu,et al.  Characterization of processing pores and their relevance to the strength in alumina ceramics , 1999 .

[3]  K. Uematsu,et al.  Origin of strength change in ceramics associated with the alteration of spray dryer , 1999 .

[4]  K. Uematsu,et al.  Effect of seasons on density, strength of alumina , 1999 .

[5]  K. Uematsu,et al.  Origin of Shape Deformation during Sintering of Alumina Compacts , 1998 .

[6]  Minoru Takahashi,et al.  The Adsorption Behavior of Dispersant Molecules and Rheological Properties of Highly Concentrated Alumina Slurries. , 1998 .

[7]  J. Ferreira.  Role of the clogging effect in the slip casting process , 1998 .

[8]  H. Kamiya,et al.  Optimization of suspension characteristics for shaping processes , 1997 .

[9]  J. Rödel,et al.  Reliability of alumina ceramics. 2: Effect of processing , 1997 .

[10]  K. Uematsu.  Immersion microscopy for detailed characterization of defects in ceramic powders and green bodies , 1996 .

[11]  Masahiko Nakamura,et al.  The Correlation Between the Casting Behaviour and the Particle Aggregated Structure of Fine Ceramics in a Concentrated Slurry , 1996 .

[12]  Hideo Takahashi,et al.  Influence of Granule Character and Compaction on the Mechanical Properties of Sintered Silicon Nitride , 1996 .

[13]  K. Uematsu,et al.  Effect of temperature on the slurry characteristics and green bodies of alumina , 1995 .

[14]  Hideo Takahashi,et al.  Influence of Slurry Flocculation on the Character and Compaction of Spray‐Dried Silicon Nitride Granules , 1995 .

[15]  K. Uematsu,et al.  Effect of Moisture Content of Granules on the Properties of Green and Sintered Bodies of Alumina Ceramics , 1994 .

[16]  H. Nomura,et al.  Effect of Preparation Conditions on Properties of Green and Sintered Body in Alumina , 1993 .

[17]  B. Ryu,et al.  Rheological Characteristics of Aqueous Alumina Slurry for Tape Casting , 1993 .

[18]  M. Inoue,et al.  Effect of processing conditions on the characteristics of pores in hot isostatically pressed alumina , 1993, Journal of Materials Science.

[19]  K. Uematsu,et al.  Direct Study of the Behavior of Flaw‐Forming Defect in Sintering , 1992 .

[20]  K. Kitajima,et al.  Burn-out of Binder and Sintering Behavior of Powder Compacts of Bimodally Distributed Alumina Powders with Stearic Acid and Polyethleneglycol , 1991 .

[21]  M. Janney,et al.  Gelcasting of Alumina , 1991 .

[22]  F. Lange,et al.  Powder Processing Science and Technology for Increased Reliability , 1989 .

[23]  Anthony G. Evans,et al.  Structural Reliability:A Processing‐Dependent Phenomenon , 1982 .

[24]  Nobuhiko Watanabe.  Studies on Slip Casting Control III , 1972 .