Fatigue on engine pistons - A compendium of case studies

Engine pistons are one of the most complex components among all automotive or other industry field components. The engine can be called the heart of a car and the piston may be considered the most important part of an engine. There are lots of research works proposing, for engine pistons, new geometries, materials and manufacturing techniques, and this evolution has undergone with a continuous improvement over the last decades and required thorough examination of the smallest details. Notwithstanding all these studies, there are a huge number of damaged pistons. Damage mechanisms have different origins and are mainly wear, temperature, and fatigue related. Among the fatigue damages, thermal fatigue and mechanical fatigue, either at room or at high temperature, play a prominent role. This work is concerned only with the analysis of fatigue-damaged pistons. Pistons from petrol and diesel engines, from automobiles, motorcycles and trains will be analyzed. Damages initiated at the crown, ring grooves, pin holes and skirt are assessed. A compendium of case studies of fatigue-damaged pistons is presented. An analysis of both thermal fatigue and mechanical fatigue damages is presented and analyzed in this work. A linear static stress analysis, using ‘‘cosmos works’’, is used to determine the stress distribution during the combustion. Stresses at the piston crown and pin holes, as well as stresses at the grooves and skirt as a function of land clearances are also presented. A fractographic study is carried out in order to confirm crack initiation sites. 2005 Elsevier Ltd. All rights reserved.

[1]  R. Krishna Kumar,et al.  Fracture mechanics approaches to coating strength evaluation , 1996 .

[2]  E. Broszeit,et al.  PVD CrxN coatings for tribological application on piston rings , 1997 .

[3]  P. Reed,et al.  Elevated temperature short crack fatigue behaviour in near eutectic Al–Si alloys , 2003 .

[4]  Y. Huang,et al.  Thermal behavior of short fiber reinforced AlSi12CuMgNi piston alloys , 2004 .

[5]  Masaaki Takiguchi,et al.  Characteristics of friction and lubrication of two-ring piston , 1995 .

[6]  Takashi Kikuchi.  Piston friction analysis using a direct-injection single-cylinder gasoline engine , 2003 .

[7]  H. Jeong,et al.  The Al-powder forging process: its finite element analysis , 2001 .

[8]  Filipe S. Silva,et al.  Analysis of a vehicle crankshaft failure , 2003 .

[9]  G. G. Martin.  Failure of a stationary pump engine piston , 2004 .

[10]  C. M. Taylor,et al.  Automobile engine tribology—design considerations for efficiency and durability , 1998 .

[11]  Tatsuya Suzuki,et al.  An analytical approach for prediction of piston temperature distribution in diesel engines , 2002 .

[12]  G. L. Shoemaker,et al.  Reactions at the matrix/reinforcement interface in aluminum alloy matrix composites , 1995 .

[13]  C. M. Taylor,et al.  Automobile Engine Tribology - Approaching the Surface , 2000 .

[14]  A.M.S. Hamouda,et al.  Experimental investigation for metal-filling system of pressure diecasting process on a cold chamber machine , 2001 .

[15]  I. Jasiuk,et al.  The effect of shot particles on the fatigue of Kaowool fiber-reinforced 339 aluminum , 1999 .

[16]  T. Stolarski,et al.  Temperature–friction characteristics of used lubricant from two-stroke cross-head marine diesel engines , 2002 .